Daily Papers

PCB routing is the task of connecting the nets of a board with copper traces under strict design rules, yet learning-based methods still lag behind rule-based routers. We introduce PCBWorld, an open-source engine-grounded PCB routing environment built on KiCad, an electronic design automation (EDA) engine. As a human engineer does, agents in PCBWorld interactively route a board through the engine's native operations, guided by its Design Rule Check (DRC) feedback. The environment supports both RL and tool-using LLM agents. Alongside the environment, PCBWorld-Bench provides three board datasets in the native .kicad_pcb format, two controllable synthetic generators and 679 real open-source boards. It scores any completed board with eight engine-checked evaluation metrics, regardless of the routing method. In our experiments, agents in PCBWorld consistently outperformed grid-action RL policies and open-loop LLM baselines, and an RL policy trained only on synthetic boards transferred zero-shot to real boards, approaching rule-based routers. PCBWorld and PCBWorld-Bench are available at https://github.com/LGAI-Research/PCBWorld.

Packaging has become a crucial process due to the paradigm shift of More than Moore. Addressing manufacturing and yield issues is a significant challenge for modern layout algorithms. We propose to use printed circuit board (PCB) placement as a benchmark for the packaging problem. A maximum-margin formulation is devised to improve the separation between nets. Our framework includes seed layout proposals, a coordinate descent-based procedure to optimize routability, and a mixed-integer linear programming method to legalize the layout. We perform an extensive study with 14 PCB designs and an open-source router. We show that the placements produced by NS-place improve routed wirelength by up to 25\%, reduce the number of vias by up to 50\%, and reduce the number of DRVs by 79\% compared to manual and wirelength-minimal placements.

Printed Circuit Board (PCB) schematic design plays an essential role in all areas of electronic industries. Unlike prior works that focus on digital or analog circuits alone, PCB design must handle heterogeneous digital, analog, and power signals while adhering to real-world IC packages and pin constraints. Automated PCB schematic design remains unexplored due to the scarcity of open-source data and the absence of simulation-based verification. We introduce PCBSchemaGen, the first training-free framework for PCB schematic design that comprises LLM agent and Constraint-guided synthesis. Our approach makes three contributions: 1. an LLM-based code generation paradigm with iterative feedback with domain-specific prompts. 2. a verification framework leveraging a real-world IC datasheet derived Knowledge Graph (KG) and Subgraph Isomorphism encoding pin-role semantics and topological constraints. 3. an extensive experiment on 23 PCB schematic tasks spanning digital, analog, and power domains. Results demonstrate that PCBSchemaGen significantly improves design accuracy and computational efficiency.

In recent years, significant progress has been made in the field of robotic reinforcement learning (RL), enabling methods that handle complex image observations, train in the real world, and incorporate auxiliary data, such as demonstrations and prior experience. However, despite these advances, robotic RL remains hard to use. It is acknowledged among practitioners that the particular implementation details of these algorithms are often just as important (if not more so) for performance as the choice of algorithm. We posit that a significant challenge to widespread adoption of robotic RL, as well as further development of robotic RL methods, is the comparative inaccessibility of such methods. To address this challenge, we developed a carefully implemented library containing a sample efficient off-policy deep RL method, together with methods for computing rewards and resetting the environment, a high-quality controller for a widely-adopted robot, and a number of challenging example tasks. We provide this library as a resource for the community, describe its design choices, and present experimental results. Perhaps surprisingly, we find that our implementation can achieve very efficient learning, acquiring policies for PCB board assembly, cable routing, and object relocation between 25 to 50 minutes of training per policy on average, improving over state-of-the-art results reported for similar tasks in the literature. These policies achieve perfect or near-perfect success rates, extreme robustness even under perturbations, and exhibit emergent recovery and correction behaviors. We hope that these promising results and our high-quality open-source implementation will provide a tool for the robotics community to facilitate further developments in robotic RL. Our code, documentation, and videos can be found at https://serl-robot.github.io/

The adoption of machine learning-based techniques for analog integrated circuit layout, unlike its digital counterpart, has been limited by the stringent requirements imposed by electric and problem-specific constraints, along with the interdependence of floorplanning and routing steps. In this work, we address a prevalent concern among layout engineers regarding the need for readily available routing-aware floorplanning solutions. To this extent, we develop an automatic floorplanning engine based on reinforcement learning and relational graph convolutional neural network specifically tailored to condition the floorplan generation towards more routable outcomes. A combination of increased grid resolution and precise pin information integration, along with a dynamic routing resource estimation technique, allows balancing routing and area efficiency, eventually meeting industrial standards. When analyzing the place and route effectiveness in a simulated environment, the proposed approach achieves a 13.8% reduction in dead space, a 40.6% reduction in wirelength and a 73.4% increase in routing success when compared to past learning-based state-of-the-art techniques.

Very Large Scale Integration (VLSI) global routing is an NP-hard combinatorial optimization problem requiring signal net assignment across capacity-constrained 3D grids while minimizing congestion, wirelength, and via transitions. Because traditional heuristics rely on static penalty schedules that fail on complex congestion topologies, we present AlphaRoute: a multi-objective adaptive search framework reformulating rip-up and reroute (R&R) into a dynamic optimization system. We introduce SHAP-based overflow decomposition to isolate per-net congestion, driving targeted subgraph extraction via 3D Dijkstra maze routing and an adaptive PathFinder policy. Crucially, AlphaRoute employs Large Language Models (LLMs) as semantic policy optimizers. Bounded by a deterministic knowledge graph, the LLMs interpret congestion metrics to dynamically adjust penalty parameters. Evaluated on ISPD 2025 benchmarks, AlphaRoute reduces overflow by 98.6% on MEMPOOL. On the constrained ARIANE design, we achieve an overflow of 146,109 (a 29.8x reduction in overflow over the state of the art), yielding a penalized score of S_orig = 0.0538 versus the State-of-the-art (SOTA) 1.780. These results demonstrate that superior algorithmic search geometry can overcome the latency of interpreted Python implementations.

