Daily Papers

Compact token sequences are essential for efficient 3D generation. However, existing 3D tokenizers typically organize latent representations either over spatial regions or as fixed-size sets of global tokens, both suffering sharp reconstruction degradation when compressed to extremely low token budgets. In this paper, we present ZipTok3D, a 3D tokenizer designed for high-fidelity reconstruction from extremely short token sequences. Its key idea is to organize object geometry into progressively informative global-token prefixes and unfold these compact representations through iterative decoding. Specifically, nested dropout randomly truncates the latent sequence after encoding during training and requires each retained prefix to reconstruct the complete object, thereby prioritizing essential geometric information in the leading tokens. The decoder then repeatedly applies a parameter-shared Transformer block to recover fine-grained geometry from each prefix without a separate generative sampling stage. With the same token dimension, ZipTok3D achieves reconstruction quality comparable to the 32-token COD-VAE baseline using only one token on ShapeNet and four on TRELLIS, yielding 32times and 8times shorter token sequences, respectively.

Many LLM tasks are performed in large batches or even offline, and the performance indictor for which is throughput. These tasks usually show the characteristic of prefix sharing, where different prompt input can partially show the common prefix. However, the existing LLM inference engines tend to optimize the streaming requests and show limitations of supporting the large batched tasks with the prefix sharing characteristic. The existing solutions use the LRU-based cache to reuse the KV context of common prefix. The KV context that is about to be reused may prematurely be evicted with the implicit cache management. Even if not evicted, the lifetime of the shared KV context is extended since requests sharing the same context are not scheduled together, resulting in larger memory usage. These streaming oriented systems schedule the requests in the first-come-first-serve or similar order. As a result, the requests with larger ratio of decoding steps may be scheduled too late to be able to mix with the prefill chunks to increase the hardware utilization. Besides, the token and request number based batching can limit the size of token-batch, which keeps the GPU from saturating for the iterations dominated by decoding tokens. We propose BatchLLM to address the above problems. BatchLLM explicitly identifies the common prefixes globally. The requests sharing the same prefix will be scheduled together to reuse the KV context the best, which also shrinks the lifetime of common KV memory. BatchLLM reorders the requests and schedules the requests with larger ratio of decoding first to better mix the decoding tokens with the latter prefill chunks and applies memory-centric token batching to enlarge the token-batch sizes, which helps to increase the GPU utilization. Extensive evaluation shows that BatchLLM outperforms vLLM by 1.1x to 2x on a set of microbenchmarks and two typical industry workloads.

GRPO-based LLM post-training commonly samples multiple trajectories from the same prompt and then trains on the resulting group. In long-context GRPO workloads, this shared prompt-side prefix can contain retrieved passages, visual tokens, tool schemas, system instructions, or task context, while the full rollout group is still too large to pack into one training microbatch. Standard dense trainers therefore recompute the same prefix forward and backward for every trajectory. We present a schedule-level reuse mechanism that decouples prefix and suffix computation. The schedule runs prefix forward once, executes suffixes as ordinary microbatches while reading prefix K/V and accumulating prefix-side gK/gV , and then runs prefix backward once on the accumulated gradient cache. This reordered schedule is equivalent to baseline training over real arithmetic and aligns numerically within finite-precision tolerance. Because only K/V and gK/gV are hot during suffix computation, the approach offloads dormant prefix activations, integrates with TP/EP/CP/PP and DP-style placement at the execution level, and preserves aux-loss-based MoE router semantics through logical prefix-token accounting. On dense Llama3-8B, Qwen3-8B, and MoE Qwen3-MoE-30B-A3B configurations, the schedule matches optimizer updates across TP/CP/PP/EP combinations, aligns on a 100-step real GRPO actor-update trace replay, reaches up to 4.395x speedup (2.930x under a conservative compile-on comparison) as prefix ratio and GRPO group size grow, and reduces Phase-B peak HBM by up to 59.1%, extending the Llama3-8B capacity frontier from 17,920 to 29,696 total tokens.

Token-level code completion is one of the most critical features in modern Integrated Development Environments (IDEs). It assists developers by suggesting relevant identifiers and APIs during coding. While completions are typically derived from static analysis, their usefulness depends heavily on how they are ranked, as correct predictions buried deep in the list are rarely seen by users. Most current systems rely on hand-crafted heuristics or lightweight machine learning models trained on user logs, which can be further improved to capture context information and generalize across projects and coding styles. In this work, we propose a new scoring approach to ranking static completions using language models in a lightweight and model-agnostic way. Our method organizes all valid completions into a prefix tree and performs a single greedy decoding pass to collect token-level scores across the tree. This enables a precise token-aware ranking without needing beam search, prompt engineering, or model adaptations. The approach is fast, architecture-agnostic, and compatible with already deployed models for code completion. These findings highlight a practical and effective pathway for integrating language models into already existing tools within IDEs, and ultimately providing smarter and more responsive developer assistance.

Large Language Models (LLMs) encounter significant challenges in long-sequence inference due to computational inefficiency and redundant processing, driving interest in context compression techniques. Existing methods often rely on token importance to perform hard local compression or encode context into latent representations for soft global compression. However, the uneven distribution of textual content relevance and the diversity of demands for user instructions mean these approaches frequently lead to the loss of potentially valuable information. To address this, we propose Hybrid Context Compression (HyCo_2) for LLMs, which integrates both global and local perspectives to guide context compression while retaining both the essential semantics and critical details for task completion. Specifically, we employ a hybrid adapter to refine global semantics with the global view, based on the observation that different adapters excel at different tasks. Then we incorporate a classification layer that assigns a retention probability to each context token based on the local view, determining whether it should be retained or discarded. To foster a balanced integration of global and local compression, we introduce auxiliary paraphrasing and completion pretraining before instruction tuning. This promotes a synergistic integration that emphasizes instruction-relevant information while preserving essential local details, ultimately balancing local and global information retention in context compression. Experiments show that our HyCo_2 method significantly enhances long-text reasoning while reducing token usage. It improves the performance of various LLM series by an average of 13.1\% across seven knowledge-intensive QA benchmarks. Moreover, HyCo_2 matches the performance of uncompressed methods while reducing token consumption by 88.8\%.

As LLM agents are deployed in long-horizon sessions, context accumulation drives up inference costs. Existing approaches utilize text pruning or dynamic memory eviction to minimize token footprints; however, their unconstrained sequence mutations alter layouts, introducing prefix mismatches and cache invalidation. This reveals a critical trade-off between text sparsity and prompt cache continuity. To address this, we present TokenPilot, a dual-granularity context management framework. Globally, Ingestion-Aware Compaction acts as a framework harness to stabilize prompt prefixes and eliminate open-world environmental noise at the ingestion gate. Locally, Lifecycle-Aware Eviction monitors the ongoing residual utility of context segments, enforcing a conservative batch-turn schedule to offload content segments only when task relevance expires. Experiments on PinchBench and Claw-Eval under both isolated and continuous modes demonstrate that TokenPilot reduces costs by 61% and 56% in isolated mode, and 61% and 87% in continuous mode, while maintaining competitive performance compared to prior systems. TokenPilot has been integrated into LightMem2 at https://github.com/zjunlp/LightMem2.

Multimodal large language models (MLLMs) have attracted considerable attention due to their exceptional performance in visual content understanding and reasoning. However, their inference efficiency has been a notable concern, as the increasing length of multimodal contexts leads to quadratic complexity. Token compression techniques, which reduce the number of visual tokens, have demonstrated their effectiveness in reducing computational costs. Yet, these approaches have struggled to keep pace with the rapid advancements in MLLMs, especially the AnyRes strategy in the context of high-resolution image understanding. In this paper, we propose a novel token compression method, GlobalCom^2, tailored for high-resolution MLLMs that receive both the thumbnail and multiple crops. GlobalCom^2 treats the tokens derived from the thumbnail as the "commander" of the entire token compression process, directing the allocation of retention ratios and the specific compression for each crop. In this way, redundant tokens are eliminated while important local details are adaptively preserved to the highest extent feasible. Empirical results across 10 benchmarks reveal that GlobalCom^2 achieves an optimal balance between performance and efficiency, and consistently outperforms state-of-the-art token compression methods with LLaVA-NeXT-7B/13B models. Our code is released at https://github.com/xuyang-liu16/GlobalCom2.

Standard subword tokenization methods fragment numbers inconsistently, causing large language models (LLMs) to lose positional and decimal structure - a primary driver of errors in arithmetic and scientific reasoning. We introduce Triadic Suffix Tokenization (TST), a deterministic scheme that partitions digits into three-digit triads and annotates each triad with an explicit magnitude marker. Critically, the scheme defines a fixed, one-to-one mapping between suffixes and orders of magnitude for the integer part (thousands, millions, billions, etc.) and a parallel system of replicated markers for fractional depth (tenths, thousandths, millionths, etc.). Unlike approaches that rely on positional inference, this method provides a consistent gradient signal, which should ensure stable convergence. Two implementation variants are proposed: (1) a vocabulary-based approach that adds at most 10,000 fixed tokens to an existing vocabulary, covering 33 orders of magnitude (10^{-15} to 10^{18}); and (2) a suffix-marker approach that uses a small set of special tokens to denote magnitude dynamically. Both variants preserve exact digits while making order-of-magnitude relationships transparent at the token level. The framework is inherently scalable, allowing for linear vocabulary expansion to accommodate arbitrary precision and range. TST is architecture-agnostic and can be integrated as a drop-in preprocessing step. Experimental validation is deferred to future work.

Large language model (LLM) agents now execute long, tool-using tasks where final outcome checks can arrive too late for intervention. Online warning requires lightweight prefix monitors over heterogeneous traces, but hand-authored event schemas are brittle and deployment-time LLM judging is costly. We introduce PrefixGuard, a trace-to-monitor framework with an offline StepView induction step followed by supervised monitor training. StepView induces deterministic typed-step adapters from raw trace samples, and the monitor learns an event abstraction and prefix-risk scorer from terminal outcomes. Across WebArena, τ^2-Bench, SkillsBench, and TerminalBench, the strongest PrefixGuard monitors reach 0.900/0.710/0.533/0.557 AUPRC. Using the strongest backend within each representation, they improve over raw-text controls by an average of +0.137 AUPRC. LLM judges remain substantially weaker under the same prefix-warning protocol. We also derive an observability ceiling on score-based area under the precision-recall curve (AUPRC) that separates monitor error from failures lacking evidence in the observed prefix. For finite-state audit, post-hoc deterministic finite automaton (DFA) extraction remains compact on WebArena and τ^2-Bench (29 and 20 states) but expands to 151 and 187 states on SkillsBench and TerminalBench. Finally, first-alert diagnostics show that strong ranking does not imply deployment utility: WebArena ranks well yet fails to support low-false-alarm alerts, whereas τ^2-Bench and TerminalBench retain more actionable early alerts. Together, these results position PrefixGuard as a practical monitor-synthesis recipe with explicit diagnostics for when prefix warnings translate into actionable interventions.

Fine-tuning is the de facto way to leverage large pretrained language models to perform downstream tasks. However, it modifies all the language model parameters and therefore necessitates storing a full copy for each task. In this paper, we propose prefix-tuning, a lightweight alternative to fine-tuning for natural language generation tasks, which keeps language model parameters frozen, but optimizes a small continuous task-specific vector (called the prefix). Prefix-tuning draws inspiration from prompting, allowing subsequent tokens to attend to this prefix as if it were "virtual tokens". We apply prefix-tuning to GPT-2 for table-to-text generation and to BART for summarization. We find that by learning only 0.1\% of the parameters, prefix-tuning obtains comparable performance in the full data setting, outperforms fine-tuning in low-data settings, and extrapolates better to examples with topics unseen during training.

As large language models (LLMs) continue to advance, the demand for higher quality and faster processing of long contexts across various applications is growing. KV cache is widely adopted as it stores previously generated key and value tokens, effectively reducing redundant computations during inference. However, as memory overhead becomes a significant concern, efficient compression of KV cache has gained increasing attention. Most existing methods perform compression from two perspectives: identifying important tokens and designing compression strategies. However, these approaches often produce biased distributions of important tokens due to the influence of accumulated attention scores or positional encoding. Furthermore, they overlook the sparsity and redundancy across different heads, which leads to difficulties in preserving the most effective information at the head level. To this end, we propose EMS to overcome these limitations, while achieving better KV cache compression under extreme compression ratios. Specifically, we introduce a Global-Local score that combines accumulated attention scores from both global and local KV tokens to better identify the token importance. For the compression strategy, we design an adaptive and unified Evict-then-Merge framework that accounts for the sparsity and redundancy of KV tokens across different heads. Additionally, we implement the head-wise parallel compression through a zero-class mechanism to enhance efficiency. Extensive experiments demonstrate our SOTA performance even under extreme compression ratios. EMS consistently achieves the lowest perplexity, improves scores by over 1.28 points across four LLMs on LongBench under a 256 cache budget, and preserves 95% retrieval accuracy with a cache budget less than 2% of the context length in the Needle-in-a-Haystack task.

We present Neural Attention Search (NAtS), a framework that automatically evaluates the importance of each token within a sequence and determines if the corresponding token can be dropped after several steps. This approach can efficiently reduce the KV cache sizes required by transformer-based models during inference and thus reduce inference costs. In this paper, we design a search space that contains three token types: (i) Global Tokens will be preserved and queried by all the following tokens. (ii) Local Tokens survive until the next global token appears. (iii) Sliding Window Tokens have an impact on the inference of a fixed size of the next following tokens. Similar to the One-Shot Neural Architecture Search approach, this token-type information can be learned jointly with the architecture weights via a learnable attention mask. Experiments on both training a new transformer from scratch and fine-tuning existing large language models show that NAtS can efficiently reduce the KV cache size required for the models while maintaining the models' performance.

In quantised autoencoders, images are usually split into local patches, each encoded by one token. This representation is redundant in the sense that the same number of tokens is spend per region, regardless of the visual information content in that region. Adaptive discretisation schemes like quadtrees are applied to allocate tokens for patches with varying sizes, but this just varies the region of influence for a token which nevertheless remains a local descriptor. Modern architectures add an attention mechanism to the autoencoder which infuses some degree of global information into the local tokens. Despite the global context, tokens are still associated with a local image region. In contrast, our method is inspired by spectral decompositions which transform an input signal into a superposition of global frequencies. Taking the data-driven perspective, we learn custom basis functions corresponding to the codebook entries in our VQ-VAE setup. Furthermore, a decoder combines these basis functions in a non-linear fashion, going beyond the simple linear superposition of spectral decompositions. We can achieve this global description with an efficient transpose operation between features and channels and demonstrate our performance on compression.

The remarkable success of large language models (LLMs) has motivated researchers to adapt them as universal predictors for various graph tasks. As a widely recognized paradigm, Graph-Tokenizing LLMs (GTokenLLMs) compress complex graph data into graph tokens and treat them as prefix tokens for querying LLMs, leading many to believe that LLMs can understand graphs more effectively and efficiently. In this paper, we challenge this belief: Do GTokenLLMs fully understand graph tokens in the natural-language embedding space? Motivated by this question, we formalize a unified framework for GTokenLLMs and propose an evaluation pipeline, GTEval, to assess graph-token understanding via instruction transformations at the format and content levels. We conduct extensive experiments on 6 representative GTokenLLMs with GTEval. The primary findings are as follows: (1) Existing GTokenLLMs do not fully understand graph tokens. They exhibit over-sensitivity or over-insensitivity to instruction changes, and rely heavily on text for reasoning; (2) Although graph tokens preserve task-relevant graph information and receive attention across LLM layers, their utilization varies across models and instruction variants; (3) Additional instruction tuning can improve performance on the original and seen instructions, but it does not fully address the challenge of graph-token understanding, calling for further improvement.