Printed Circuit Boards are the foundation for the functioning of any electronic device, and therefore are an essential component for various industries such as automobile, communication, computation, etc. However, one of the challenges faced by the PCB manufacturers in the process of manufacturing of the PCBs is the faulty placement of its components including missing components. In the present scenario the infrastructure required to ensure adequate quality of the PCB requires a lot of time and effort. The authors present a novel solution for detecting missing components and classifying them in a resourceful manner. The presented algorithm focuses on pixel theory and object detection, which has been used in combination to optimize the results from the given dataset.

LLM routing has become a popular approach to improve the cost-quality trade-off of LLM services by dynamically selecting a model for each query. Recent work has explored a broad range of routing methods, including clustering-based routers, learned classifiers, pairwise ranking, and confidence-based approaches. Our extensive study of 21 routing methods across five benchmarks reveals a consistent phenomenon that we call the routing plateau: many methods, including kNN, achieve very similar accuracy and converge to a narrow performance range that remains far below the oracle router. Our investigation shows that the plateau is largely caused by a predictability bottleneck: current routers mainly learn global averaged model-performance trends rather than fine-grained query-specific routing signals. As a result, they solve overlapping easy queries but collectively fail on hard queries that require instance-specific routing decisions. We further study how to move beyond the plateau and find that larger training datasets, stronger encoders, and end-to-end fine-tuning can further improve routing accuracy. These findings characterize the common limits of current routing methods and provide insights and actionable directions for the community to build more effective routing systems.

3D field-programmable gate arrays (FPGAs) promise higher performance through vertical integration. However, existing placement tools, largely inherited from 2D frameworks, fail to capture the unique delay characteristics and optimization dynamics of 3D fabrics. We introduce a 3D FPGA placement flow that integrates partitioning-based initialization, adaptive cost scheduling, refined delay estimation, and a simulated annealing move set -- all targeted at 3D FPGA architecture. Together, these enhancements improve timing estimates and the exploration of layer assignments during placement. Compared to Verilog-To-Routing (VTR), our experiments show geometric-mean (max) critical-path delay reductions of ~3% (~7%), ~2% (~4%), ~3% (~8%), and ~6% (~18%) for four 3D architectures: 3D CB, 3D CB-O, 3D CB-I, and 3D SB, respectively. We also achieve geometric-mean (max) routed wirelength reductions of ~1% (~3%), ~2% (~8%), < 1% (~5%), and ~5% (~10%), respectively. Our work will be permissively open-sourced on GitHub.

Printed circuit board (PCB) schematic design defines nearly all electronic hardware, but it remains manual and expertise-intensive. While generative AI has advanced digital and analog IC design, PCB schematic generation from natural-language intent is largely unexplored. This paper presents SchGen, the first large language model that generates editable PCB schematics from natural-language requests. The key challenge lies in the lack of an LLM-suited representation and a large-scale dataset. Current schematic formats are dominated by verbose, tool-specific syntax and geometry-heavy descriptions, making them difficult to generate reliably. We introduce a semantically grounded code representation that encodes schematic editing primitives with relative placement and pin-name-based wiring, transforming a geometry-driven generation problem into a semantics-driven matching task amenable to LLMs. We further construct a large-scale dataset of PCB schematics paired with user prompts via a human-agent collaborative pipeline that converts open-source hardware designs into our representation. Experiments show that SchGen significantly outperforms alternative representations and even larger general-purpose LLMs on wire connectivity accuracy and functional correctness. Our results highlight the critical role of representation design in enabling generative models for complex hardware design tasks.

LLM routing matters most in long-horizon applications such as coding agents, deep research systems, and computer-use agents, where a single user request triggers many model calls. Routing each call to the cheapest sufficient model can cut costs without sacrificing quality, yet existing router benchmarks evaluate routers only on one-shot prompts. They never expose the router-visible prefix at an intermediate agent step, never test whether a cheaper replacement preserves downstream task success, and often rely on online LLM judges at evaluation time. We introduce TwinRouterBench, a step-level routing benchmark with two tracks. The static track provides 970 router-visible prefixes from 520 instances across SWE-bench, BFCL, mtRAG, QMSum, and PinchBench, each paired with an execution-verified target tier estimated under a released downgrade-and-cascade protocol; scoring is deterministic arithmetic over tier labels, trajectory membership, and token costs, with no online evaluator-side LLM judge. The dynamic track supplies a harness that runs routers on the full 500-case SWE-bench Verified suite; in this paper we report a 100-case held-out evaluation disjoint from the static SWE supervision split. At each LLM call the router selects a concrete model from a locked pool, and success is measured by official task resolution and realized API spend. The two tracks support fast offline iteration followed by end-to-end validation under live agent execution. Code and data are available at https://github.com/CommonstackAI/TwinRouterBench.

No single large language model (LLM) is optimal across all queries and budget constraints, making model routing essential for cost-effective deployment. Existing routers adopt diverse formulations and implementations, making fair comparison and extension difficult. We present a unified formulation of LLM routing as a sequential decision process characterized by five components: context encoders, model encoders, scoring functions, decision rules, and learning signals, covering single-turn, multi-turn, and personalized routing. Based on this formulation, we develop an automated pipeline for constructing routing supervision and evaluating routers jointly on response quality and inference cost. The resulting benchmark, xRouteBench, spans generic LLM, memory-augmented, vision, time-series, and personalized routing tasks. We further introduce LLMRouter, an open-source modular infrastructure with more than 16 representative routers. Our empirical study shows that learned routers outperform the strongest fixed-model baseline by 14.6% relatively, lightweight routers become more competitive under tight cost constraints, and user-conditioned routing consistently improves personalization.

Design flows use graph partitioning both as a precursor to place and route for single devices, and to divide netlists or task graphs among multiple devices. Partitioners have accommodated FPGA heterogeneity via multi-resource constraints, but have not yet exploited the corresponding ability to implement some computations in multiple ways (e.g., LUTs vs. DSP blocks), which could enable a superior solution. This paper introduces multi-personality graph partitioning, which incorporates aspects of resource mapping into partitioning. We present a modified multi-level KLFM partitioning algorithm that also performs heterogeneous resource mapping for nodes with multiple potential implementations (multiple personalities). We evaluate several variants of our multi-personality FPGA circuit partitioner using 21 circuits and benchmark graphs, and show that dynamic resource mapping improves cut size on average by 27% over static mapping for these circuits. We further show that it improves deviation from target resource utilizations by 50% over post-partitioning resource mapping.

We introduce directional routing, a lightweight mechanism that gives each transformer attention head learned suppression directions controlled by a shared router, at 3.9% parameter cost. We train a 433M-parameter model alongside an identical baseline in a single run, then trace the resulting circuits through mechanistic interpretability. Routing becomes the model's dominant computational pathway. Disabling it collapses factual recall to near-zero probability across all 8 test prompts and drops induction accuracy from 93.4% to 0.0%. Knocking out individual attention heads has negligible effect: the primary mover head's removal actually increases target probability, and induction heads retain 98.6% accuracy without their strongest member. The coordination mechanism is irreplaceable; the components it coordinates are not. The model also self-organizes, without explicit pressure, into two regimes: domain-adaptive routing in early layers and fixed syntactic pruning in late layers, where the least-varying layer is the most critical (+42.6 PPL when disabled). Routing reduces perplexity 31-56% relative to the baseline, though downstream multiple-choice benchmarks do not yet reflect these gains.

Printed Circuit Board (PCB) assurance in the optical domain is a crucial field of study. Though there are many existing PCB assurance methods using image processing, computer vision (CV), and machine learning (ML), the PCB field is complex and increasingly evolving so new techniques are required to overcome the emerging problems. Existing ML-based methods outperform traditional CV methods, however they often require more data, have low explainability, and can be difficult to adapt when a new technology arises. To overcome these challenges, CV methods can be used in tandem with ML methods. In particular, human-interpretable CV algorithms such as those that extract color, shape, and texture features increase PCB assurance explainability. This allows for incorporation of prior knowledge, which effectively reduce the number of trainable ML parameters and thus, the amount of data needed to achieve high accuracy when training or retraining an ML model. Hence, this study explores the benefits and limitations of a variety of common computer vision-based features for the task of PCB component detection using semantic data. Results of this study indicate that color features demonstrate promising performance for PCB component detection. The purpose of this paper is to facilitate collaboration between the hardware assurance, computer vision, and machine learning communities.

Pre-routing timing prediction has been recently studied for evaluating the quality of a candidate cell placement in chip design. It involves directly estimating the timing metrics for both pin-level (slack, slew) and edge-level (net delay, cell delay), without time-consuming routing. However, it often suffers from signal decay and error accumulation due to the long timing paths in large-scale industrial circuits. To address these challenges, we propose a two-stage approach. First, we propose global circuit training to pre-train a graph auto-encoder that learns the global graph embedding from circuit netlist. Second, we use a novel node updating scheme for message passing on GCN, following the topological sorting sequence of the learned graph embedding and circuit graph. This scheme residually models the local time delay between two adjacent pins in the updating sequence, and extracts the lookup table information inside each cell via a new attention mechanism. To handle large-scale circuits efficiently, we introduce an order preserving partition scheme that reduces memory consumption while maintaining the topological dependencies. Experiments on 21 real world circuits achieve a new SOTA R2 of 0.93 for slack prediction, which is significantly surpasses 0.59 by previous SOTA method. Code will be available at: https://github.com/Thinklab-SJTU/EDA-AI.

Multi-model routing has evolved from an engineering technique into essential infrastructure, yet existing work lacks a systematic, reproducible benchmark for evaluating vision-language models (VLMs). We present VL-RouterBench to assess the overall capability of VLM routing systems systematically. The benchmark is grounded in raw inference and scoring logs from VLMs and constructs quality and cost matrices over sample-model pairs. In scale, VL-RouterBench covers 14 datasets across 3 task groups, totaling 30,540 samples, and includes 15 open-source models and 2 API models, yielding 519,180 sample-model pairs and a total input-output token volume of 34,494,977. The evaluation protocol jointly measures average accuracy, average cost, and throughput, and builds a ranking score from the harmonic mean of normalized cost and accuracy to enable comparison across router configurations and cost budgets. On this benchmark, we evaluate 10 routing methods and baselines and observe a significant routability gain, while the best current routers still show a clear gap to the ideal Oracle, indicating considerable room for improvement in router architecture through finer visual cues and modeling of textual structure. We will open-source the complete data construction and evaluation toolchain to promote comparability, reproducibility, and practical deployment in multimodal routing research.

As the range of applications for Large Language Models (LLMs) continues to grow, the demand for effective serving solutions becomes increasingly critical. Despite the versatility of LLMs, no single model can optimally address all tasks and applications, particularly when balancing performance with cost. This limitation has led to the development of LLM routing systems, which combine the strengths of various models to overcome the constraints of individual LLMs. Yet, the absence of a standardized benchmark for evaluating the performance of LLM routers hinders progress in this area. To bridge this gap, we present RouterBench, a novel evaluation framework designed to systematically assess the efficacy of LLM routing systems, along with a comprehensive dataset comprising over 405k inference outcomes from representative LLMs to support the development of routing strategies. We further propose a theoretical framework for LLM routing, and deliver a comparative analysis of various routing approaches through RouterBench, highlighting their potentials and limitations within our evaluation framework. This work not only formalizes and advances the development of LLM routing systems but also sets a standard for their assessment, paving the way for more accessible and economically viable LLM deployments. The code and data are available at https://github.com/withmartian/routerbench.

Pre-routing slack prediction remains a critical area of research in Electronic Design Automation (EDA). Despite numerous machine learning-based approaches targeting this task, there is still a lack of a truly end-to-end framework that engineers can use to obtain TNS/WNS metrics from raw circuit data at the placement stage. Existing works have demonstrated effectiveness in Arrival Time (AT) prediction but lack a mechanism for Required Arrival Time (RAT) prediction, which is essential for slack prediction and obtaining TNS/WNS metrics. In this work, we propose E2ESlack, an end-to-end graph-based framework for pre-routing slack prediction. The framework includes a TimingParser that supports DEF, SDF and LIB files for feature extraction and graph construction, an arrival time prediction model and a fast RAT estimation module. To the best of our knowledge, this is the first work capable of predicting path-level slacks at the pre-routing stage. We perform extensive experiments and demonstrate that our proposed RAT estimation method outperforms the SOTA ML-based prediction method and also pre-routing STA tool. Additionally, the proposed E2ESlack framework achieves TNS/WNS values comparable to post-routing STA results while saving up to 23x runtime.