Generative models, widely utilized in various applications, can often struggle with prompts corresponding to partial tokens. This struggle stems from tokenization, where partial tokens fall out of distribution during inference, leading to incorrect or nonsensical outputs. This paper examines a technique to alleviate the tokenization artifact on text completion in generative models, maintaining performance even in regular non-subword cases. The method, termed token alignment, involves backtracking to the last complete tokens and ensuring the model's generation aligns with the prompt. This approach showcases marked improvement across many partial token scenarios, including nuanced cases like space-prefix and partial indentation, with only a minor time increase. The technique and analysis detailed in this paper contribute to the continuous advancement of generative models in handling partial inputs, bearing relevance for applications like code completion and text autocompletion.

Test-time scaling uses extra test-time compute to improve performance, such as letting language models reason longer when solving a problem. As models keep the entire reasoning trace in memory via full attention, hard tasks that need long thinking can be prohibitively expensive. However, we find most intermediate reasoning tokens lose importance as the model continues reasoning. This calls into question whether retaining them is worth the cost. Based on this insight, we propose Prefix Sliding, which discards tokens during reasoning that are not part of the prefix or the window of the last few thousand tokens. The prefix has key instructions and tools available to the model, while the most recent tokens are the current reasoning the model is working on. This caps the total memory requirement regardless of how long the model reasons, allowing for efficient long-horizon test-time scaling. Without training, Prefix Sliding can make existing models 3x faster while maintaining performance. Training with Prefix Sliding using reinforcement learning can achieve better performance by enabling scaling to reasoning traces beyond a hundred thousand tokens. Ablations show Prefix Sliding outperforms summarizing intermediate tokens or vanilla sliding window. Our code is at https://github.com/Muennighoff/prefix-sliding

Pre-tokenization, the initial step in many modern tokenization pipelines, segments text into smaller units called pretokens, typically splitting on whitespace and punctuation. While this process encourages having full, individual words as tokens, it introduces a fundamental limitation in most tokenization algorithms such as Byte Pair Encoding (BPE). Specifically, pre-tokenization causes the distribution of tokens in a corpus to heavily skew towards common, full-length words. This skewed distribution limits the benefits of expanding to larger vocabularies, since the additional tokens appear with progressively lower counts. To overcome this barrier, we propose BoundlessBPE, a modified BPE algorithm that relaxes the pretoken boundary constraint. Our approach selectively merges two complete pretokens into a larger unit we term a superword. Superwords are not necessarily semantically cohesive. For example, the pretokens " of" and " the" might be combined to form the superword " of the". This merging strategy results in a substantially more uniform distribution of tokens across a corpus than standard BPE, and compresses text more effectively, with an approximate 20% increase in bytes per token.

Can Transformers predict new syllogisms by composing established ones? More generally, what type of targets can be learned by such models from scratch? Recent works show that Transformers can be Turing-complete in terms of expressivity, but this does not address the learnability objective. This paper puts forward the notion of 'globality degree' of a target distribution to capture when weak learning is efficiently achievable by regular Transformers, where the latter measures the least number of tokens required in addition to the tokens histogram to correlate nontrivially with the target. As shown experimentally and theoretically under additional assumptions, distributions with high globality cannot be learned efficiently. In particular, syllogisms cannot be composed on long chains. Furthermore, we show that (i) an agnostic scratchpad cannot help to break the globality barrier, (ii) an educated scratchpad can help if it breaks the globality at each step, however not all such scratchpads can generalize to out-of-distribution (OOD) samples, (iii) a notion of 'inductive scratchpad', that composes the prior information more efficiently, can both break the globality barrier and improve the OOD generalization. In particular, some inductive scratchpads can achieve length generalizations of up to 6x for some arithmetic tasks depending on the input formatting.

Webpages have been a rich, scalable resource for vision-language and language only tasks. Yet only pieces of webpages are kept: image-caption pairs, long text articles, or raw HTML, never all in one place. Webpage tasks have resultingly received little attention and structured image-text data left underused. To study multimodal webpage understanding, we introduce the Wikipedia Webpage suite (WikiWeb2M) of 2M pages. We verify its utility on three generative tasks: page description generation, section summarization, and contextual image captioning. We design a novel attention mechanism Prefix Global, which selects the most relevant image and text content as global tokens to attend to the rest of the webpage for context. By using page structure to separate such tokens, it performs better than full attention with lower computational complexity. Experiments show that the new annotations from WikiWeb2M improve task performance compared to data from prior work. We also include ablations on sequence length, input features, and model size.

Tokenization is the first -- and often least scrutinized -- step of most NLP pipelines. Standard algorithms for learning tokenizers rely on frequency-based objectives, which favor languages dominant in the training data and consequently leave lower-resource languages with tokenizations that are disproportionately longer, morphologically implausible, or even riddled with <UNK> placeholders. This phenomenon ultimately amplifies computational and financial inequalities between users from different language backgrounds. To remedy this, we introduce Parity-aware Byte Pair Encoding (BPE), a variant of the widely-used BPE algorithm. At every merge step, Parity-aware BPE maximizes the compression gain of the currently worst-compressed language, trading a small amount of global compression for cross-lingual parity. We find empirically that Parity-aware BPE leads to more equitable token counts across languages, with negligible impact on global compression rate and no substantial effect on language-model performance in downstream tasks.

Recent advancements in large language models(LLMs), such as GPT-4 and GPT-4o, have shown exceptional performance, especially in languages with abundant resources like English, thanks to extensive datasets that ensure robust training. Conversely, these models exhibit limitations when processing under-resourced languages such as Chinese and Korean, where issues including hallucinatory responses remain prevalent. This paper traces the roots of these disparities to the tokenization process inherent to these models. Specifically, it explores how the tokenizers vocabulary, often used to speed up the tokenization process and reduce tokens but constructed independently of the actual model training data, inadequately represents non-English languages. This misrepresentation results in the propagation of under-trained or untrained tokens, which perpetuate biases and pose serious concerns related to data security and ethical standards. We aim to dissect the tokenization mechanics of GPT-4o, illustrating how its simplified token-handling methods amplify these risks and offer strategic solutions to mitigate associated security and ethical issues. Through this study, we emphasize the critical need to rethink tokenization frameworks to foster more equitable and secure AI technologies. The code and data are available at https://github.com/yeyimilk/LLMGPT4o

Prefix-tuning is a powerful lightweight technique for adapting a large pre-trained language model to a downstream application. However, it uses the same dataset-level tuned prompt for all examples in the dataset. We extend this idea and propose a dynamic method, Control Prefixes, which allows for the inclusion of conditional input-dependent information, combining the benefits of prompt tuning and controlled generation. The method incorporates attribute-level learnable representations into different layers of a pre-trained transformer, allowing for the generated text to be guided in a particular direction. We provide a systematic evaluation of the technique and apply it to five datasets from the GEM benchmark for natural language generation (NLG). Although the aim is to develop a parameter-efficient model, we show Control Prefixes can even outperform full fine-tuning methods. We present state-of-the-art results on several data-to-text datasets, including WebNLG.

The Unigram tokenizer uses an elegant representation which makes it straightforward to edit vocabularies, but its training is comparatively heavy and complex. We introduce MinGram (Minimalist Unigram), which keeps the token-list representation but simplifies training using a BPE-derived seed vocabulary, Hard EM on a minimum-token path, and a single flat score-pruning step. This removes the suffix array, the forward-backward pass, and the iterative prune loop, leaving a procedure that requires little beyond tokenizer inference itself. By making token count the primary objective and using a Unigram score only as a tiebreak, MinGram keeps the compression of pure token-count methods while retaining much of the morphological alignment and downstream quality of probabilistic ones. Across six languages, MinGram compresses better than both BPE and standard Unigram, and a compression-oriented variant matches the strongest token-count compressors while retaining substantially higher morphological alignment. In controlled downstream language-model training, Unigram-family tokenizers, with MinGram among the best, consistently beat BPE in bits-per-byte.

Tokenisation is an integral part of the current NLP pipeline. Current tokenisation algorithms such as BPE and Unigram are greedy algorithms -- they make locally optimal decisions without considering the resulting vocabulary as a whole. We instead formulate tokeniser construction as a linear program and solve it using convex optimisation tools, yielding a new algorithm we call ConvexTok. We find ConvexTok consistently improves intrinsic tokenisation metrics and the bits-per-byte (BpB) achieved by language models; it also improves downstream task performance, but less consistently. Furthermore, ConvexTok allows the user to certify how far their tokeniser is from optimal, with respect to a certain objective, via a lower bound, and we empirically find it to be within 1\% of optimal at common vocabulary sizes.

Whether attention key value (KV) states computed for one prompt for a small LLM can be reused to accelerate inference on a new similar prompt, giving an increase to the space to its context memory using an approach called token recycling. Using a standard Hugging Face setup with DialoGPT-medium (a 345M parameter GPT-2 style decoder trained on 147M Reddit exchanges, 2005 to 2017) as the testbed, we build a cache of past activations and get entries by sentence embeddings, then reuse cached past key values when the cached prompt is an exact prefix of the new input. We compare recycled vs. baseline runs on latency and output fidelity, and log reuse depth in tokens. Reproducibility requires no model modifications, cached KVs are serialized to the CPU, reloaded, and supplied to the generate function to continue decoding from the cached prefix. In tests, we observe consistent speedups when prefix overlap exists, with no material degradation in output semantics, and when overlap is absent, behavior matches baseline.

Quantization is essential for deploying Large Language Models (LLMs) by enhancing memory efficiency and inference speed. Existing methods for activation quantization mainly address channel-wise outliers, often neglecting token-wise outliers, leading to reliance on costly per-token dynamic quantization. To address this, we introduce PrefixQuant, a novel technique that isolates outlier tokens offline without re-training. Specifically, PrefixQuant identifies high-frequency outlier tokens and prefixes them in the KV cache, preventing the generation of outlier tokens during inference and simplifying quantization. To our knowledge, PrefixQuant is the first to enable efficient per-tensor static quantization to outperform expensive per-token dynamic quantization. For instance, in W4A4KV4 (4- bit weight, 4-bit activation, and 4-bit KV cache) Llama-3-8B, PrefixQuant with per-tensor static quantization achieves a 7.43 WikiText2 perplexity and 71.08% average accuracy on 5 common-sense reasoning tasks, outperforming previous per-token dynamic quantization methods like QuaRot with 0.98 perplexity improvement and +5.98 points accuracy. Additionally, the inference speed of W4A4 quantized models using PrefixQuant is 1.60x to 2.81x faster than FP16 models and exceeds QuaRot models by 1.2x to 1.3x. Our code is available at https://github.com/ChenMnZ/PrefixQuant.

Open-weight language models from different families exhibit complementary capabilities, motivating their consolidation into a compact student through on-policy distillation (OPD). However, full-vocabulary OPD typically assumes a shared tokenizer, while existing cross-tokenizer methods may discard teacher probability mass or assign it to student tokens with unrelated content. We introduce Byte-Prefix Marginalization (BPM), which re-expresses the teacher's next-token distribution over the student vocabulary in a shared byte space. Specifically, BPM assigns each teacher token's probability to the longest student token whose byte representation is a prefix of the teacher token's bytes, aggregates mass mapped to the same student token, and places otherwise unmatched mass in an explicit residual category. This produces a vocabulary-complete, byte-aligned, and mass-preserving target for dense OPD. The target exactly recovers the teacher-induced byte-prefix marginal when the relevant prefix does not span multiple teacher tokens (a condition satisfied at more than 99% of training positions) and uses a mass-preserving, chain-factorized lower bound otherwise. Across Qwen3-32B, GLM-Z1-9B-0414, and MiniMax-M2.7 as teachers, BPM consistently outperforms current cross-tokenizer methods on six mathematics and programming benchmarks, improving six-benchmark avg@8 by 3.7-6.6 points over the strongest baselines.

Tokenization plays a pivotal role in natural language processing (NLP), shaping how text is segmented and interpreted by language models. While subword methods such as Byte Pair Encoding (BPE) and WordPiece have been effective, they often struggle with morphologically rich and agglutinative languages because they rely on frequency rather than linguistic structure. We introduce a hybrid tokenization framework that combines rule-based morphological analysis with statistical subword segmentation. The method uses phonological normalization, root-affix dictionaries, and a novel algorithm that balances morpheme preservation with vocabulary efficiency. It assigns shared identifiers to phonologically variant affixes (e.g., -ler and -lar) and altered root forms (e.g., kitap vs. kitab{\i}), reducing redundancy while maintaining semantic integrity. Special tokens are added for whitespace and case, including an UPPERCASE marker to avoid vocabulary inflation from capitalization. BPE is integrated for out-of-vocabulary coverage without harming morphological coherence. On the TR-MMLU benchmark, the tokenizer achieves the highest Turkish Token Percentage (90.29\%) and Pure Token Percentage (85.8\%). Comparisons with tokenizers from LLaMA, Gemma, and GPT show more linguistically meaningful and coherent tokens. Although demonstrated on Turkish, the approach is language-independent and adaptable to other languages, offering a practical path toward more interpretable and effective multilingual NLP systems.

Commercial large language models bill, scale latency, and budget context per token. Yet tokenizers assign more subword tokens to the same meaning in some languages than in others, so speakers of languages with high token-fertility pay a structural penalty before a model is ever invoked. This penalty is documented for multilingual settings in general, but it has not been measured systematically for African languages at the level of enterprise deployment economics and cognitive context capacity. We measure it across 20 African languages spanning five language families and three scripts (Latin, Ge'ez/Ethiopic, N'Ko; 19 appear in the primary FLORES-200+ corpus, with Nigerian Pidgin measured via MAFAND-MT only), using parallel corpora so that the language effect is isolated from content. Across 11 frontier and open tokenizers on FLORES-200+, every African language carries a tokenization premium above English (median 1.88x on GPT-5 / o200k_base, up to 8.92x for N'Ko); the penalty is largest for Ethiopic and N'Ko scripts (reaching 7-9x) and is near-invariant across corpora (FLORES vs SIB-200 Pearson r = 0.9998). Translated into deployment terms, this results in up to 8.9x inference cost and an equivalent generation-latency multiplier (N'Ko vs English on GPT-5; 7.4x for Amharic), and as little as 11% of English's effective context window. The best currently available tokenizer for African languages, Gemma 4, reduces the mean premium from 3.31x (cl100k_base) to 2.38x, but no tokenizer eliminates the penalty. We release an open measurement tool (afri-fertility), a public leaderboard, a results dataset, and mitigation guidance for African builders. The penalty falls hardest on the languages whose speakers can least afford it, a digital divide encoded directly into the subword vocabulary.

Language models of code (LMs) work well when the surrounding code in the vicinity of generation provides sufficient context. This is not true when it becomes necessary to use types or functionality defined in another module or library, especially those not seen during training. LMs suffer from limited awareness of such global context and end up hallucinating, e.g., using types defined in other files incorrectly. Recent work tries to overcome this issue by retrieving global information to augment the local context. However, this bloats the prompt or requires architecture modifications and additional training. Integrated development environments (IDEs) assist developers by bringing the global context at their fingertips using static analysis. We extend this assistance, enjoyed by developers, to the LMs. We propose a notion of monitors that use static analysis in the background to guide the decoding. Unlike a priori retrieval, static analysis is invoked iteratively during the entire decoding process, providing the most relevant suggestions on demand. We demonstrate the usefulness of our proposal by monitoring for type-consistent use of identifiers whenever an LM generates code for object dereference. To evaluate our approach, we curate PragmaticCode, a dataset of open-source projects with their development environments. On models of varying parameter scale, we show that monitor-guided decoding consistently improves the ability of an LM to not only generate identifiers that match the ground truth but also improves compilation rates and agreement with ground truth. We find that LMs with fewer parameters, when guided with our monitor, can outperform larger LMs. With monitor-guided decoding, SantaCoder-1.1B achieves better compilation rate and next-identifier match than the much larger text-davinci-003 model. The datasets and code will be released at https://aka.ms/monitors4codegen .