Sparse Mixture-of-Experts (MoE) architectures employ increasingly sophisticated routing mechanisms -- learned routers, multi-hop trajectories, token-dependent gating. We ask: does routing topology actually determine language modeling quality? We build a geometric MoE (ST-MoE) using cosine-similarity routing against learned centroids in a low-dimensional space (d_{space} = 64), requiring 80% fewer routing parameters than standard linear routers. Through 62 controlled experiments on WikiText-103 at 76--84M parameters trained to convergence (50K steps, 1.64B tokens), we find that routing topology does not determine asymptotic perplexity (PPL): five cosine-routing variants are statistically equivalent within a 1-PPL margin (Two One-Sided Tests [TOST], p < 0.05 for all 10 pairwise comparisons; 15 runs across 3 seeds, observed range 33.93--34.72). The finding extends to hash, random-fixed, and top-1 routing (single-seed; graceful 1.1--2.2 PPL degradation) and replicates on OpenWebText (0.03 PPL gap, 6 runs, 3 seeds each). A standard linear router with 5.3times more routing parameters reaches PPL 32.76, but iso-parameter cosine routing closes 67% of this gap -- the true mechanism advantage is sim1.2%. The mechanistic explanation is convergent redundancy: multi-hop updates are collinear (cos(Δh_0, Δh_1) = 0.805), implementing magnitude amplification rather than compositional reasoning; a single learnable scalar replicates multi-hop performance. As a practical payoff, zero-shot relative-norm halting saves 25% of MoE FLOPs at +0.12% PPL. Expert-level specialization and causal controllability -- which coexist with topology-level equifinality -- are explored in a companion paper.

As large language models (LLMs) grow in scale and specialization, routing--selecting the best model for a given input--has become essential for efficient and effective deployment. While recent methods rely on complex learned routing strategies, their dependence on disparate training data and evaluation setups makes comparison and generalization difficult. In this work, we revisit LLM routing through the lens of simplicity. We show that a well-tuned k-Nearest Neighbors (kNN) approach not only matches but often outperforms state-of-the-art learned routers across diverse tasks. To support systematic evaluation, we introduce a suite of standardized routing benchmarks spanning instruction-following, question-answering, and reasoning tasks, as well as the first multi-modal routing dataset involving visual inputs. Our findings reveal that the locality properties of model performance in embedding space enable simple non-parametric methods to achieve strong routing decisions with lower sample complexity than parametric approaches. This challenges the prevailing trend toward sophisticated architectures and highlights the importance of thoroughly evaluating simple baselines before investing in complex solutions. To support reproducibility and further exploration, we will release all benchmarks and code upon publication.

As a telecom provider, our company has a critical mission to maintain telecom services even during power outages. To accomplish the mission, it is essential to maintain the power of the telecom base stations. Here we consider a solution where electric vehicles (EVs) directly supply power to base stations by traveling to their locations. The goal is to find EV routes that minimize both the total travel distance of all EVs and the number of downed base stations. In this paper, we formulate this routing problem as a new variant of the Electric Vehicle Routing Problem (EVRP) and propose a solver that combines a rule-based vehicle selector and a reinforcement learning (RL)-based node selector. The rule of the vehicle selector ensures the exact environmental states when the selected EV starts to move. In addition, the node selection by the RL model enables fast route generation, which is critical in emergencies. We evaluate our solver on both synthetic datasets and real datasets. The results show that our solver outperforms baselines in terms of the objective value and computation time. Moreover, we analyze the generalization and scalability of our solver, demonstrating the capability toward unseen settings and large-scale problems. Check also our project page: https://ntt-dkiku.github.io/rl-evrpeps.

LLM routing aims to achieve a favorable quality--cost trade-off by dynamically assigning easy queries to smaller models and harder queries to stronger ones. However, across both unimodal and multimodal settings, we uncover a pervasive yet underexplored failure mode in existing routers: as the user's cost budget increases, routers systematically default to the most capable and most expensive model even when cheaper models already suffice. As a result, current routers under-utilize small models, wasting computation and monetary cost and undermining the core promise of routing; we term this phenomenon routing collapse. We attribute routing collapse to an objective--decision mismatch: many routers are trained to predict scalar performance scores, whereas routing decisions ultimately depend on discrete comparisons among candidate models. Consequently, small prediction errors can flip relative orderings and trigger suboptimal selections. To bridge this gap, we propose EquiRouter, a decision-aware router that directly learns model rankings, restoring the role of smaller models and mitigating routing collapse. On RouterBench, EquiRouter reduces cost by about 17\% at GPT-4-level performance compared to the strongest prior router. Our code is available at https://github.com/AIGNLAI/EquiRouter.

Real-world users typically have access to multiple Large Language Models (LLMs) from different providers, and these LLMs often excel at distinct domains, yet none dominate all. Consequently, routing each task to the most suitable model becomes critical for both performance and cost. Existing routers treat this as a static, one-off classification problem. However, we identify the performance bottleneck for these routers as information deficit: simply augmenting a vanilla LLM router with performance statistics at the task-dimension level yields a 15.3% relative gain, surpassing a heuristic router built on the same dimension-level priors. Motivated by this finding, we propose Agent-as-a-Router, a framework that formalizes routing as a C-A-F loop (Context->Action->Feedback->Context). It closes the information gap by accumulating execution-grounded experience during deployment. We instantiate this framework as ACRouter, composed of an Orchestrator, a Verifier, a Memory module, and introduce CodeRouterBench, an evaluation environment comprising ~10K task instances with verified scores from 8 frontier LLMs, enabling regret-based router comparison on streaming tasks. Experiments show that ACRouter achieves the lowest cumulative regret on in-distribution tasks and generalizes to out-of-distribution agentic-programming tasks, demonstrating that our routing framework actively closes the information gap. Codes and benchmarks are released at https://github.com/LanceZPF/agent-as-a-router.

As the large language model (LLM) ecosystem expands, individual models exhibit varying capabilities across queries, benchmarks, and domains, motivating the development of LLM routing. While prior work has largely focused on router mechanism design, LLM profiles, which capture model capabilities, remain underexplored. In this work, we ask: How does LLM profile design affect routing performance across different routers? Addressing this question helps clarify the role of profiles in routing, disentangle profile design from router design, and enable fairer comparison and more principled development of routing systems. To this end, we view LLM profiling as a structured information integration problem over heterogeneous interaction histories. We develop a general design space of LLM profiles, named RouteProfile, along four key dimensions: organizational form, representation type, aggregation depth, and learning configuration. Through systematic evaluation across three representative routers under both standard and new-LLM generalization settings, we show that: (1) structured profiles consistently outperform flat ones; (2) query-level signals are more reliable than coarse domain-level signals; and (3) generalization to newly introduced models benefits most from structured profiles under trainable configurations. Overall, our work highlights LLM profile design as an important direction for future routing research.

Large language models' significant advances in capabilities are accompanied by significant increases in inference costs. Model routing is a simple technique for reducing inference cost, wherein one maintains a pool of candidate LLMs, and learns to route each prompt to the smallest feasible LLM. Existing works focus on learning a router for a fixed pool of LLMs. In this paper, we consider the problem of dynamic routing, where new, previously unobserved LLMs are available at test time. We propose a new approach to this problem that relies on representing each LLM as a feature vector, derived based on predictions on a set of representative prompts. Based on this, we detail two effective strategies, relying on cluster-based routing and a learned cluster map respectively. We prove that these strategies are estimates of a theoretically optimal routing rule, and provide an excess risk bound to quantify their errors. Experiments on a range of public benchmarks show the effectiveness of the proposed strategies in routing amongst more than 30 unseen LLMs.

To coupe with the difficulties in the process of inspection and classification of defects in Printed Circuit Board (PCB), other researchers have proposed many methods. However, few of them published their dataset before, which hindered the introduction and comparison of new methods. In this paper, we published a synthesized PCB dataset containing 1386 images with 6 kinds of defects for the use of detection, classification and registration tasks. Besides, we proposed a reference based method to inspect and trained an end-to-end convolutional neural network to classify the defects. Unlike conventional approaches that require pixel-by-pixel processing, our method firstly locate the defects and then classify them by neural networks, which shows superior performance on our dataset.

Outsourced printed circuit board (PCB) fabrication necessitates increased hardware assurance capabilities. Several assurance techniques based on automated optical inspection (AOI) have been proposed that leverage PCB images acquired using digital cameras. We review state-of-the-art AOI techniques and observe a strong, rapid trend toward machine learning (ML) solutions. These require significant amounts of labeled ground truth data, which is lacking in the publicly available PCB data space. We contribute the FICS PCB Image Collection (FPIC) dataset to address this need. Additionally, we outline new hardware security methodologies enabled by our data set.

Large language model (LLM) routing assigns each query to the most suitable model from an ensemble. We introduce LLMRouterBench, a large-scale benchmark and unified framework for LLM routing. It comprises over 400K instances from 21 datasets and 33 models. Moreover, it provides comprehensive metrics for both performance-oriented routing and performance-cost trade-off routing, and integrates 10 representative routing baselines. Using LLMRouterBench, we systematically re-evaluate the field. While confirming strong model complementarity-the central premise of LLM routing-we find that many routing methods exhibit similar performance under unified evaluation, and several recent approaches, including commercial routers, fail to reliably outperform a simple baseline. Meanwhile, a substantial gap remains to the Oracle, driven primarily by persistent model-recall failures. We further show that backbone embedding models have limited impact, that larger ensembles exhibit diminishing returns compared to careful model curation, and that the benchmark also enables latency-aware analysis. All code and data are available at https://github.com/ynulihao/LLMRouterBench.

Mixture-of-Experts (MoE) LLMs rely on sparse, router-driven expert activation, yet how safety alignment interacts with routed expert specialization remains underexplored. A common intuition is that safety behavior may be controlled by routing harmful requests to distinct refusal-oriented experts. In this work, we provide empirical evidence for a different picture: routing patterns in aligned MoE LLMs are largely topic-driven, while safety behavior can be altered with little change to the model's intrinsic routing path. Motivated by this observation, we present RASET (Router-Agnostic Safety-Critical Expert Tuning), a red-teaming framework that probes safety enforcement that is localized in a small subset of experts while preserving the model's intrinsic routing behavior. RASET identifies safety-critical experts via a contrastive routing-sensitivity criterion and applies parameter-efficient tuning only to the selected experts, minimizing semantic disruption relative to router-steering interventions. Across five open-weight MoE backbones, RASET achieves high-quality safety-bypass yield (50.5% average ASR_{hq}, +37.6 points over the strongest baseline). These results reveal a distinct MoE safety risk, highlighting the need for expert-aware alignment mechanisms.

As LLMs proliferate with diverse capabilities and costs, LLM routing has emerged by learning to predict each LLM's quality and cost for a given query, then selecting the one with high quality and low cost. However, existing routers implicitly assume a single fixed quality and cost per LLM for each query, ignoring that the same LLM's quality varies with its output length. This causes routers to exclude powerful LLMs when their estimated cost exceeds the budget, missing the opportunity that these LLMs could still deliver high quality at reduced cost with shorter outputs. To address this, we introduce R2-Router, which treats output length budget as a controllable variable and jointly selects the best LLM and length budget, enforcing the budget via length-constrained instructions. This enables R2-Router to discover that a powerful LLM with constrained output can outperform a weaker LLM at comparable cost-efficient configurations invisible to prior methods. Together with the router framework, we construct R2-Bench, the first routing dataset capturing LLM behavior across diverse output length budgets. Experiments show that R2-Router achieves state-of-the-art performance at 4-5x lower cost compared with existing routers. This work opens a new direction: routing as reasoning, where routers evolve from reactive selectors to deliberate reasoners that explore which LLM to use and at what cost budget.

Routing to select large language models (LLMs) with different cost-quality trade-offs has become a fundamental deployment feature of enterprise AI. Existing routers, primarily make independent routing decisions for each LLM call. However, agentic applications execute as long-horizon workflows whose quality is determined only by a delayed, task-level outcome. This mismatch prevents per-call routers from correctly attributing feedback to individual routing decisions. Towards mitigating this, we present TRACE-Router, a task-level routing framework that aligns routing with the unit of supervision. TRACE-Router assigns each task to a model once at admission using a contextual bandit, pins all subsequent LLM calls to the selected backend, and updates its policy using the task's terminal reward, jointly accounting for accuracy and latency. By leveraging delayed task feedback, TRACE-Router learns routing policies that adapt to the workload while avoiding explicit task-complexity estimation. Across three agentic benchmarks, TRACE-Router consistently improves the accuracy-latency trade-off, achieving non-dominated Pareto frontier points. On tau2-Bench, it outperforms latency-matched interpolation between individual models by 7-8 accuracy points, while on Terminal-Bench it achieves 7.1 higher accuracy points than the strongest single model baseline with 36% lower latency.