In infilling tasks, sub-tokens, representing instances where a complete token is segmented into two parts, often emerge at the boundaries of prefixes, middles, and suffixes. Traditional methods focused on training models at the token level, leading to sub-optimal performance in character-level infilling tasks during the inference stage. Alternately, some approaches considered character-level infilling, but they relied on predicting sub-tokens in inference, yet this strategy diminished ability in character-level infilling tasks due to the large perplexity of the model on sub-tokens. In this paper, we introduce FIM-SE, which stands for Fill-In-the-Middle with both Starting and Ending character constraints. The proposed method addresses character-level infilling tasks by utilizing a line-level format to avoid predicting any sub-token in inference. In addition, we incorporate two special tokens to signify the rest of the incomplete lines, thereby enhancing generation guidance. Extensive experiments demonstrate that our proposed approach surpasses previous methods, offering a significant advantage. Code is available at https://github.com/SenseLLM/FIM-SE.

Complishon is Pharo's context-aware code completion engine, built on AST analysis, lazy candidate generation, and filter-based candidate selection. Its existing design already provides strong semantic completion, but several practical limits remain. Strict prefix matching is sensitive to small typing errors, framework prefixes often force redundant input, large completion menus are difficult to scan, and prefix-only matching does not support common camel-case abbreviations. This paper presents four extensions that address these limits: typo tolerance, implicit prefix expansion, grouped completion entries, and camel-case matching. For each extension, we describe the implementation, discuss alternative designs, and explain the trade-offs involved. The main contribution of the paper is to show that these improvements can be integrated into Complishon while preserving its modular architecture and predictable behavior.

Semantic-ID (SID) tokenizers are increasingly reused as standalone artifacts in generative recommendation: an exported item-to-code mapping becomes the address space that a later sequence generator must use. These mappings rarely come with a common inspection interface, so coverage gaps, full-code aliasing, behaviorally weak prefixes, tail compression, and prefix fan-out are often found only after downstream training. We present SIDInspector, a mapping-first diagnostic resource for SID tokenizer artifacts. SIDInspector defines a small adapter contract over item mappings, metadata, interactions, and optional generator traces; validates the contract; and reports mapping-level probes for utilization, aliasing, neighborhood alignment, popularity allocation, and structural cost, with hooks for temporal churn and generator traces. SIDInspector characterizes exported mappings independently of downstream leaderboard scores. The release covers four tokenizer lines: GRID-style RQ-KMeans under two capacity settings and a bounded ReSID/GAOQ export in a same-item Musical protocol, plus released LETTER and LC-Rec item-index artifacts. In that protocol, D2 aliasing falls from 0.977 to 0.779 under added GRID-style capacity and to 0.000 for ReSID/GAOQ, while D3 remains below a deterministic category-prefix control (0.055-0.154 versus 0.447). SIDInspector exposes capacity, addressability, and behavioral prefix alignment as distinct artifact properties before method-level evaluation. Additional domain checks show the same diagnostic distinction. Bounded fixed-reranker probes connect prefix alignment to candidate exposure, while final ranking quality remains a downstream model question.

Typically, tokenization is the very first step in most text processing works. As a token serves as an atomic unit that embeds the contextual information of text, how to define a token plays a decisive role in the performance of a model.Even though Byte Pair Encoding (BPE) has been considered the de facto standard tokenization method due to its simplicity and universality, it still remains unclear whether BPE works best across all languages and tasks. In this paper, we test several tokenization strategies in order to answer our primary research question, that is, "What is the best tokenization strategy for Korean NLP tasks?" Experimental results demonstrate that a hybrid approach of morphological segmentation followed by BPE works best in Korean to/from English machine translation and natural language understanding tasks such as KorNLI, KorSTS, NSMC, and PAWS-X. As an exception, for KorQuAD, the Korean extension of SQuAD, BPE segmentation turns out to be the most effective.

Group Relative Policy Optimization (GRPO) enhances policy learning by computing gradients from relative comparisons among candidate outputs that share a common input prefix. Despite its effectiveness, GRPO introduces substantial computational overhead when processing long shared prefixes, which must be redundantly encoded for each group member. This inefficiency becomes a major scalability bottleneck in long-context learning scenarios. We propose Prefix Grouper, an efficient GRPO training algorithm that eliminates redundant prefix computation via a Shared-Prefix Forward strategy. In particular, by restructuring self-attention into two parts, our method enables the shared prefix to be encoded only once, while preserving full differentiability and compatibility with end-to-end training. We provide both theoretical and empirical evidence that Prefix Grouper is training-equivalent to standard GRPO: it yields identical forward outputs and backward gradients, ensuring that the optimization dynamics and final policy performance remain unchanged. Empirically, our experiments confirm that Prefix Grouper achieves consistent results while significantly reducing the computational cost of training, particularly in long-prefix scenarios. The proposed method is fully plug-and-play: it is compatible with existing GRPO-based architectures and can be seamlessly integrated into current training pipelines as a drop-in replacement, requiring no structural modifications and only minimal changes to input construction and attention computation. Prefix Grouper enables the use of larger group sizes under the same computational budget, thereby improving the scalability of GRPO to more complex tasks and larger models. Code is now available at https://github.com/johncaged/PrefixGrouper

Byte-level BPE tokenizers that use the HuggingFace ByteLevel pre-tokenizer inherit GPT-2's word regex, where a word is defined as L+, one or more Unicode letters. In abugida scripts, vowels are written as combining marks; this pattern therefore splits each word at every vowel sign. Since BPE merges only within a pre-token, those splits persist through training regardless of vocabulary size or corpus composition. We formalise this effect as a training-free lower bound on fertility. Across 26 languages from a parallel corpus, every one of the 17 abugidas is affected, ranging from 1.47x (Tibetan) to 9.02x (Thai), whereas Latin, Cyrillic, Hangul, and Han show exactly 1.00x. For 5 languages, matched tokenizer pairs that differ only in this character class fall within 2.2% of the predicted floor, scoring 4.78 versus 1.58 tokens per word on Nepali. When the Nepali share of the training corpus is swept from 5% to 95%, the broken tokenizer barely shifts at all (1.7%) while the fixed one shifts 33.9%, which separates a structural ceiling from a data shortage without needing to inspect any code. We train three 268M models that differ only in their tokenizer; the fixed variant achieves 4.43% lower held-out Nepali bits per byte at equal compute, and it still leads when given the same bytes with 1.59x the compute. A census of 3,479 HuggingFace repositories finds the letters-only word class present in 63.3% of the most-downloaded text-generation models, accounting for 72.5% of their downloads. GPT-4o's o200k pattern already uses a mark-aware word class, making the repair itself prior art. We quantify its value, show how to recognise its absence from symptoms alone, map which scripts it reaches, measure how widely it is deployed, and release a 65,536-entry Nepali-English tokenizer with a harness that regenerates every number here from public data on a laptop.

Visual tokenizers play a central role in latent image generation by bridging high-dimensional images and tractable generative modeling. However, most existing tokenizers are still trained with reconstruction-dominated objectives, which often yield latent representations that are only weakly grounded in high-level semantics. Recent approaches improve semantic alignment, but typically treat semantic signals as auxiliary regularization rather than making them functionally necessary for representation learning. We propose SMAP, a SeMantic-Aware Prefix tokenizer that injects class-level semantic conditions into a query-based 1D tokenization framework. To make semantics indispensable during training, SMAP introduces a tail token dropping strategy, which forces semantic conditions and early latent prefixes to bear increasing responsibility under progressively reduced token budgets. To verify that the resulting latent space is useful for generation rather than reconstruction alone, we further introduce CARD, a hybrid Causal AutoRegressive--Diffusion generator. Extensive experiments on ImageNet show that SMAP consistently improves reconstruction quality across discrete and continuous tokenization settings, and that its semantically grounded latent space yields strong downstream generation performance under compact token budgets.

Tokenizers play a crucial role in determining the performance, training efficiency, and the inference cost of Large Language Models (LLMs). Designing effective tokenizers for multilingual LLMs is particularly challenging due to diverse scripts and rich morphological variation. While subword methods like Byte Pair Encoding (BPE) are widely adopted, their effectiveness in multilingual settings remains underexplored. We present MUTANT, a recipe for building multilingual tokenizers, with careful vocabulary and training data design, language-aware pre-tokenization, and subword and multiword aware training. We also introduce MUTANT-Indic, a tokenizer for India-specific multilingual LLMs, that produces linguistically coherent tokens and achieves state-of-the-art performance. Evaluated across English, 22 Indian languages and code data, our tokenizer improves the average fertility score by 39.5%$ over LLaMA4 and by 18% over Sutra (the current best). This translates to 44% improvement in inference throughput over LLaMA4 while maintaining comparable performance on English and Indic benchmarks. We present detailed ablations across tokenizer training data size, vocabulary size, merging techniques, and pre-tokenization strategies, demonstrating the robustness of our design choices.

Tokenization is an understudied and often neglected component of modern LLMs. Most published works use a single tokenizer for all experiments, often borrowed from another model, without performing ablations or analysis to optimize tokenization. Moreover, the tokenizer is generally kept unchanged when fine-tuning a base model. In this paper, we show that the size, pre-tokenization regular expression, and training data of a tokenizer can significantly impact the model's generation speed, effective context size, memory usage, and downstream performance. We train specialized Byte-Pair Encoding code tokenizers, and conduct extensive ablations on the impact of tokenizer design on the performance of LLMs for code generation tasks such as HumanEval and MBPP, and provide recommendations for tokenizer hyper-parameters selection and switching the tokenizer in a pre-trained LLM. We perform our experiments on models trained from scratch and from pre-trained models, verifying their applicability to a wide range of use-cases. We find that when fine-tuning on more than 50 billion tokens, we can specialize the tokenizer of a pre-trained LLM to obtain large gains in generation speed and effective context size.

Pretrained language models (LLMs) are often constrained by their fixed tokenization schemes, leading to inefficiencies and performance limitations, particularly for multilingual or specialized applications. This tokenizer lock-in presents significant challenges. standard methods to overcome this often require prohibitive computational resources. Although tokenizer replacement with heuristic initialization aims to reduce this burden, existing methods often require exhaustive residual fine-tuning and still may not fully preserve semantic nuances or adequately address the underlying compression inefficiencies. Our framework introduces two innovations: first, Tokenadapt, a model-agnostic tokenizer transplantation method, and second, novel pre-tokenization learning for multi-word Supertokens to enhance compression and reduce fragmentation. Tokenadapt initializes new unique token embeddings via a hybrid heuristic that combines two methods: a local estimate based on subword decomposition using the old tokenizer, and a global estimate utilizing the top-k semantically similar tokens from the original vocabulary. This methodology aims to preserve semantics while significantly minimizing retraining requirements. Empirical investigations validate both contributions: the transplantation heuristic successfully initializes unique tokens, markedly outperforming conventional baselines and sophisticated methods including Transtokenizer and ReTok, while our Supertokens achieve notable compression gains. Our zero-shot perplexity results demonstrate that the TokenAdapt hybrid initialization consistently yields lower perplexity ratios compared to both ReTok and TransTokenizer baselines across different base models and newly trained target tokenizers. TokenAdapt typically reduced the overall perplexity ratio significantly compared to ReTok, yielding at least a 2-fold improvement in these aggregate scores.

Large Language Models (LLMs) achieve impressive reasoning capabilities at the cost of substantial inference overhead, posing substantial deployment challenges. Although distilled Small Language Models (SLMs) significantly enhance efficiency, their performance suffers as they fail to follow LLMs' reasoning paths. Luckily, we reveal that only a small fraction of tokens genuinely diverge reasoning paths between LLMs and SLMs. Most generated tokens are either identical or exhibit neutral differences, such as minor variations in abbreviations or expressions. Leveraging this insight, we introduce **Roads to Rome (R2R)**, a neural token routing method that selectively utilizes LLMs only for these critical, path-divergent tokens, while leaving the majority of token generation to the SLM. We also develop an automatic data generation pipeline that identifies divergent tokens and generates token-level routing labels to train the lightweight router. We apply R2R to combine R1-1.5B and R1-32B models from the DeepSeek family, and evaluate on challenging math, coding, and QA benchmarks. With an average activated parameter size of 5.6B, R2R surpasses the average accuracy of R1-7B by 1.6x, outperforming even the R1-14B model. Compared to R1-32B, it delivers a 2.8x wall-clock speedup with comparable performance, advancing the Pareto frontier of test-time scaling efficiency. Our code is available at https://github.com/thu-nics/R2R.

Long-horizon LLM agents accumulate tool results, files, plans, and user constraints that are too structured to be treated as a disposable text suffix. Current systems mostly rely on in-run heuristics such as chronological pruning and tool-output masking, or on final self-summary near a context limit. Heuristics are cheap but blind to future dependencies; summaries preserve narrative state but often hide exact evidence, locators, and editable artifacts. We present Self-GC, where GC denotes self-governing context while deliberately echoing garbage collection: the system does not merely reclaim unused tokens, but governs the lifecycle of agent context objects. Self-GC turns user turns, tool spans, and skill state into indexed objects; asks a side-channel planner to propose fold, mask, and prune actions; and lets the harness enforce recoverable sidecars, safe commit boundaries, and cache-aware commit. On a 33-session Hard Set, Self-GC prunes 43.95% of prefix tokens while leaving 84.85% of future continuations unaffected, compared with no-impact rates of 54.55% to 69.70% for heuristic baselines. On a 332-session production-derived suite, three planner backbones reach no-impact rates of 91.27% to 94.58%, while baselines remain at 77.71% to 87.46%. In production, an online account-level split reduces daytime average input tokens by 10% to 15%, with peak reductions near 20%. These results point to context management as runtime lifecycle control over indexed, recoverable objects rather than post hoc text cleanup.

The Non-Local Network (NLNet) presents a pioneering approach for capturing long-range dependencies, via aggregating query-specific global context to each query position. However, through a rigorous empirical analysis, we have found that the global contexts modeled by non-local network are almost the same for different query positions within an image. In this paper, we take advantage of this finding to create a simplified network based on a query-independent formulation, which maintains the accuracy of NLNet but with significantly less computation. We further observe that this simplified design shares similar structure with Squeeze-Excitation Network (SENet). Hence we unify them into a three-step general framework for global context modeling. Within the general framework, we design a better instantiation, called the global context (GC) block, which is lightweight and can effectively model the global context. The lightweight property allows us to apply it for multiple layers in a backbone network to construct a global context network (GCNet), which generally outperforms both simplified NLNet and SENet on major benchmarks for various recognition tasks. The code and configurations are released at https://github.com/xvjiarui/GCNet.

Diffusion Language Models (DLMs) offer order-agnostic generation that can explore many possible decoding trajectories. However, current decoding methods commit to a single trajectory, limiting exploration in trajectory space. We introduce Order-Token Search to explore this space through jointly searching over generation order and token values. Its core is a likelihood estimator that scores denoising actions, enabling stable pruning and efficient exploration of diverse trajectories. Across mathematical reasoning and coding benchmarks, Order-Token Search consistently outperforms baselines on GSM8K, MATH500, Countdown, and HumanEval (3.1%, 3.8%, 7.9%, and 6.8% absolute over backbone), matching or surpassing diffu-GRPO post-trained d1-LLaDA. Our work establishes joint search as a key component for advancing decoding in DLMs.