Inventory Routing Problem (IRP) is a crucial challenge in supply chain management as it involves optimizing efficient route selection while considering the uncertainty of inventory demand planning. To solve IRPs, usually a two-stage approach is employed, where demand is predicted using machine learning techniques first, and then an optimization algorithm is used to minimize routing costs. Our experiment shows machine learning models fall short of achieving perfect accuracy because inventory levels are influenced by the dynamic business environment, which, in turn, affects the optimization problem in the next stage, resulting in sub-optimal decisions. In this paper, we formulate and propose a decision-focused learning-based approach to solving real-world IRPs. This approach directly integrates inventory prediction and routing optimization within an end-to-end system potentially ensuring a robust supply chain strategy.

Modern agentic workflows decompose complex tasks into specialized subtasks and route them to diverse models to minimize cost without sacrificing quality. However, current routing architectures focus exclusively on performance optimization, leaving underlying trade-offs between model capability and cost unrecorded. Without clear rationale, developers cannot distinguish between intelligent efficiency -- using specialized models for appropriate tasks -- and latent failures caused by budget-driven model selection. We present Topaz, a framework that introduces formal auditability to agentic routing. Topaz replaces silent model assignments with an inherently interpretable router that incorporates three components: (i) skill-based profiling that synthesizes performance across diverse benchmarks into granular capability profiles (ii) fully traceable routing algorithms that utilize budget-based and multi-objective optimization to produce clear traces of how skill-match scores were weighed against costs, and (iii) developer-facing explanations that translate these traces into natural language, allowing users to audit system logic and iteratively tune the cost-quality tradeoff. By making routing decisions interpretable, Topaz enables users to understand, trust, and meaningfully steer routed agentic systems.

Low-rank adapters (LoRAs) are a parameter-efficient finetuning technique that injects trainable low-rank matrices into pretrained models to adapt them to new tasks. Mixture-of-LoRAs models expand neural networks efficiently by routing each layer input to a small subset of specialized LoRAs of the layer. Existing Mixture-of-LoRAs routers assign a learned routing weight to each LoRA to enable end-to-end training of the router. Despite their empirical promise, we observe that the routing weights are typically extremely imbalanced across LoRAs in practice, where only one or two LoRAs often dominate the routing weights. This essentially limits the number of effective LoRAs and thus severely hinders the expressive power of existing Mixture-of-LoRAs models. In this work, we attribute this weakness to the nature of learnable routing weights and rethink the fundamental design of the router. To address this critical issue, we propose a new router designed that we call Reinforcement Routing for Mixture-of-LoRAs (ReMix). Our key idea is using non-learnable routing weights to ensure all active LoRAs to be equally effective, with no LoRA dominating the routing weights. However, our routers cannot be trained directly via gradient descent due to our non-learnable routing weights. Hence, we further propose an unbiased gradient estimator for the router by employing the reinforce leave-one-out (RLOO) technique, where we regard the supervision loss as the reward and the router as the policy in reinforcement learning. Our gradient estimator also enables to scale up training compute to boost the predictive performance of our ReMix. Extensive experiments demonstrate that our proposed ReMix significantly outperform state-of-the-art parameter-efficient finetuning methods under a comparable number of activated parameters.

Large Language Model (LLM)-driven Multi-Agent Systems (MAS) have demonstrated strong capability in complex reasoning and tool use, and heterogeneous agent pools further broaden the quality--cost trade-off space. Despite these advances, real-world deployment is often constrained by high inference cost, latency, and limited transparency, which hinders scalable and efficient routing. Existing routing strategies typically rely on expensive LLM-based selectors or static policies, and offer limited controllability for semantic-aware routing under dynamic loads and mixed intents, often resulting in unstable performance and inefficient resource utilization. To address these limitations, we propose AMRO-S, an efficient and interpretable routing framework for Multi-Agent Systems (MAS). AMRO-S models MAS routing as a semantic-conditioned path selection problem, enhancing routing performance through three key mechanisms: First, it leverages a supervised fine-tuned (SFT) small language model for intent inference, providing a low-overhead semantic interface for each query; second, it decomposes routing memory into task-specific pheromone specialists, reducing cross-task interference and optimizing path selection under mixed workloads; finally, it employs a quality-gated asynchronous update mechanism to decouple inference from learning, optimizing routing without increasing latency. Extensive experiments on five public benchmarks and high-concurrency stress tests demonstrate that AMRO-S consistently improves the quality--cost trade-off over strong routing baselines, while providing traceable routing evidence through structured pheromone patterns.

The usage of electronic devices increases, and becomes predominant in most aspects of life. Surface Mount Technology (SMT) is the most common industrial method for manufacturing electric devices in which electrical components are mounted directly onto the surface of a Printed Circuit Board (PCB). Although the expansion of electronic devices affects our lives in a productive way, failures or defects in the manufacturing procedure of those devices might also be counterproductive and even harmful in some cases. It is therefore desired and sometimes crucial to ensure zero-defect quality in electronic devices and their production. While traditional Image Processing (IP) techniques are not sufficient to produce a complete solution, other promising methods like Deep Learning (DL) might also be challenging for PCB inspection, mainly because such methods require big adequate datasets which are missing, not available or not updated in the rapidly growing field of PCBs. Thus, PCB inspection is conventionally performed manually by human experts. Unsupervised Learning (UL) methods may potentially be suitable for PCB inspection, having learning capabilities on the one hand, while not relying on large datasets on the other. In this paper, we introduce ChangeChip, an automated and integrated change detection system for defect detection in PCBs, from soldering defects to missing or misaligned electronic elements, based on Computer Vision (CV) and UL. We achieve good quality defect detection by applying an unsupervised change detection between images of a golden PCB (reference) and the inspected PCB under various setting. In this work, we also present CD-PCB, a synthesized labeled dataset of 20 pairs of PCB images for evaluation of defect detection algorithms.