Vision-Language Models (VLMs) encode images into lengthy sequences of visual tokens, leading to excessive computational overhead and limited inference efficiency. While prior efforts prune or merge tokens to address this issue, they often rely on special tokens (e.g., CLS) or require task-specific training, hindering scalability across architectures. In this paper, we propose HiPrune, a training-free and model-agnostic token Pruning framework that exploits the Hierarchical attention structure within vision encoders. We identify that middle layers attend to object-centric regions, while deep layers capture global contextual features. Based on this observation, HiPrune selects three types of informative tokens: (1) Anchor tokens with high attention in object-centric layers, (2) Buffer tokens adjacent to anchors for spatial continuity, and (3) Register tokens with strong attention in deep layers for global summarization. Our method requires no retraining and integrates seamlessly with any ViT-based VLM. Extensive experiments on LLaVA-1.5, LLaVA-NeXT, and Qwen2.5-VL demonstrate that HiPrune achieves state-of-the-art pruning performance, preserving up to 99.3% task accuracy with only 33.3% tokens, and maintaining 99.5% accuracy with just 11.1% tokens. Meanwhile, it reduces inference FLOPs and latency by up to 9times, showcasing strong generalization across models and tasks. Code is available at https://github.com/Danielement321/HiPrune.

The class of tree-adjoining languages can be characterized by various two-level formalisms, consisting of a context-free grammar (CFG) or pushdown automaton (PDA) controlling another CFG or PDA. These four formalisms are equivalent to tree-adjoining grammars (TAG), linear indexed grammars (LIG), pushdown-adjoining automata (PAA), and embedded pushdown automata (EPDA). We define semiring-weighted versions of the above two-level formalisms, and we design new algorithms for computing their stringsums (the weight of all derivations of a string) and allsums (the weight of all derivations). From these, we also immediately obtain stringsum and allsum algorithms for TAG, LIG, PAA, and EPDA. For LIG, our algorithm is more time-efficient by a factor of O(n|N|) (where n is the string length and |N| is the size of the nonterminal set) and more space-efficient by a factor of O(|Gamma|) (where |Gamma| is the size of the stack alphabet) than the algorithm of Vijay-Shanker and Weir (1989). For EPDA, our algorithm is both more space-efficient and time-efficient than the algorithm of Alonso et al. (2001) by factors of O(|Gamma|^2) and O(|Gamma|^3), respectively. Finally, we give the first PAA stringsum and allsum algorithms.

Global sentence information is crucial for sequence labeling tasks, where each word in a sentence must be assigned a label. While BiLSTM models are widely used, they often fail to capture sufficient global context for inner words. Previous work has proposed various RNN variants to integrate global sentence information into word representations. However, these approaches suffer from three key limitations: (1) they are slower in both inference and training compared to the original BiLSTM, (2) they cannot effectively supplement global information for transformer-based models, and (3) the high time cost associated with reimplementing and integrating these customized RNNs into existing architectures. In this study, we introduce a simple yet effective mechanism that addresses these limitations. Our approach efficiently supplements global sentence information for both BiLSTM and transformer-based models, with minimal degradation in inference and training speed, and is easily pluggable into current architectures. We demonstrate significant improvements in F1 scores across seven popular benchmarks, including Named Entity Recognition (NER) tasks such as Conll2003, Wnut2017 , and the Chinese named-entity recognition task Weibo, as well as End-to-End Aspect-Based Sentiment Analysis (E2E-ABSA) benchmarks such as Laptop14, Restaurant14, Restaurant15, and Restaurant16. With out any extra strategy, we achieve third highest score on weibo NER benchmark. Compared to CRF, one of the most popular frameworks for sequence labeling, our mechanism achieves competitive F1 scores while offering superior inference and training speed. Code is available at: https://github.com/conglei2XU/Global-Context-Mechanism

We study suffix-based jailbreaksx2013a powerful family of attacks against large language models (LLMs) that optimize adversarial suffixes to circumvent safety alignment. Focusing on the widely used foundational GCG attack (Zou et al., 2023), we observe that suffixes vary in efficacy: some markedly more universalx2013generalizing to many unseen harmful instructionsx2013than others. We first show that GCG's effectiveness is driven by a shallow, critical mechanism, built on the information flow from the adversarial suffix to the final chat template tokens before generation. Quantifying the dominance of this mechanism during generation, we find GCG irregularly and aggressively hijacks the contextualization process. Crucially, we tie hijacking to the universality phenomenon, with more universal suffixes being stronger hijackers. Subsequently, we show that these insights have practical implications: GCG universality can be efficiently enhanced (up to times5 in some cases) at no additional computational cost, and can also be surgically mitigated, at least halving attack success with minimal utility loss. We release our code and data at http://github.com/matanbt/interp-jailbreak.

Recent achievements of vision-language models in end-to-end OCR point to a new avenue for low-loss compression of textual information. This motivates earlier works that render the Transformer's input into images for prefilling, which effectively reduces the number of tokens through visual encoding, thereby alleviating the quadratically increased Attention computations. However, this partial compression fails to save computational or memory costs at token-by-token inference. In this paper, we investigate global context compression, which saves tokens at both prefilling and inference stages. Consequently, we propose VIST2, a novel Transformer that interleaves input text chunks alongside their visual encoding, while depending exclusively on visual tokens in the pre-context to predict the next text token distribution. Around this idea, we render text chunks into sketch images and train VIST2 in multiple stages, starting from curriculum-scheduled pretraining for optical language modeling, followed by modal-interleaved instruction tuning. We conduct extensive experiments using VIST2 families scaled from 0.6B to 8B to explore the training recipe and hyperparameters. With a 4times compression ratio, the resulting models demonstrate significant superiority over baselines on long writing tasks, achieving, on average, a 3times speedup in first-token generation, 77% reduction in memory usage, and 74% reduction in FLOPS. Our codes and datasets will be public to support further studies.

Current Large Language Models (LLMs) mostly use BPE (Byte Pair Encoding) based tokenizers, which are very effective for simple structured Latin scripts such as English. However, standard BPE tokenizers struggle to process complex Abugida scripts due to their structural complexity. The problem is that these tokenizers break complex conjuncts, which are multi-codepoint grapheme clusters, into meaningless sub-character units. This degrades the LLM's reasoning efficiency by forcing it to learn basic orthographic structures at inference time and raises inference costs, resulting in a significant "Token Tax" for the Global South. We propose a new three-layer architecture, the WWHO (Where-What-How Often), and an algorithm named SGPE (Syllable-aware Grapheme Pair Encoding) that separates the linguistic rules of the script from the statistical compression process while enabling seamless multilingual tokenization. Using Sinhala and Devanagari (Hindi/Sanskrit) as highly complex Abugida scripts, we trained WWHO on a cleaned 30-million-sentence dataset and evaluated on a 1,499,950-sentence test set. For Sinhala, SGPE achieves a Token to Word Ratio (TWR) of 1.274 with 4.83 characters per token, representing a 61.7 percent reduction in tokens compared to OpenAI's o200k base. For Hindi, it achieves a TWR of 1.181 (27.0 percent reduction vs o200k). On the mixed-script (Sinhala, Devanagari, and English) dataset, SGPE achieves an overall TWR of 1.240, representing token reductions of 36.7 percent, 39.6 percent, and 60.2 percent relative to o200k base, Llama 4 Scout, and DeepSeek V3, respectively. This effectively extends the usable context window by up to 4.38 times for these Abugida languages while ensuring a Linguistic Zero-Breakage Guarantee, which ensures that no valid syllable is ever split across multiple tokens.

Named entity recognition (NER) task aims at identifying entities from a piece of text that belong to predefined semantic types such as person, location, organization, etc. The state-of-the-art solutions for flat entities NER commonly suffer from capturing the fine-grained semantic information in underlying texts. The existing span-based approaches overcome this limitation, but the computation time is still a concern. In this work, we propose a novel span-based NER framework, namely Global Pointer (GP), that leverages the relative positions through a multiplicative attention mechanism. The ultimate goal is to enable a global view that considers the beginning and the end positions to predict the entity. To this end, we design two modules to identify the head and the tail of a given entity to enable the inconsistency between the training and inference processes. Moreover, we introduce a novel classification loss function to address the imbalance label problem. In terms of parameters, we introduce a simple but effective approximate method to reduce the training parameters. We extensively evaluate GP on various benchmark datasets. Our extensive experiments demonstrate that GP can outperform the existing solution. Moreover, the experimental results show the efficacy of the introduced loss function compared to softmax and entropy alternatives.

Frontier LLMs are increasingly utilised across academia, society and industry. A commonly used unit for comparing models, their inputs and outputs, and estimating inference pricing is the token. In general, tokens are used as a stable currency, assumed to be broadly consistent across tokenizers and contexts, enabling direct comparisons. However, tokenization varies significantly across models and domains of text, making naive interpretation of token counts problematic. We quantify this variation by providing a comprehensive empirical analysis of tokenization, exploring the compression of sequences to tokens across different distributions of textual data. Our analysis challenges commonly held heuristics about token lengths, finding them to be overly simplistic. We hope the insights of our study add clarity and intuition toward tokenization in contemporary LLMs.

Existing state-of-the-art image tokenization methods leverage diverse semantic features from pre-trained vision models for additional supervision, to expand the distribution of latent representations and thereby improve the quality of image reconstruction and generation. These methods employ a locally supervised approach for semantic supervision, which limits the uniformity of semantic distribution. However, VA-VAE proves that a more uniform feature distribution yields better generation performance. In this work, we introduce a Global Perspective Tokenizer (GloTok), which utilizes global relational information to model a more uniform semantic distribution of tokenized features. Specifically, a codebook-wise histogram relation learning method is proposed to transfer the semantics, which are modeled by pre-trained models on the entire dataset, to the semantic codebook. Then, we design a residual learning module that recovers the fine-grained details to minimize the reconstruction error caused by quantization. Through the above design, GloTok delivers more uniformly distributed semantic latent representations, which facilitates the training of autoregressive (AR) models for generating high-quality images without requiring direct access to pre-trained models during the training process. Experiments on the standard ImageNet-1k benchmark clearly show that our proposed method achieves state-of-the-art reconstruction performance and generation quality.

Recent alignment studies commonly remove introductory boilerplate phrases from supervised fine-tuning (SFT) datasets. This work challenges that assumption. We hypothesize that safety- and reasoning-oriented prefix sentences serve as lightweight alignment signals that can guide model decoding toward safer and more coherent responses. To examine this, we fine-tune three R1 series models across three core model capabilities: reasoning (mathematics, coding), safety, and factuality, systematically varying prefix inclusion from 0% to 100%. Results show that prefix-conditioned SFT improves both safety and reasoning performance, yielding up to +6% higher Safe@1 accuracy on adversarial benchmarks (WildJailbreak, StrongReject) and +7% improvement on GSM8K reasoning. However, factuality and coding tasks show marginal or negative effects, indicating that prefix-induced narrowing of the search space benefits structured reasoning. Token-level loss analysis further reveals that prefix tokens such as "revised" and "logically" incur higher gradient magnitudes, acting as alignment anchors that stabilize reasoning trajectories. Our findings suggest that prefix conditioning offers a scalable and interpretable mechanism for improving reasoning safety, serving as an implicit form of alignment that complements traditional reward-based methods.

We present the KL3M tokenizers, a family of specialized tokenizers for legal, financial, and governmental text. Despite established work on tokenization, specialized tokenizers for professional domains remain understudied. Our paper offers two main contributions to this area. First, we introduce domain-specific BPE tokenizers for legal, financial, and governmental text. Our kl3m-004-128k-cased tokenizer uses 9-17% fewer tokens than GPT-4o and Llama3 for domain-specific documents, despite having a smaller vocabulary. For specialized terminology, our cased tokenizer is even more efficient, using up to 83% fewer tokens for legal terms and 39% fewer tokens for financial terms. Second, we develop character-level BPE tokenizers (4K, 8K, and 16K vocabulary sizes) for text correction tasks like OCR post-processing. These tokenizers keep consistent token boundaries between error-containing and correct text, making it easier for models to learn correction patterns. These tokenizers help professional applications by fitting more text in context windows, reducing computational needs, and preserving the meaning of domain-specific terms. Our analysis shows these efficiency gains directly benefit the processing of long legal and financial documents. We release all tokenizers and code through GitHub and Hugging Face to support further research in specialized tokenization.

Semantic-ID mappings are reusable interfaces between item tokenizers and generative recommenders, yet released mappings rarely state whether they are coherent, what structure they expose, how generated paths resolve, or what must be revalidated after a refresh. SIDScope is a source-traced diagnostic resource for these decisions. It normalizes item-to-code artifacts, verifies provenance and joins, profiles mapping structure, compares paired revisions, and accounts for path-to-item outcomes in generated traces. Across nine source-traced tokenizer exports from seven families on Amazon and Yelp data - eight executable routes plus one auditable snapshot - SIDScope reveals that interface health is multi-signal rather than scalar. Its central finding is mechanism-conditional: prefix alignment strongly tracks held-out candidate exposure when retrieval consumes SID prefixes, then weakens as scoring becomes prefix-independent. Trained trace accounting exposes a second hidden gap: a valid target path can survive without uniquely retrieving the target item by 1.2-3.0 percentage points. A refresh case establishes a third: repairing the mapping does not by itself restore an inherited generator; model reuse requires a separate handoff check. The package provides frozen evidence summaries, conformance reports, trace labels, table builders, and CPU-only verifiers. It supports decisions about artifact readiness, interface risks, and revalidation before model reuse.

In this paper, we introduce a new task for code completion that focuses on handling long code input and propose a sparse Transformer model, called LongCoder, to address this task. LongCoder employs a sliding window mechanism for self-attention and introduces two types of globally accessible tokens - bridge tokens and memory tokens - to improve performance and efficiency. Bridge tokens are inserted throughout the input sequence to aggregate local information and facilitate global interaction, while memory tokens are included to highlight important statements that may be invoked later and need to be memorized, such as package imports and definitions of classes, functions, or structures. We conduct experiments on a newly constructed dataset that contains longer code context and the publicly available CodeXGLUE benchmark. Experimental results demonstrate that LongCoder achieves superior performance on code completion tasks compared to previous models while maintaining comparable efficiency in terms of computational resources during inference. All the codes and data are available at https://github.com/microsoft/CodeBERT.

Large language models have made substantial progress in addressing diverse code-related tasks. However, their adoption is hindered by inconsistencies in generating output due to the lack of real-world, domain-specific information, such as for intra-repository API calls for unseen software projects. We introduce a novel technique to mitigate hallucinations by leveraging global and local contextual information within a code repository for API completion tasks. Our approach is tailored to refine code completion tasks, with a focus on optimizing local API completions. We examine relevant import statements during API completion to derive insights into local APIs, drawing from their method signatures. For API token completion, we analyze the inline variables and correlate them with the appropriate imported modules, thereby allowing our approach to rank the most contextually relevant suggestions from the available local APIs. Further, for conversational API completion, we gather APIs that are most relevant to the developer query with a retrieval-based search across the project. We employ our tool, LANCE, within the framework of our proposed benchmark, APIEval, encompassing two different programming languages. Our evaluation yields an average accuracy of 82.6% for API token completion and 76.9% for conversational API completion tasks. On average, LANCE surpasses Copilot by 143% and 142% for API token completion and conversational API completion, respectively. The implications of our findings are substantial for developers, suggesting that our lightweight context analysis can be applied to multilingual environments without language-specific training or fine-tuning, allowing for efficient implementation with minimal examples and effort.

Byte Pair Encoding (BPE) tokenizers, widely used in Large Language Models, face challenges in multilingual settings, including penalization of non-Western scripts and the creation of tokens with partial UTF-8 sequences. Pretokenization, often reliant on complex regular expressions, can also introduce fragility and unexpected edge cases. We propose SCRIPT (Script Category Representation in PreTokenization), a novel encoding scheme that bypasses UTF-8 byte conversion by using initial tokens based on Unicode script and category properties. This approach enables a simple, rule-based pretokenization strategy that respects script boundaries, offering a robust alternative to pretokenization strategies based on regular expressions. We also introduce and validate a constrained BPE merging strategy that enforces character integrity, applicable to both SCRIPT-BPE and byte-based BPE. Our experiments demonstrate that SCRIPT-BPE achieves competitive compression while eliminating encoding-based penalties for non-Latin-script languages.

Token embeddings, a mapping from discrete lexical symbols to continuous vectors, are at the heart of any language model (LM). However, lexical symbol meanings can also be determined and even redefined by their structural role in a long context. In this paper, we ask: is it possible for a language model to be performant without any fixed token embeddings? Such a language model would have to rely entirely on the co-occurence and repetition of tokens in the context rather than the a priori identity of any token. To answer this, we study lexinvariantlanguage models that are invariant to lexical symbols and therefore do not need fixed token embeddings in practice. First, we prove that we can construct a lexinvariant LM to converge to the true language model at a uniform rate that is polynomial in terms of the context length, with a constant factor that is sublinear in the vocabulary size. Second, to build a lexinvariant LM, we simply encode tokens using random Gaussian vectors, such that each token maps to the same representation within each sequence but different representations across sequences. Empirically, we demonstrate that it can indeed attain perplexity comparable to that of a standard language model, given a sufficiently long context. We further explore two properties of the lexinvariant language models: First, given text generated from a substitution cipher of English, it implicitly implements Bayesian in-context deciphering and infers the mapping to the underlying real tokens with high accuracy. Second, it has on average 4X better accuracy over synthetic in-context reasoning tasks. Finally, we discuss regularizing standard language models towards lexinvariance and potential practical applications.

Tokenization is a fundamental component of language models for code. It involves breaking down the input into units that are later passed to the language model stack to learn high-dimensional representations used in various contexts, from classification to generation. However, the output of these tokenizers is often longer than that traditionally used in compilers and interpreters. This could result in undesirable effects, such as increased computational overhead. In this work, we investigate the effect of merging the hidden representations of subtokens that belong to the same semantic unit, such as subtokens that form a single identifier. We propose two strategies: one based on averaging the representations and another that leverages a learning-based approach. Both methods can be seamlessly integrated with existing language models for code. We conduct experiments using six language models for code: CodeBERT, GraphCodeBERT, UniXCoder, CdoeT5, CodeT5+ (220M), and CodeT5+ (770M), across three software engineering tasks: vulnerability detection, code classification, and code translation. Results show that these strategies can reduce the number of floating-point operations by 1% to 19%. Regarding downstream performance, the most significant degradation was observed in the vulnerability detection task, where the F1 score decreased by 1.82 points compared to the baseline. In contrast, for code translation, we observed an improvement of 2.47 points in CodeBLEU. This work contributes to the broader effort of improving language models for code across multiple dimensions, including both computational efficiency and downstream performance.

Prompting and contextual-based fine-tuning methods, which we call Prefix Learning, have been proposed to enhance the performance of language models on various downstream tasks that can match full parameter fine-tuning. There remains a limited theoretical understanding of how these methods work. In this paper, we aim to relieve this limitation by studying the learning ability of Prefix Learning from the perspective of prefix length. In particular, we approximate the infinite-long Prefix Learning optimization process by the Neural Tangent Kernel (NTK) technique. We formulate and solve it as a learning problem of the infinite-long prefix in a one-layer attention network. Our results confirm the over-parameterization property and arbitrary small loss convergence guarantee of the infinite-long Prefix Learning in attention. To the implementation end, we propose our NTK-Attention method, which is "equivalent" to attention computation with arbitrary prefix length efficiently. Its time complexity mainly depends on the sub-quadratic of input length (without prefix), and our method only requires d^2 + d extra parameters for representation, where d is the feature dimension. In addition, we conducted experiments that compare our NTK-Attention with full parameters fine-tuning, LoRA, and P-Tuning V2 methods across vision or natural language datasets. The results indicate our approach may be a promising parameter-efficient-fine-tuning method since it has demonstrated superior performance in numerous scenarios. Our code can be found at https://github.com/ChristianYang37/chiwun/tree/main/src/NTK-Attention.

Pharo offers a sophisticated completion engine based on semantic heuristics, which coordinates specific fetchers within a lazy architecture. These heuristics can be recomposed to support various activities (e.g., live programming or history usage navigation). While this system is powerful, it does not account for the repository structure when suggesting global names such as class names, class variables, or global variables. As a result, it does not prioritize classes within the same package or project, treating all global names equally. In this paper, we present a new heuristic that addresses this limitation. Our approach searches variable names in a structured manner: it begins with the package of the requesting class, then expands to other packages within the same repository, and finally considers the global namespace. We describe the logic behind this heuristic and evaluate it against the default semantic heuristic and one that directly queries the global namespace. Preliminary results indicate that the Mean Reciprocal Rank (MRR) improves, confirming that package-awareness completions deliver more accurate and relevant suggestions than the previous flat global approach.

While subword tokenizers such as BPE and WordPiece are typically used to build vocabularies for NLP models, the method of decoding text into a sequence of tokens from these vocabularies is often left unspecified, or ill-suited to the method in which they were constructed. We provide a controlled analysis of seven tokenizer inference methods across four different algorithms and three vocabulary sizes, performed on a novel intrinsic evaluation suite we curated for English, combining measures rooted in morphology, cognition, and information theory. We show that for the most commonly used tokenizers, greedy inference performs surprisingly well; and that SaGe, a recently-introduced contextually-informed tokenizer, outperforms all others on morphological alignment.

Subword tokenizers represent many common words twice in space-using writing systems, once with a leading space and once without. The two entries have separate embeddings in models, so occurrences of one word are divided across rows that are trained independently, and the two forms need not even segment the string the same way: " together" may be a single entry while the same word without a preceding space is tokenized as "to|gether". Capitalization divides a word further, into as many as six forms. We introduce an alternative to standard whitespace conventions using an explicit word boundary marker, which prevents such duplication. Words are delimited by the boundary markers, and spaces between words are represented as pairs of such markers. Two shift codes do the same for title case and upper case, allowing one internal representation of a word to be re-used across different settings. Switching to this convention mitigates the duplicate-entry issue, but does not improve tokenization compression: for both vocabulary-learning algorithms, the best marker scheme stays within one percent of the baseline in characters per token, averaged across six languages. It does result in better language modeling performance. Every marker scheme tested downstream reaches lower bits per byte than the baseline, suggesting that duplication carries a cost that compression does not capture.

This study introduces a novel knowledge enhanced tokenisation mechanism, K-Tokeniser, for clinical text processing. Technically, at initialisation stage, K-Tokeniser populates global representations of tokens based on semantic types of domain concepts (such as drugs or diseases) from either a domain ontology like Unified Medical Language System or the training data of the task related corpus. At training or inference stage, sentence level localised context will be utilised for choosing the optimal global token representation to realise the semantic-based tokenisation. To avoid pretraining using the new tokeniser, an embedding initialisation approach is proposed to generate representations for new tokens. Using three transformer-based language models, a comprehensive set of experiments are conducted on four real-world datasets for evaluating K-Tokeniser in a wide range of clinical text analytics tasks including clinical concept and relation extraction, automated clinical coding, clinical phenotype identification, and clinical research article classification. Overall, our models demonstrate consistent improvements over their counterparts in all tasks. In particular, substantial improvements are observed in the automated clinical coding task with 13\% increase on Micro F_1 score. Furthermore, K-Tokeniser also shows significant capacities in facilitating quicker converge of language models. Specifically, using K-Tokeniser, the language models would only require 50\% of the training data to achieve the best performance of the baseline tokeniser using all training data in the concept extraction task and less than 20\% of the data for the automated coding task. It is worth mentioning that all these improvements require no pre-training process, making the approach generalisable.

Parameter-Efficient Fine-Tuning (PEFT) methods have become crucial for rapidly adapting large language models (LLMs) to downstream tasks. Prefix-Tuning, an early and effective PEFT technique, demonstrated the ability to achieve performance comparable to full fine-tuning with significantly reduced computational and memory overhead. However, despite its earlier success, its effectiveness in training modern state-of-the-art LLMs has been very limited. In this work, we demonstrate empirically that prefix-tuning underperforms on LLMs because of an inherent tradeoff between the contribution of the input prompt and the parameterized prefix within the attention head. This motivates us to introduce PrefixMemory-Tuning, an architecture that generalizes the principles of prefix-tuning while addressing its shortcomings by shifting the prefix module out of the attention head itself and improving its expressiveness. Our experiments show that, across diverse benchmarks, PrefixMemory-Tuning consistently outperforms existing prefix-tuning methods. Notably, it achieves competitive performance with modern PEFTs on several general benchmarks, highlighting a potential extension of prefix-tuning approaches to become state-of-the-art. Our findings suggest that by overcoming its inherent limitations, prefix-tuning can remain a competitive and relevant research direction in the landscape of parameter-efficient LLM adaptation.

Tokenization is the first - and often underappreciated - layer of computation in language models. While Chain-of-Thought (CoT) prompting enables transformer models to approximate recurrent computation by externalizing intermediate steps, we show that the success of such reasoning is fundamentally bounded by the structure of tokenized inputs. This work presents a theoretical and empirical investigation into how tokenization schemes, particularly subword-based methods like byte-pair encoding (BPE), impede symbolic computation by merging or obscuring atomic reasoning units. We introduce the notion of Token Awareness to formalize how poor token granularity disrupts logical alignment and prevents models from generalizing symbolic procedures. Through systematic evaluation on arithmetic and symbolic tasks, we demonstrate that token structure dramatically affect reasoning performance, causing failure even with CoT, while atomically-aligned formats unlock strong generalization, allowing small models (e.g., GPT-4o-mini) to outperform larger systems (e.g., o1) in structured reasoning. Our findings reveal that symbolic reasoning ability in LLMs is not purely architectural, but deeply conditioned on token-level representations.

Large language model (LLM) tokenizers act as structured compressors: by mapping text to discrete token sequences, they determine token count (and thus compute and context usage) and the statistical structure seen by downstream models. Despite their central role in LLM pipelines, the link between tokenization, compression efficiency and induced structure is not well understood. We empirically demonstrate that tokenizer training scale redistributes entropy: as training data grows, the token stream becomes more diverse in aggregate (higher unigram entropy) yet markedly more predictable in-context (lower higher-order conditional entropies), indicating that tokenization absorbs substantial short-range regularity although these gains degrade under train-test domain mismatch. To ground these observations, we first benchmark i) pretrained GPT-family tokenizers as black-box compressors across various domains, and ii) learned tokenizers across configurations spanning vocabulary size, training scale, and domain. Next, we study tokenization as a transform for universal compression and introduce a compression-aware BPE variant. Finally, we adopt a channel lens and introduce capacity-utilization metrics to analyze tokenizer behaviour and outline implications for downstream modeling. Put together, our results expose various trade-offs between compression, induced structure, and robustness under domain shift, and motivate principled, compression-aware tokenizer design.

Subword tokenization has become the de-facto standard for tokenization, although comparative evaluations of subword vocabulary quality across languages are scarce. Existing evaluation studies focus on the effect of a tokenization algorithm on the performance in downstream tasks, or on engineering criteria such as the compression rate. We present a new evaluation paradigm that focuses on the cognitive plausibility of subword tokenization. We analyze the correlation of the tokenizer output with the response time and accuracy of human performance on a lexical decision task. We compare three tokenization algorithms across several languages and vocabulary sizes. Our results indicate that the UnigramLM algorithm yields less cognitively plausible tokenization behavior and a worse coverage of derivational morphemes, in contrast with prior work.

Modern large language model (LLM) applications increasingly rely on long conditioning prefixes to control model behavior at inference time. While prefix-augmented inference is effective, it incurs two structural limitations: i) the prefix's influence fades as generation proceeds, and ii) attention computation over the prefix scales linearly with its length. Existing approaches either keep the prefix in attention while compressing it, or internalize it into model parameters through gradient-based training. The former still attends to the prefix at inference, while the latter is training-intensive and ill-suited to prefix updates. To address these issues, we propose attention-state memory, a training-free approach that externalizes the prefix into a lightweight, lookup-based memory of precomputed attention states between prefix and query tokens. On ManyICLBench with LLaMA-3.1-8B, our method improves accuracy over in-context learning at 1K-8K memory budgets while reducing attention latency by 1.36x at 8K, and surpasses full-attention RAG performance on NBA benchmark using only 20% of its memory footprint.

Tokenizer adaptation plays an important role in transferring pre-trained language models to new domains or languages. In this work, we address two complementary aspects of this process: vocabulary extension and pruning. The common approach to extension trains a new tokenizer on domain-specific text and appends the tokens that do not overlap with the existing vocabulary, which often results in many tokens that are unreachable or never used. We propose continued BPE training, which adapts a pre-trained tokenizer by continuing the BPE merge learning process on new data. Experiments across multiple languages and model families show that this approach improves tokenization efficiency and leads to better utilization of added vocabulary. We also introduce leaf-based vocabulary pruning, which removes redundant tokens while preserving model quality. Together, these methods provide practical tools for controlled vocabulary modification, which we release as an open-source package.

While LLMs are powerful embedding backbones, their application in training-free settings faces two structural challenges: causal attention restricts early tokens from accessing subsequent context, and the next-token prediction objective biases representations toward generation rather than semantic compression. To address these limitations, we propose KV-Embedding, a framework that activates the latent representation power of frozen LLMs. Our method leverages the observation that the key-value (KV) states of the final token at each layer encode a compressed view of the sequence. By re-routing these states as a prepended prefix, we enable all tokens to access sequence-level context within a single forward pass. To ensure model-agnostic applicability, we introduce an automated layer selection strategy based on intrinsic dimensionality. Evaluations on MTEB across Qwen, Mistral, and Llama backbones show that KV-Embedding outperforms existing training-free baselines by up to 10%, while maintaining robust performance on sequences up to 4,096 tokens. These results demonstrate that internal state manipulation offers an efficient alternative to input modification, and we hope this work encourages further exploration of LLM internals for representation learning.

Large language models (LLMs) rely on key-value (KV) caches for efficient autoregressive decoding; however, cache size grows linearly with context length and model depth, becoming a major bottleneck in long-context inference. Prior KV cache compression methods either enforce rigid heuristics, disrupt tensor layouts with per-attention-head variability, or require specialized compute kernels. We propose a simple, yet effective, KV cache compression framework based on attention-guided, layer-adaptive composite tokens. Our method aggregates attention scores to estimate token importance, selects head-specific tokens independently, and aligns them into composite tokens that respect the uniform cache structure required by existing inference engines. A global allocation mechanism further adapts retention budgets across layers, assigning more capacity to layers with informative tokens. This approach achieves significant memory reduction while preserving accuracy, consistently outperforming prior structured and semi-structured methods. Crucially, our approach remains fully compatible with standard inference pipelines, offering a practical and scalable solution for efficient long-context LLM deployment.