Sparsely activated neural networks with conditional computation learn to route their inputs through different "expert" subnetworks, providing a form of modularity that densely activated models lack. Despite their possible benefits, models with learned routing often underperform their parameter-matched densely activated counterparts as well as models that use non-learned heuristic routing strategies. In this paper, we hypothesize that these shortcomings stem from the gradient estimation techniques used to train sparsely activated models that use non-differentiable discrete routing decisions. To address this issue, we introduce Soft Merging of Experts with Adaptive Routing (SMEAR), which avoids discrete routing by using a single "merged" expert constructed via a weighted average of all of the experts' parameters. By routing activations through a single merged expert, SMEAR does not incur a significant increase in computational costs and enables standard gradient-based training. We empirically validate that models using SMEAR outperform models that route based on metadata or learn sparse routing through gradient estimation. Furthermore, we provide qualitative analysis demonstrating that the experts learned via SMEAR exhibit a significant amount of specialization. All of the code used in our experiments is publicly available.

There can be numerous electronic components on a given PCB, making the task of visual inspection to detect defects very time-consuming and prone to error, especially at scale. There has thus been significant interest in automatic PCB component detection, particularly leveraging deep learning. However, deep neural networks typically require high computational resources, possibly limiting their feasibility in real-world use cases in manufacturing, which often involve high-volume and high-throughput detection with constrained edge computing resource availability. As a result of an exploration of efficient deep neural network architectures for this use case, we introduce PCBDet, an attention condenser network design that provides state-of-the-art inference throughput while achieving superior PCB component detection performance compared to other state-of-the-art efficient architecture designs. Experimental results show that PCBDet can achieve up to 2times inference speed-up on an ARM Cortex A72 processor when compared to an EfficientNet-based design while achieving sim2-4\% higher mAP on the FICS-PCB benchmark dataset.

This paper proposes a novel admission and routing scheme which takes into account arbitrarily assigned priorities for network flows. The presented approach leverages the centralized Software Defined Networking (SDN) capabilities in order to do so. Exact and heuristic approaches to the stated Priority Flow Admission and Routing (PFAR) problem are provided. The exact approach which provides an optimal solution is based on Integer Linear Programming (ILP). Given the potentially long running time required to find an exact and optimal solution, a heuristic approach is proposed; this approach is based on Genetic Algorithms (GAs). In order to effectively estimate the performance of the proposed approaches, a simulator that is capable of generating semi-random network topologies and flows has been developed. Experimental results for large problem instances (up 50 network nodes and thousands of network flows), show that: i) an optimal solution can be often found in few seconds (even milliseconds), and ii) the heuristic approach yields close-to-optimal solutions (approximately 95\% of the optimal) in a fixed amount of time; these experimental results demonstrate the pertinence of the proposed approaches.

We present RouteJudge, an online pairwise preference evaluation framework for LLM routing systems, with a public platform available at https://routejudge.cn. Different from model-level response evaluation, RouteJudge focuses on router-level decision quality. For each user query, multiple routing strategies independently recommend candidate models under the same model pool and budget constraints. The selected model responses are then presented to users through anonymous pairwise comparisons, and the resulting user preferences are attributed back to the routing strategies behind the compared responses. Each evaluation record stores the query, routing decisions, model responses, preference labels, cost, latency, and task metadata, enabling preference-aware, cost-aware, and task-conditioned analysis of LLM routers. To support the continuous expansion of routing methods in RouteJudge, we further release ORBIT (Optimal Routing and Budgeted Inference Toolbox), a modular and extensible toolbox that standardizes the end-to-end workflow of LLM routing. ORBIT provides unified interfaces for benchmark loading, query representation, router implementation, budget-aware evaluation, and method comparison, allowing researchers to develop and evaluate routing algorithms under consistent protocols. It also serves as the submission and integration layer for RouteJudge: researchers can implement routing methods within ORBIT, validate them on existing routing benchmarks, and submit compatible routers for online preference-based evaluation. The code of ORBIT is available at https://github.com/LAMDA-Model-Reuse/ORBIT.

Large Language Models (LLM)-based systems, i.e. interconnected elements that include an LLM as a central component (e.g., conversational agents), are typically monolithic static architectures that rely on a single LLM for all user queries. However, they often require different preprocessing strategies, levels of reasoning, or knowledge. Generalist LLMs (i.e. GPT-4), trained on very large multi-topic corpora, can perform well in a variety of tasks. However, they require significant financial, energy, and hardware resources that may not be justified for basic tasks. This implies potentially investing in unnecessary costs for a given query. To overcome this problem, a routing mechanism routes user queries to the most suitable components, such as smaller LLMs or experts in specific topics. This approach may improve response quality while minimising costs. Routing can be expanded to other components of the conversational agent architecture, such as the selection of optimal embedding strategies. This paper explores key considerations for integrating routing into LLM-based systems, focusing on resource management, cost definition, and strategy selection. Our main contributions include a formalisation of the problem, a novel taxonomy of existing approaches emphasising relevance and resource efficiency, and a comparative analysis of these strategies in relation to industry practices. Finally, we identify critical challenges and directions for future research.

Multi-Agent Systems(MAS) have become a powerful paradigm for building high performance intelligent applications. Within these systems, the router responsible for determining which expert agents should handle a given query plays a crucial role in overall performance. Existing routing strategies generally fall into two categories: performance routing, which balances latency and cost across models of different sizes, and task routing, which assigns queries to domain-specific experts to improve accuracy. In real-world enterprise applications, task routing is more suitable; however, most existing approaches rely on static single-label decisions, which introduce two major limitations: (i) difficulty in seamlessly integrating new agents as business domains expand, and (ii) routing conflicts caused by overlapping agent capabilities, ultimately degrading accuracy and robustness.To address these challenges, we propose TCAndon-Router(TCAR): an adaptive reasoning router for multi-agent collaboration. Unlike traditional routers, TCAR supports dynamic agent onboarding and first generates a natural-language reasoning chain before predicting a set of candidate agents capable of handling the query. In addition, we design a collaborative execution pipeline in which selected agents independently produce responses, which are then aggregated and refined into a single high-quality response by a dedicated Refining Agent.Experiments on public datasets and real enterprise data demonstrate that TCAR significantly improves routing accuracy, reduces routing conflicts, and remains robust in ambiguous scenarios. We have released TCAR at https://huggingface.co/tencent/TCAndon-Router to support future research on explainable and collaborative multi-agent routing.