Large Language Models (LLMs) rely on the Key-Value (KV) Cache to store token history, enabling efficient decoding of tokens. As the KV-Cache grows, it becomes a major memory and computation bottleneck, however, there is an opportunity to alleviate this bottleneck, especially because prior research has shown that only a small subset of tokens contribute meaningfully to each decoding step. A key challenge in finding these critical tokens is that they are dynamic, and heavily input query-dependent. Existing methods either risk quality by evicting tokens permanently, or retain the full KV-Cache but rely on retrieving chunks (pages) of tokens at generation, failing at dense, context-rich tasks. Additionally, many existing KV-Cache sparsity methods rely on inaccurate proxies for token importance. To address these limitations, we introduce TokenButler, a high-granularity, query-aware predictor that learns to identify these critical tokens. By training a light-weight predictor with less than 1.2% parameter overhead, TokenButler prioritizes tokens based on their contextual, predicted importance. This improves perplexity & downstream accuracy by over 8% relative to SoTA methods for estimating token importance. We evaluate TokenButler on a novel synthetic small-context co-referential retrieval task, demonstrating near-oracle accuracy. Code, models and benchmarks: https://github.com/abdelfattah-lab/TokenButler

Recent advances in large language models (LLMs) have significantly boosted long-context processing. However, the increasing key-value (KV) cache size poses critical challenges to memory and execution efficiency. Most KV cache compression methods rely on heuristic token eviction using all attention heads in Grouped Query Attention (GQA)-based LLMs. This method ignores the different functionalities of attention heads, leading to the eviction of critical tokens and thus degrades the performance of LLMs. To address the issue above, instead of using all the attention heads in GQA-based LLMs to determine important tokens as in the previous work, we first identify the attention heads in each layer that are not only capable of retrieving the initial and final tokens of a prompt, but also capable of retrieving important tokens within the text and attending to their surrounding semantic context. Afterwards, we exploit such heads to determine the important tokens and retain their corresponding KV cache pairs. Furthermore, we analyze the cache eviction error of each layer individually and introduce a layer-adaptive KV cache allocation strategy. Experimental results demonstrate the proposed CompressKV consistently outperforms state-of-the-art approaches under various memory budgets on LongBench and Needle-in-a-Haystack benchmarks. Our code is publicly available at: https://github.com/TUDa-HWAI/CompressKV.git.

Recently, prefix-tuning has gained increasing attention as a parameter-efficient finetuning method for large-scale pretrained language models. The method keeps the pretrained models fixed and only updates the prefix token parameters for each downstream task. Despite being lightweight and modular, prefix-tuning still lacks robustness to textual adversarial attacks. However, most currently developed defense techniques necessitate auxiliary model update and storage, which inevitably hamper the modularity and low storage of prefix-tuning. In this work, we propose a robust prefix-tuning framework that preserves the efficiency and modularity of prefix-tuning. The core idea of our framework is leveraging the layerwise activations of the language model by correctly-classified training data as the standard for additional prefix finetuning. During the test phase, an extra batch-level prefix is tuned for each batch and added to the original prefix for robustness enhancement. Extensive experiments on three text classification benchmarks show that our framework substantially improves robustness over several strong baselines against five textual attacks of different types while maintaining comparable accuracy on clean texts. We also interpret our robust prefix-tuning framework from the optimal control perspective and pose several directions for future research.

Extensive LLM applications demand efficient structured generations, particularly for LR(1) grammars, to produce outputs in specified formats (e.g., JSON). Existing methods primarily parse LR(1) grammars into a pushdown automaton (PDA), leading to runtime execution overhead for context-dependent token processing, especially inefficient under large inference batches. To address these issues, we propose Pre^3 that exploits deterministic pushdown automata (DPDA) to optimize the constrained LLM decoding efficiency. First, by precomputing prefix-conditioned edges during the preprocessing, Pre^3 enables ahead-of-time edge analysis and thus makes parallel transition processing possible. Second, by leveraging the prefix-conditioned edges, Pre^3 introduces a novel approach that transforms LR(1) transition graphs into DPDA, eliminating the need for runtime path exploration and achieving edge transitions with minimal overhead. Pre^3 can be seamlessly integrated into standard LLM inference frameworks, reducing time per output token (TPOT) by up to 40% and increasing throughput by up to 36% in our experiments. Our code is available at https://github.com/ModelTC/lightllm.

Tokenization significantly influences language models(LMs)' performance. This paper traces the evolution of tokenizers from word-level to subword-level, analyzing how they balance tokens and types to enhance model adaptability while controlling complexity. Despite subword tokenizers like Byte Pair Encoding (BPE) overcoming many word tokenizer limitations, they encounter difficulties in handling non-Latin languages and depend heavily on extensive training data and computational resources to grasp the nuances of multiword expressions (MWEs). This article argues that tokenizers, more than mere technical tools, should drawing inspiration from the cognitive science about human language processing. This study then introduces the "Principle of Least Effort" from cognitive science, that humans naturally seek to reduce cognitive effort, and discusses the benefits of this principle for tokenizer development. Based on this principle, the paper proposes that the Less-is-Better (LiB) model could be a new approach for LLM tokenizer. The LiB model can autonomously learn an integrated vocabulary consisting of subwords, words, and MWEs, which effectively reduces both the numbers of tokens and types. Comparative evaluations show that the LiB tokenizer outperforms existing word and BPE tokenizers, presenting an innovative method for tokenizer development, and hinting at the possibility of future cognitive science-based tokenizers being more efficient.

Large Language Models (LLMs) based on transformer architectures have revolutionized a variety of domains, with tokenization playing a pivotal role in their pre-processing and fine-tuning stages. In multilingual models, particularly those tailored for Indic languages, effective tokenization is crucial for optimizing performance. This paper presents a comprehensive evaluation of tokenizers used by 12 LLMs across all 22 official languages of India, with a focus on comparing the efficiency of their tokenization processes. We employed the Normalized Sequence Length (NSL) as a key metric in our analysis. Our findings reveal that the SUTRA tokenizer outperforms all other models, including several Indic-specific models, excelling in 14 languages. Notable insights include the SUTRA tokenizer's superior handling of Indic languages, GPT-4o's advancement over its predecessor GPT-4 in processing Indian languages, and the limited performance of Project Indus in certain languages. This study underscores the critical importance of developing targeted tokenization strategies for multilingual and Indic-centric models, laying the groundwork for future improvements in tokenizer design to enhance linguistic coverage and model efficiency.

With the expanding application of Large Language Models (LLMs) in various domains, it becomes imperative to comprehensively investigate their unforeseen behaviors and consequent outcomes. In this study, we introduce and systematically explore the phenomenon of "glitch tokens", which are anomalous tokens produced by established tokenizers and could potentially compromise the models' quality of response. Specifically, we experiment on seven top popular LLMs utilizing three distinct tokenizers and involving a totally of 182,517 tokens. We present categorizations of the identified glitch tokens and symptoms exhibited by LLMs when interacting with glitch tokens. Based on our observation that glitch tokens tend to cluster in the embedding space, we propose GlitchHunter, a novel iterative clustering-based technique, for efficient glitch token detection. The evaluation shows that our approach notably outperforms three baseline methods on eight open-source LLMs. To the best of our knowledge, we present the first comprehensive study on glitch tokens. Our new detection further provides valuable insights into mitigating tokenization-related errors in LLMs.

Visual place recognition (VPR) is typically regarded as a specific image retrieval task, whose core lies in representing images as global descriptors. Over the past decade, dominant VPR methods (e.g., NetVLAD) have followed a paradigm that first extracts the patch features/tokens of the input image using a backbone, and then aggregates these patch features into a global descriptor via an aggregator. This backbone-plus-aggregator paradigm has achieved overwhelming dominance in the CNN era and remains widely used in transformer-based models. In this paper, however, we argue that a dedicated aggregator is not necessary in the transformer era, that is, we can obtain robust global descriptors only with the backbone. Specifically, we introduce some learnable aggregation tokens, which are prepended to the patch tokens before a particular transformer block. All these tokens will be jointly processed and interact globally via the intrinsic self-attention mechanism, implicitly aggregating useful information within the patch tokens to the aggregation tokens. Finally, we only take these aggregation tokens from the last output tokens and concatenate them as the global representation. Although implicit aggregation can provide robust global descriptors in an extremely simple manner, where and how to insert additional tokens, as well as the initialization of tokens, remains an open issue worthy of further exploration. To this end, we also propose the optimal token insertion strategy and token initialization method derived from empirical studies. Experimental results show that our method outperforms state-of-the-art methods on several VPR datasets with higher efficiency and ranks 1st on the MSLS challenge leaderboard. The code is available at https://github.com/lu-feng/image.

The deployment of Large Language Models (LLMs) faces a critical bottleneck when handling lengthy inputs: the prohibitive memory footprint of the Key Value (KV) cache. To address this bottleneck, the token pruning paradigm leverages attention sparsity to selectively retain a small, critical subset of tokens. However, existing approaches fall short, with static methods risking irreversible information loss and dynamic strategies employing heuristics that insufficiently capture the query-dependent nature of token importance. We propose FASA, a novel framework that achieves query-aware token eviction by dynamically predicting token importance. FASA stems from a novel insight into RoPE: the discovery of functional sparsity at the frequency-chunk (FC) level. Our key finding is that a small, identifiable subset of "dominant" FCs consistently exhibits high contextual agreement with the full attention head. This provides a robust and computationally free proxy for identifying salient tokens. %making them a powerful and efficient proxy for token importance. Building on this insight, FASA first identifies a critical set of tokens using dominant FCs, and then performs focused attention computation solely on this pruned subset. % Since accessing only a small fraction of the KV cache, FASA drastically lowers memory bandwidth requirements and computational cost. Across a spectrum of long-context tasks, from sequence modeling to complex CoT reasoning, FASA consistently outperforms all token-eviction baselines and achieves near-oracle accuracy, demonstrating remarkable robustness even under constraint budgets. Notably, on LongBench-V1, FASA reaches nearly 100\% of full-KV performance when only keeping 256 tokens, and achieves 2.56times speedup using just 18.9\% of the cache on AIME24.

The quality of subword tokenization is critical for Large Language Models, yet evaluating tokenizers for morphologically rich Uralic languages is hampered by the lack of clean morpheme lexicons. We introduce SampoNLP, a corpus-free toolkit for morphological lexicon creation using MDL-inspired Self-Referential Atomicity Scoring, which filters composite forms through internal structural cues - suited for low-resource settings. Using the high-purity lexicons generated by SampoNLP for Finnish, Hungarian, and Estonian, we conduct a systematic evaluation of BPE tokenizers across a range of vocabulary sizes (8k-256k). We propose a unified metric, the Integrated Performance Score (IPS), to navigate the trade-off between morpheme coverage and over-splitting. By analyzing the IPS curves, we identify the "elbow points" of diminishing returns and provide the first empirically grounded recommendations for optimal vocabulary sizes (k) in these languages. Our study not only offers practical guidance but also quantitatively demonstrates the limitations of standard BPE for highly agglutinative languages. The SampoNLP library and all generated resources are made publicly available: https://github.com/AragonerUA/SampoNLP

Large language models have demonstrated exceptional performance, yet struggle with complex tasks such as numerical reasoning, plan generation. Integrating external tools, such as calculators and databases, into large language models (LLMs) is crucial for enhancing problem-solving capabilities. Current methods assign a unique token to each tool, enabling LLMs to call tools through token prediction-similar to word generation. However, this approach fails to account for the relationship between tool and word tokens, limiting adaptability within pre-trained LLMs. To address this issue, we propose a novel token learning method that aligns tool tokens with the existing word embedding space from the perspective of initialization, thereby enhancing model performance. We begin by constructing prior token embeddings for each tool based on the tool's name or description, which are used to initialize and regularize the learnable tool token embeddings. This ensures the learned embeddings are well-aligned with the word token space, improving tool call accuracy. We evaluate the method on tasks such as numerical reasoning, knowledge-based question answering, and embodied plan generation using GSM8K-XL, FuncQA, KAMEL, and VirtualHome datasets. The results demonstrate clear improvements over recent baselines, including CoT, REACT, ICL, and ToolkenGPT, indicating that our approach effectively augments LLMs with tools through relevant tokens across diverse domains.

The number of tokens it takes to encode parallel text in different languages is known to vary. These disparities are called token premiums. Having high token premiums leads to less throughput during training and increases costs at inference. In this paper, we show that even after controlling for dataset size, vocabulary size, and data content, monolingual tokenizers exhibit a wide range of token premiums across languages. To understand the cross-linguistic differences that cause these token premiums, we train a suite of approximately 7,000 comparable monolingual tokenizers for 97 languages, manipulating tokenization algorithm, vocabulary size, and dataset size. We measure token premiums and test for a relationship between factors such as data similarity (between tokenizer training and evaluation), vocabulary size, and pre-tokenization. We also investigate the role of language-specific features such as writing system and word length. We find that similarity between training and test data does not impact token premiums, but vocabulary size and pre-tokenization do. While simply increasing vocabulary size does not lead to reduced token premium effects, we can determine an ``optimal'' vocabulary size for each language to achieve significantly reduced token premium effects. We also train superword tokenizers which allow merges over whitespaces, and we find that they both reduce token premium effects and improve compression overall. Thus, intervening on the vocabulary size or the pre-tokenizer significantly reduces crosslingual token premium effects.

This paper proposes a fundamentally new paradigm for image generation through set-based tokenization and distribution modeling. Unlike conventional methods that serialize images into fixed-position latent codes with a uniform compression ratio, we introduce an unordered token set representation to dynamically allocate coding capacity based on regional semantic complexity. This TokenSet enhances global context aggregation and improves robustness against local perturbations. To address the critical challenge of modeling discrete sets, we devise a dual transformation mechanism that bijectively converts sets into fixed-length integer sequences with summation constraints. Further, we propose Fixed-Sum Discrete Diffusion--the first framework to simultaneously handle discrete values, fixed sequence length, and summation invariance--enabling effective set distribution modeling. Experiments demonstrate our method's superiority in semantic-aware representation and generation quality. Our innovations, spanning novel representation and modeling strategies, advance visual generation beyond traditional sequential token paradigms. Our code and models are publicly available at https://github.com/Gengzigang/TokenSet.

Code completion is an essential feature of IDEs, yet current autocompleters are restricted to either grammar-based or NLP-based single token completions. Both approaches have significant drawbacks: grammar-based autocompletion is restricted in dynamically-typed language environments, whereas NLP-based autocompleters struggle to understand the semantics of the programming language and the developer's code context. In this work, we present CodeFill, a language model for autocompletion that combines learned structure and naming information. Using a parallel Transformer architecture and multi-task learning, CodeFill consumes sequences of source code token names and their equivalent AST token types. Uniquely, CodeFill is trained both for single-token and multi-token (statement) prediction, which enables it to learn long-range dependencies among grammatical and naming elements. We train CodeFill on two datasets, consisting of 29M and 425M lines of code, respectively. To make the evaluation more realistic, we develop a method to automatically infer points in the source code at which completion matters. We compare CodeFill against four baselines and two state-of-the-art models, GPT-C and TravTrans+.CodeFill surpasses all baselines in single token prediction (MRR: 70.9% vs. 66.2% and 67.8%) and outperforms the state of the art for multi-token prediction (ROUGE-L: 63.7% vs. 52.4% and 59.2%, for n=4 tokens). We publicly release our source code and datasets.

Diffusion Language Models (DLMs) have emerged as a promising alternative to Autoregressive Language Models, yet their inference strategies remain limited to prefix-based prompting inherited from the autoregressive paradigm. In this paper, we propose Template Infilling (TI), a tailored conditioning methodology for DLMs. Unlike conventional prefix prompting, TI flexibly aligns structural anchors across the entire target response space, establishing a global blueprint before filling in the masked segments. We demonstrate the effectiveness of our approach on diverse benchmarks, including mathematical reasoning, code generation, and trip planning, achieving consistent improvements of 9.40% over the baseline. Furthermore, we observe that TI provides additional advantages in multi-token generation settings, enabling effective speedup while maintaining generation quality and robustness. By enforcing these global constraints, TI ultimately facilitates System-2 reasoning, empowering the model to deliberate within a structurally defined solution space.

Vision-language models commonly project all tokens produced by a pretrained vision encoder into a large language model. However, final-layer features can discard text, local attributes, and spatial relationships, while high-resolution inputs substantially increase context length and inference latency. We introduce \method, a Multi-scale Adaptive Vision Encoder. \method uses position-dependent gates to fuse shallow, intermediate, and deep features from a vision Transformer, preserving global semantics while enhancing edges, text, and local structure. It then performs question-conditioned token routing according to question relevance, local information content, global semantics, and spatial coverage, with a token budget that adapts to image complexity. To mitigate compression loss, we further introduce full-to-compressed representation distillation and a spatial diversity regularizer. In an illustrative simulation under a unified 7B language-model framework, \method reduces the average number of SigLIP-SO400M visual tokens from 729 to 146 (approximately 80.0\%) and improves the mean score on VQAv2, GQA, TextVQA, ScienceQA-IMG, and MMBench by 2.2 percentage points, while reducing single-image time to first token from 228\,ms to 129\,ms. We provide the full model design and evaluation protocol. All reported numbers currently serve only as placeholders for paper organization and experimental design; formal claims require real training runs, independent replications, and official benchmark evaluation.

The development of the Bielik v3 PL series, encompassing both the 7B and 11B parameter variants, represents a significant milestone in the field of language-specific large language model (LLM) optimization. While general-purpose models often demonstrate impressive multilingual capabilities, they frequently suffer from a fundamental architectural inefficiency: the use of universal tokenizers. These tokenizers, typically designed to cover a broad spectrum of languages, often fail to capture the morphological nuances of specific languages like Polish, leading to higher fertility ratios, increased inference costs, and restricted effective context windows. This report details the transition from the universal Mistral-based tokenization to a dedicated Polish-optimized vocabulary for the Bielik v3 models, exploring the FOCUS-based embedding initialization, the multi-stage pretraining curriculum, and the subsequent post-training alignment involving Supervised Fine-Tuning, Direct Preference Optimization, and Reinforcement Learning through Group Relative Policy Optimization with verifiable rewards.

The increasing context window size in Large Language Models (LLMs), such as the GPT and LLaMA series, has improved their ability to tackle complex, long-text tasks, but at the cost of inference efficiency, particularly regarding memory and computational complexity. Existing methods, including selective token retention and window-based attention, improve efficiency but risk discarding important tokens needed for future text generation. In this paper, we propose an approach that enhances LLM efficiency without token loss by reducing the memory and computational load of less important tokens, rather than discarding them.We address two challenges: 1) investigating the distribution of important tokens in the context, discovering recent tokens are more important than distant tokens in context, and 2) optimizing resources for distant tokens by sharing attention scores across layers. The experiments show that our method saves 35% KV cache without compromising the performance.

Structural pruning enhances hardware-agnostic inference efficiency for large language models (LLMs) yet often fails to maintain comparable performance. Local pruning performs efficient layer-by-layer compression but ignores global topology. Although global pruning aims to identify an optimal sparse model, intuitive methods typically adopt a two-stage paradigm that first evaluates substructure saliency and then applies global pruning, which ignores inter-structure dependencies and fails to achieve end-to-end optimization. To address these limitations, we propose T\'yr-the-Pruner, an efficient end-to-end search-based global structural pruning framework. This framework constructs a supernet by repeatedly applying local pruning across a range of sparsity ratios to each layer in an LLM, with the core goal of determining the optimal sparsity distribution under a target overall sparsity ratio. Concretely, we introduce an effective local pruning and an expectation error accumulation approach to improve supernet construction. Furthermore, we employ an iterative prune-and-search strategy with coarse-to-fine sparsity granularity to ensure efficient search convergence. Experimental results show that T\'yr-the-Pruner achieves state-of-the-art structural pruning, retaining 97% of the dense model's performance while removing a challenging 50% of Llama-3.1-70B's parameters. Code will be available at https://github.com/AMD-AGI/Tyr-the-Pruner.

Tokenization is a foundational step in Natural Language Processing (NLP) tasks, bridging raw text and language models. Existing tokenization approaches like Byte-Pair Encoding (BPE) originate from the field of data compression, and it has been suggested that the effectiveness of BPE stems from its ability to condense text into a relatively small number of tokens. We test the hypothesis that fewer tokens lead to better downstream performance by introducing PathPiece, a new tokenizer that segments a document's text into the minimum number of tokens for a given vocabulary. Through extensive experimentation we find this hypothesis not to be the case, casting doubt on the understanding of the reasons for effective tokenization. To examine which other factors play a role, we evaluate design decisions across all three phases of tokenization: pre-tokenization, vocabulary construction, and segmentation, offering new insights into the design of effective tokenizers. Specifically, we illustrate the importance of pre-tokenization and the benefits of using BPE to initialize vocabulary construction. We train 64 language models with varying tokenization, ranging in size from 350M to 2.4B parameters, all of which are made publicly available.

In the development of Large Language Models (LLMs), considerable attention has been given to the quality of training datasets. However, the role of tokenizers in the LLM training pipeline, particularly for multilingual models, has received less focus. The quality of tokenization can significantly impact a model's ability to handle diverse languages effectively. We introduce Qtok, a tool designed to assess tokenizer quality with a specific emphasis on their performance in multilingual contexts. Our research proposes a set of metrics for evaluating tokenizer quality, including measures of language coverage, token completeness, and distribution across languages and linguistic categories. Qtok applies these metrics to evaluate 13 distinct tokenizers from 58 publicly available models, analyzing their output across different linguistic contexts. Our analysis revealed significant variations in token distribution across languages and categories, highlighting potential biases and areas for improvement in current tokenization strategies. This research contributes to the field of tokenizer evaluation within multilingual LLM development by providing a systematic approach to assessing tokenizer quality. Our findings highlight the critical role of tokenization in multilingual LLM capability. The Qtok tool and our analysis methodology offer practical means for researchers to evaluate and improve tokenization strategies for multilingual applications. We offer a method to compare tokenizer quality across these metrics, which may be useful when selecting or adjusting tokenizers for specific multilingual LLM applications.

Tokenization is an important text preprocessing step to prepare input tokens for deep language models. WordPiece and BPE are de facto methods employed by important models, such as BERT and GPT. However, the impact of tokenization can be different for morphologically rich languages, such as Turkic languages, where many words can be generated by adding prefixes and suffixes. We compare five tokenizers at different granularity levels, i.e. their outputs vary from smallest pieces of characters to the surface form of words, including a Morphological-level tokenizer. We train these tokenizers and pretrain medium-sized language models using RoBERTa pretraining procedure on the Turkish split of the OSCAR corpus. We then fine-tune our models on six downstream tasks. Our experiments, supported by statistical tests, reveal that Morphological-level tokenizer has challenging performance with de facto tokenizers. Furthermore, we find that increasing the vocabulary size improves the performance of Morphological and Word-level tokenizers more than that of de facto tokenizers. The ratio of the number of vocabulary parameters to the total number of model parameters can be empirically chosen as 20% for de facto tokenizers and 40% for other tokenizers to obtain a reasonable trade-off between model size and performance.

Tokenizers act as a bridge between human language and the latent space of language models, influencing how language is represented in these models. Due to the immense popularity of English-Centric Large Language Models (LLMs), efforts are being made to adapt them for other languages. However, we demonstrate that, from a tokenization standpoint, not all tokenizers offer fair representation for complex script languages such as Tamil, Sinhala, and Hindi, primarily due to the choice of pre-tokenization methods. We go further to show that pre-tokenization plays a more critical role than the tokenization algorithm itself in achieving an egalitarian representation of these complex script languages. To address this, we introduce an improvement to the Byte Pair Encoding (BPE) algorithm by incorporating graphemes, which we term Grapheme Pair Encoding (GPE). Our experiments show that grapheme-based character extraction outperforms byte-level tokenizers for complex scripts. We validate this approach through experiments on Tamil, Sinhala, and Hindi.

Vision transformer has achieved impressive performance for many vision tasks. However, it may suffer from high redundancy in capturing local features for shallow layers. Local self-attention or early-stage convolutions are thus utilized, which sacrifice the capacity to capture long-range dependency. A challenge then arises: can we access efficient and effective global context modeling at the early stages of a neural network? To address this issue, we draw inspiration from the design of superpixels, which reduces the number of image primitives in subsequent processing, and introduce super tokens into vision transformer. Super tokens attempt to provide a semantically meaningful tessellation of visual content, thus reducing the token number in self-attention as well as preserving global modeling. Specifically, we propose a simple yet strong super token attention (STA) mechanism with three steps: the first samples super tokens from visual tokens via sparse association learning, the second performs self-attention on super tokens, and the last maps them back to the original token space. STA decomposes vanilla global attention into multiplications of a sparse association map and a low-dimensional attention, leading to high efficiency in capturing global dependencies. Based on STA, we develop a hierarchical vision transformer. Extensive experiments demonstrate its strong performance on various vision tasks. In particular, without any extra training data or label, it achieves 86.4% top-1 accuracy on ImageNet-1K with less than 100M parameters. It also achieves 53.9 box AP and 46.8 mask AP on the COCO detection task, and 51.9 mIOU on the ADE20K semantic segmentation task. Code will be released at https://github.com/hhb072/SViT.

The disconnect between tokenizer creation and model training in language models has been known to allow for certain inputs, such as the infamous SolidGoldMagikarp token, to induce unwanted behaviour. Although such `glitch tokens' that are present in the tokenizer vocabulary, but are nearly or fully absent in training, have been observed across a variety of different models, a consistent way of identifying them has been missing. We present a comprehensive analysis of Large Language Model (LLM) tokenizers, specifically targeting this issue of detecting untrained and under-trained tokens. Through a combination of tokenizer analysis, model weight-based indicators, and prompting techniques, we develop effective methods for automatically detecting these problematic tokens. Our findings demonstrate the prevalence of such tokens across various models and provide insights into improving the efficiency and safety of language models.

Large language models (LLMs) have reshaped the landscape of program synthesis. However, contemporary LLM-based code completion systems often hallucinate broken code because they lack appropriate context, particularly when working with definitions not in the training data nor near the cursor. This paper demonstrates that tight integration with the type and binding structure of a language, as exposed by its language server, can address this contextualization problem in a token-efficient manner. In short, we contend that AIs need IDEs, too! In particular, we integrate LLM code generation into the Hazel live program sketching environment. The Hazel Language Server identifies the type and typing context of the hole being filled, even in the presence of errors, ensuring that a meaningful program sketch is always available. This allows prompting with codebase-wide contextual information not lexically local to the cursor, nor necessarily in the same file, but that is likely to be semantically local to the developer's goal. Completions synthesized by the LLM are then iteratively refined via further dialog with the language server. To evaluate these techniques, we introduce MVUBench, a dataset of model-view-update (MVU) web applications. These applications serve as challenge problems due to their reliance on application-specific data structures. We find that contextualization with type definitions is particularly impactful. After introducing our ideas in the context of Hazel we duplicate our techniques and port MVUBench to TypeScript in order to validate the applicability of these methods to higher-resource languages. Finally, we outline ChatLSP, a conservative extension to the Language Server Protocol (LSP) that language servers can implement to expose capabilities that AI code completion systems of various designs can use to incorporate static context when generating prompts for an LLM.

Language models spend most of their attention on a small fraction of context, yet they read the entire KV cache to find the few tokens that matter. If the user asks about a previous detail in a 1M-token conversation, global attention layers must scan the full context to generate each token of the reply. A prominent approach mitigates this cost by pre-selecting relevant tokens via lightweight proxy scores, but this extrinsic scoring still incurs O(N) per step. We take an intrinsic approach motivated by the simple question: wouldn't the model already know which parts of the context are relevant? To this end, we introduce Declarative Attention (DA), a protocol that elicits the model to declare where it needs to attend within its chain-of-thought, partitioning generation into three modes: <global> (full context), <focus> (a specific region), and <local> (recent output only). The inference engine parses these declarations like tool calls and skips most of the KV cache read. Under zero-shot evaluation across 15 long-context tasks, DA on off-the-shelf models (Gemma-4-31B, Qwen-3.6-27B) significantly reduces total attended tokens during decoding (52.0%, 31.1%) with modest accuracy drops (1.27pp, 2.75pp) that shrink with model scale. DA unlocks a new axis of sparse attention, with further potential under training-based methods that future work can explore.

Token-level credit assignment remains a key obstacle for reinforcement learning (RL) in large language models (LLMs), where RL recipes typically treat all tokens equally, failing to distinguish decisive reasoning steps from routine formatting or fluent filler. Recent attempts leverage model-internal signals to assign finer-grained credit, but these are often point-wise heuristics that ignore the global structure of information propagation. We propose FlowTracer, an RL framework that traces answer-targeted reasoning flow on an attention-induced directed acyclic graph in which nodes correspond to tokens and edge capacities come from aggregated attention weights and derives token credit from this global structure. The edge capacities are reweighted to retain only the influence that can reach the answer region, while enforcing local flow conservation so intermediate tokens neither lose nor gain effective mass due to path length or irrelevant branches. On this graph, FlowTracer extracts an information-flow backbone connecting the question to the answer and scores tokens by flow throughput, revealing high-impact hubs and aggregation checkpoints that mediate long-range dependencies. These derived importances are used to shape token-level rewards, enabling learning signals to focus precisely on the tokens that route information toward (or away from) correct answers and delivering consistent performance gains across a range of reasoning tasks.

Retrieval-Augmented Generation (RAG) enhances coding tasks by incorporating retrieved code examples into prompts. However, lengthy prompts, often exceeding tens of thousands of tokens, introduce challenges related to limited context windows of language models (LMs) and high computational costs. Existing prompt compression techniques focus on natural language, lacking tailored solutions for code. To address the gap, we propose CodePromptZip, a framework that compresses code examples before integrating into RAG workflows. Our framework employs a type-aware, priority-driven strategy to construct training samples for training code compression model. By using program analysis, we identify token types (e.g., Identifier) and perform ablation analysis to rank their removal priorities based on their impact on task performance. We then train a small LM as the compressor on these samples, enabling flexible compression conditioned on specified ratios while minimizing performance degradation. Specially, the compressor is augmented with a copy mechanism, allowing tokens to be directly copied from the original code snippets. Evaluation results show that CodePromptZip surpasses SOTA entropy-based and distillation-based baselines, improving by 23.4%, 28.7%, and 8.7% over the best baseline for Assertion Generation, Bugs2Fix, and Code Suggestion, respectively.

Large language models (LLMs) for code rely on subword tokenizers, such as byte-pair encoding (BPE), learned from mixed natural language text and programming language code but driven by statistics rather than grammar. As a result, semantically identical code snippets can be tokenized differently depending on superficial factors such as whitespace or identifier naming. To measure the impact of this misalignment, we introduce TokDrift, a framework that applies semantic-preserving rewrite rules to create code variants differing only in tokenization. Across nine code LLMs, including large ones with over 30B parameters, even minor formatting changes can cause substantial shifts in model behavior. Layer-wise analysis shows that the issue originates in early embeddings, where subword segmentation fails to capture grammar token boundaries. Our findings identify misaligned tokenization as a hidden obstacle to reliable code understanding and generation, highlighting the need for grammar-aware tokenization for future code LLMs.

Multilingual language models have recently gained attention as a promising solution for representing multiple languages in a single model. In this paper, we propose new criteria to evaluate the quality of lexical representation and vocabulary overlap observed in sub-word tokenizers. Our findings show that the overlap of vocabulary across languages can be actually detrimental to certain downstream tasks (POS, dependency tree labeling). In contrast, NER and sentence-level tasks (cross-lingual retrieval, NLI) benefit from sharing vocabulary. We also observe that the coverage of the language-specific tokens in the multilingual vocabulary significantly impacts the word-level tasks. Our study offers a deeper understanding of the role of tokenizers in multilingual language models and guidelines for future model developers to choose the most suitable tokenizer for their specific application before undertaking costly model pre-training

Large Language Models (LLMs) have been widely adopted in commercial code completion engines, significantly enhancing coding efficiency and productivity. However, LLMs may generate code with quality issues that violate coding standards and best practices, such as poor code style and maintainability, even when the code is functionally correct. This necessitates additional effort from developers to improve the code, potentially negating the efficiency gains provided by LLMs. To address this problem, we propose a novel comparative prefix-tuning method for controllable high-quality code generation. Our method introduces a single, property-specific prefix that is prepended to the activations of the LLM, serving as a lightweight alternative to fine-tuning. Unlike existing methods that require training multiple prefixes, our approach trains only one prefix and leverages pairs of high-quality and low-quality code samples, introducing a sequence-level ranking loss to guide the model's training. This comparative approach enables the model to better understand the differences between high-quality and low-quality code, focusing on aspects that impact code quality. Additionally, we design a data construction pipeline to collect and annotate pairs of high-quality and low-quality code, facilitating effective training. Extensive experiments on the Code Llama 7B model demonstrate that our method improves code quality by over 100% in certain task categories, while maintaining functional correctness. We also conduct ablation studies and generalization experiments, confirming the effectiveness of our method's components and its strong generalization capability.

Byte-based machine translation systems have shown significant potential in massively multilingual settings. Unicode encoding, which maps each character to specific byte(s), eliminates the emergence of unknown words, even in new languages. This avoids out-of-vocabulary risk in multilingual translation and enables broad language scalability. However, byte-level tokenization results in sequences that are hard to interpret due to limited semantic information per byte. Local contextualization has proven effective in assigning initial semantics to tokens, improving sentence comprehension. Nevertheless, variations in encoding rules across languages necessitate an adaptive approach for effective contextualization. To this end, we propose Mixture of Contextualization Experts (MoCE), adaptively selecting and mixing attention heads, which are treated as contextualization experts. This enhances the flexibility of contextualization scales and allows models to search for better contextualization combinations. Experiment results show that our method outperforms existing methods without extensive manual adjustment of hyper-parameters and surpasses subword-based models with fewer parameters in Ted-59 dataset. Our code is available at https://github.com/ictnlp/MoCE.

Most of the major databases on the semantic web have links to Princeton WordNet (PWN) synonym set (synset) identifiers, which differ for each PWN release, and are thus incompatible between versions. On the other hand, both PWN and the more recent Open English Wordnet (OEWN) provide permanent word sense identifiers (the sense keys), which can solve this interoperability problem. We present an algorithm that runs in linear time, to automatically derive a synset mapping between any pair of Wordnet versions that use PWN sense keys. This allows to update old WordNet links, and seamlessly interoperate with newer English Wordnet versions for which no prior mapping exists. By applying the proposed algorithm on the fly, at load time, we combine the Open Multilingual Wordnet (OMW 1.4, which uses old PWN 3.0 identifiers) with OEWN Edition 2021, and obtain almost perfect precision and recall. We compare the results of our approach using respectively synset offsets, versus the Collaborative InterLingual Index (CILI version 1.0) as synset identifiers, and find that the synset offsets perform better than CILI 1.0 in all cases, except a few ties.

Tokenization, the division of input text into input tokens, is an often overlooked aspect of the large language model (LLM) pipeline and could be the source of useful or harmful inductive biases. Historically, LLMs have relied on byte pair encoding, without care to specific input domains. With the increased use of LLMs for reasoning, various number-specific tokenization schemes have been adopted, with popular models like LLaMa and PaLM opting for single-digit tokenization while GPT-3.5 and GPT-4 have separate tokens for each 1-, 2-, and 3-digit numbers. In this work, we study the effect this choice has on numerical reasoning through the use of arithmetic tasks. We consider left-to-right and right-to-left tokenization for GPT-3.5 and -4, finding that right-to-left tokenization (enforced by comma separating numbers at inference time) leads to largely improved performance. Furthermore, we find that model errors when using standard left-to-right tokenization follow stereotyped error patterns, suggesting that model computations are systematic rather than approximate. We show that the model is able to convert between tokenizations easily, thus allowing chain-of-thought-inspired approaches to recover performance on left-to-right tokenized inputs. We also find the gap between tokenization directions decreases when models are scaled, possibly indicating that larger models are better able to override this tokenization-dependent inductive bias. In summary, our work performs the first study of how number tokenization choices lead to differences in model performance on arithmetic tasks, accompanied by a thorough analysis of error patterns. We hope this work inspires practitioners to more carefully ablate number tokenization-related choices when working towards general models of numerical reasoning.

A tokenizer fixed at the start of pre-training allocates vocabulary in proportion to the pre-training corpus, reflecting the deployment priorities at that time. When those priorities shift, languages added later are split into many more tokens per word, which can raise latency, compute, and energy consumption for users of those languages. Cloud models can afford a broad vocabulary because the embedding and LM-head matrices are a small fraction of their parameters. On a compact model those matrices are a material share of per-token decode bandwidth, so on-device models ship small vocabularies and accept fragmentation outside a fixed language set. We present tokenizer expansion, an in-place recipe for upgrading a pre-trained model's tokenizer when the model producer controls its design. We continue the existing tokenizer's BPE merges on a multilingual corpus, so most source tokens carry over unchanged as single tokens and every new token has an exact decomposition into source tokens. We copy the carried-over embedding rows unchanged and initialize new rows as the mean of their source sub-token embeddings. A two-stage adaptation, embedding-only training then full-model continued pre-training, recovers source-checkpoint quality. We apply the recipe to a continued pre-trained checkpoint of LFM2-8B-A1B, an 8B-parameter Mixture-of-Experts model, to help produce LFM2.5-8B-A1B with a 128K tokenizer. The expanded tokenizer encodes Hindi and Vietnamese in roughly 2.4times and 2.6times fewer tokens than the source (up to 4.0times on Thai). Combining these reductions with the measured per-token cost of the larger vocabulary, we estimate a 2.2-3.7times per-character decode speedup for these languages across our reference devices. We release the model weights and the expanded tokenizer, and report the negative findings that shaped the recipe.

Tokenization is a critical preprocessing step for large language models (LLMs), directly impacting training efficiency and downstream performance. General-purpose tokenizers trained predominantly on English and Latin-script languages exhibit suboptimal performance on morphologically rich languages such as Arabic, resulting in inflated token sequences and reduced compression efficiency. In this work, we present AraToken, an Arabic-optimized tokenizer built on SentencePiece Unigram algorithm with a comprehensive normalization pipeline addressing Arabic-specific orthographic variations including Alif variants, diacritics, and Arabic-Indic numerals. We systematically compare BPE, WordPiece, and SentencePiece algorithms across multiple configurations, demonstrating that SentencePiece with normalization achieves 18% lower fertility (1.199 vs 1.35 tokens/word) compared to unnormalized baselines. Furthermore, we introduce the Language Extension Pipeline (LEP), a method for integrating the optimized tokenizer into Qwen3-0.6B through vocabulary extension with mean subtoken initialization and selective transformer layer unfreezing. Our experiments show that LEP reduces evaluation loss from 8.28 to 2.43 within 800 training steps on 100K Arabic samples. We release our tokenizer, training scripts, and model checkpoints to facilitate Arabic NLP research.

Large reasoning models achieve strong performance through test-time scaling but incur substantial computational overhead, particularly from excessive token generation when processing short input prompts. While sparse attention mechanisms can reduce latency and memory usage, existing approaches suffer from significant accuracy degradation due to accumulated errors during long-generation reasoning. These methods generally require either high token retention rates or expensive retraining. We introduce LessIsMore, a training-free sparse attention mechanism for reasoning tasks, which leverages global attention patterns rather than relying on traditional head-specific local optimizations. LessIsMore aggregates token selections from local attention heads with recent contextual information, enabling unified cross-head token ranking for future decoding layers. This unified selection improves generalization and efficiency by avoiding the need to maintain separate token subsets per head. Evaluation across diverse reasoning tasks and benchmarks shows that LessIsMore preserves -- and in some cases improves -- accuracy while achieving a 1.1times average decoding speed-up compared to full attention. Moreover, LessIsMore attends to 2times fewer tokens without accuracy loss, achieving a 1.13times end-to-end speed-up compared to existing sparse attention methods.

Reasoning capability has advanced rapidly in large language models (LLMs), leading to an increasing size of key-value (KV) cache in both prefilling and decoding stages. Existing KV cache compression methods mainly rely on attention weights to estimate token importance. While attention effectively captures contextual relevance, it overlooks complementary information-theoretic signals related to predictive uncertainty and token informativeness. In this paper, we revisit token importance from a forward-looking perspective and introduce Forward Influence, a metric that measures how compressed tokens affect future contexts. Our analysis reveals that tokens selected by attention scores mainly influence nearby contexts, whereas tokens associated with high predictive uncertainty exhibit substantially stronger influence on distant future contexts. Based on the observation, we propose InfoKV, an entropy-aware KV cache compression framework that incorporates information-theoretic signals. It combines token-level predictive uncertainty with layer-wise representation evolution and integrates the resulting entropy scores with attention scores during reasoning. Experiments on long-context reasoning benchmarks with Llama-3.1, Llama-3.2, and DeepSeek-R1 demonstrate that InfoKV consistently outperforms existing attention-based KV compression methods in both long prefilling and decoding scenarios.

Byte Pair Encoding (BPE) is a widely used tokenization algorithm, whose tokens cannot extend across pre-tokenization boundaries, functionally limiting it to representing at most full words. The BoundlessBPE and SuperBPE algorithms extend and improve BPE by relaxing this limitation and allowing the formation of superwords, which are combinations of pretokens that form phrases. However, previous implementations were impractical to train: for example, BoundlessBPE took 4.7 CPU days to train on 1GB of data. We show that supermerge candidates, two or more consecutive pretokens eligible to form a supermerge, can be aggregated by frequency much like regular pretokens. This avoids keeping full documents in memory, as the original implementations of BoundlessBPE and SuperBPE required, leading to a significant training speedup. We present a two-phase formulation of BoundlessBPE that separates first-phase learning of regular merges from second-phase learning of supermerges, producing identical results to the original implementation. We also show a near-equivalence between two-phase BoundlessBPE and SuperBPE, with the difference being that a manually selected hyperparameter used in SuperBPE can be automatically determined in the second phase of BoundlessBPE. These changes enable a much faster implementation, allowing training on that same 1GB of data in 603 and 593 seconds for BoundlessBPE and SuperBPE, respectively, a more than 600x increase in speed. For each of BoundlessBPE, SuperBPE, and BPE, we open-source both a reference Python implementation and a fast Rust implementation.

The growing demand for efficient Large Language Model (LLM) inference requires a holistic optimization on algorithms, systems, and hardware. However, very few works have fundamentally changed the generation pattern: each token needs one forward pass and one KV cache. This can be sub-optimal because we found that LLMs are extremely capable of self-identifying the exact dose of information that a single KV cache can store, and many tokens can be generated confidently without global context. Based on this insight, we introduce HAMburger, a Hierarchically Auto-regressive Model that redefines resource allocation in LLMs by moving beyond uniform computation and storage per token during inference. Stacking a compositional embedder and a micro-step decoder in between a base LLM, HAMburger smashes multiple tokens into a single KV and generates several tokens per step. Additionally, HAMburger functions as a speculative decoding framework where it can blindly trust self-drafted tokens. As a result, HAMburger shifts the growth of KV cache and forward FLOPs from linear to sub-linear with respect to output length, and adjusts its inference speed based on query perplexity and output structure. Extensive evaluations show that HAMburger reduces the KV cache computation by up to 2times and achieves up to 2times TPS, while maintaining quality in both short- and long-context tasks. Our method explores an extremely challenging inference regime that requires both computation- and memory-efficiency with a hardware-agnostic design.

Tokenizer fertility the number of tokens per word imposes a hidden cost on non-English NLP. We measure fertility for ten foundation models across 25 European languages on parallel text, producing the first controlled tokenizer tax map for the continent. The tax spans 2.5x from English (1.2 tokens/word) to Greek/Maltese (~3.1), following a clear hierarchy: Romance (1.5-1.7), Germanic (1.7-1.9), Slavic (2.2-2.5), Uralic/Baltic (2.7-3.0). Ukrainian (2.7) pays 15-18% more than cognate Slavic languages, reflecting underrepresentation in pre-training data. Fertility rankings are domain-invariant across three text registers (rho > 0.97). A subword analysis reveals that high-fertility tokenizers fragment morphological boundaries rather than preserving them. Cross-lingual few-shot evaluation on four Slavic languages shows that few-shot effects are model-intrinsic, not language-dependent. We release all measurements as a public dataset.

Common subword tokenization algorithms like BPE and UnigramLM assume that text can be split into meaningful units by concatenative measures alone. This is not true for languages such as Hebrew and Arabic, where morphology is encoded in root-template patterns, or Malay and Georgian, where split affixes are common. We present SPLINTER, a pre-processing step which rearranges text into a linear form that better represents such nonconcatenative morphologies, enabling meaningful contiguous segments to be found by the tokenizer. We demonstrate SPLINTER's merit using both intrinsic measures evaluating token vocabularies in Hebrew, Arabic, and Malay; as well as on downstream tasks using BERT-architecture models trained for Hebrew.

Token-mixing multi-layer perceptron (MLP) models have shown competitive performance in computer vision tasks with a simple architecture and relatively small computational cost. Their success in maintaining computation efficiency is mainly attributed to avoiding the use of self-attention that is often computationally heavy, yet this is at the expense of not being able to mix tokens both globally and locally. In this paper, to exploit both global and local dependencies without self-attention, we present Mix-Shift-MLP (MS-MLP) which makes the size of the local receptive field used for mixing increase with respect to the amount of spatial shifting. In addition to conventional mixing and shifting techniques, MS-MLP mixes both neighboring and distant tokens from fine- to coarse-grained levels and then gathers them via a shifting operation. This directly contributes to the interactions between global and local tokens. Being simple to implement, MS-MLP achieves competitive performance in multiple vision benchmarks. For example, an MS-MLP with 85 million parameters achieves 83.8% top-1 classification accuracy on ImageNet-1K. Moreover, by combining MS-MLP with state-of-the-art Vision Transformers such as the Swin Transformer, we show MS-MLP achieves further improvements on three different model scales, e.g., by 0.5% on ImageNet-1K classification with Swin-B. The code is available at: https://github.com/JegZheng/MS-MLP.

One of the most striking findings in modern research on large language models (LLMs) is that scaling up compute during training leads to better results. However, less attention has been given to the benefits of scaling compute during inference. This survey focuses on these inference-time approaches. We explore three areas under a unified mathematical formalism: token-level generation algorithms, meta-generation algorithms, and efficient generation. Token-level generation algorithms, often called decoding algorithms, operate by sampling a single token at a time or constructing a token-level search space and then selecting an output. These methods typically assume access to a language model's logits, next-token distributions, or probability scores. Meta-generation algorithms work on partial or full sequences, incorporating domain knowledge, enabling backtracking, and integrating external information. Efficient generation methods aim to reduce token costs and improve the speed of generation. Our survey unifies perspectives from three research communities: traditional natural language processing, modern LLMs, and machine learning systems.

Large language models (LLMs) have shown remarkable performance in various natural language processing tasks. However, a primary constraint they face is the context limit, i.e., the maximum number of tokens they can process. Previous works have explored architectural changes and modifications in positional encoding to relax the constraint, but they often require expensive training or do not address the computational demands of self-attention. In this paper, we present Hierarchical cOntext MERging (HOMER), a new training-free scheme designed to overcome the limitations. HOMER uses a divide-and-conquer algorithm, dividing long inputs into manageable chunks. Each chunk is then processed collectively, employing a hierarchical strategy that merges adjacent chunks at progressive transformer layers. A token reduction technique precedes each merging, ensuring memory usage efficiency. We also propose an optimized computational order reducing the memory requirement to logarithmically scale with respect to input length, making it especially favorable for environments with tight memory restrictions. Our experiments demonstrate the proposed method's superior performance and memory efficiency, enabling the broader use of LLMs in contexts requiring extended context. Code is available at https://github.com/alinlab/HOMER.