This paper discusses the system architecture design and deployment of non-stationary multi-armed bandit approaches to determine a near-optimal payment routing policy based on the recent history of transactions. We propose a Routing Service architecture using a novel Ray-based implementation for optimally scaling bandit-based payment routing to over 10,000 transactions per second, adhering to the system design requirements and ecosystem constraints with Payment Card Industry Data Security Standard (PCI DSS). We first evaluate the effectiveness of multiple bandit-based payment routing algorithms on a custom simulator to benchmark multiple non-stationary bandit approaches and identify the best hyperparameters. We then conducted live experiments on the payment transaction system on a fantasy sports platform Dream11. In the live experiments, we demonstrated that our non-stationary bandit-based algorithm consistently improves the success rate of transactions by 0.92% compared to the traditional rule-based methods over one month.

Large Language Model (LLM) routing is a pivotal technique for navigating a diverse landscape of LLMs, aiming to select the best-performing LLMs tailored to the domains of user queries, while managing computational resources. However, current routing approaches often face limitations in scalability when dealing with a large pool of specialized LLMs, or in their adaptability to extending model scope and evolving capability domains. To overcome those challenges, we propose InferenceDynamics, a flexible and scalable multi-dimensional routing framework by modeling the capability and knowledge of models. We operate it on our comprehensive dataset RouteMix, and demonstrate its effectiveness and generalizability in group-level routing using modern benchmarks including MMLU-Pro, GPQA, BigGenBench, and LiveBench, showcasing its ability to identify and leverage top-performing models for given tasks, leading to superior outcomes with efficient resource utilization. The broader adoption of Inference Dynamics can empower users to harness the full specialized potential of the LLM ecosystem, and our code will be made publicly available to encourage further research.

Routing large language models (LLMs) is a new paradigm that uses a router to recommend the best LLM from a pool of candidates for a given input. In this paper, our comprehensive analysis with more than 8,500 LLMs reveals a novel model-level scaling up phenomenon in Routing LLMs, i.e., a capable router can significantly enhance the performance of this paradigm as the number of candidates increases. This improvement can even surpass the performance of the best single model in the pool and many existing strong LLMs, confirming it a highly promising paradigm. However, the lack of comprehensive and open-source benchmarks for Routing LLMs has hindered the development of routers. In this paper, we introduce RouterEval, a benchmark tailored for router research, which includes over 200,000,000 performance records for 12 popular LLM evaluations across various areas such as commonsense reasoning, semantic understanding, etc., based on over 8,500 various LLMs. Using RouterEval, extensive evaluations of existing Routing LLM methods reveal that most still have significant room for improvement. See https://github.com/MilkThink-Lab/RouterEval for all data, code and tutorial.

Tool-using LLM agents face a reliability-cost tradeoff: routing every decision through the LLM improves correctness but incurs high latency and inference cost, while pre-coded workflow graphs reduce cost but become brittle under unanticipated compound tool failures. We present Self-Healing Router, a fault-tolerant orchestration architecture that treats most agent control-flow decisions as routing rather than reasoning. The system combines (i) parallel health monitors that assign priority scores to runtime conditions such as tool outages and risk signals, and (ii) a cost-weighted tool graph where Dijkstra's algorithm performs deterministic shortest-path routing. When a tool fails mid-execution, its edges are reweighted to infinity and the path is recomputed -- yielding automatic recovery without invoking the LLM. The LLM is reserved exclusively for cases where no feasible path exists, enabling goal demotion or escalation. Prior graph-based tool-use systems (ControlLLM, ToolNet, NaviAgent) focus on tool selection and planning; our contribution is runtime fault tolerance with deterministic recovery and binary observability -- every failure is either a logged reroute or an explicit escalation, never a silent skip. Across 19 scenarios spanning three graph topologies (linear pipeline, dependency DAG, parallel fan-out), Self-Healing Router matches ReAct's correctness while reducing control-plane LLM calls by 93% (9 vs 123 aggregate) and eliminating the silent-failure cases observed in a well-engineered static workflow baseline under compound failures.

The rapid growth of large language models (LLMs) with diverse capabilities, costs, and domains has created a critical need for intelligent model selection at inference time. While smaller models suffice for routine queries, complex tasks demand more capable models. However, static model deployment does not account for the complexity and domain of incoming queries, leading to suboptimal performance and increased costs. Dynamic routing systems that adaptively select models based on query characteristics have emerged as a solution to this challenge. We provide a systematic analysis of state-of-the-art multi-LLM routing and cascading approaches. In contrast to mixture-of-experts architectures, which route within a single model, we study routing across multiple independently trained LLMs. We cover diverse routing paradigms, including query difficulty, human preferences, clustering, uncertainty quantification, reinforcement learning, multimodality, and cascading. For each paradigm, we analyze representative methods and examine key trade-offs. Beyond taxonomy, we introduce a conceptual framework that characterizes routing systems along three dimensions: when decisions are made, what information is used, and how they are computed. This perspective highlights that practical systems are often compositional, integrating multiple paradigms under operational constraints. Our analysis demonstrates that effective multi-LLM routing requires balancing competing objectives. Choosing the optimal routing strategy depends on deployment and computational constraints. Well-designed routing systems can outperform even the most powerful individual models by strategically leveraging specialized capabilities across models while maximizing efficiency gains. Meanwhile, open challenges remain in developing routing mechanisms that generalize across diverse architectures, modalities, and applications.

VRP (Vehicle Routing Problem) is an NP hard problem, and it has attracted a lot of research interest. In contexts where vehicles have limited carrying capacity, such as volume and weight but needed to deliver items at various locations. Initially before creating a route, each vehicle needs a group of delivery points that are not exceeding their maximum capacity. Drivers tend to deliver only to certain areas. Cluster-based is one of the approaches to give a basis for generating tighter routes. In this paper we propose new algorithms for producing such clusters/groups that do not exceed vehicles maximum capacity. Our basic assumptions are each vehicle originates from a depot, delivers the items to the customers and returns to the depot, also the vehicles are homogeneous. This methods are able to compact sub-areas in each cluster. Computational results demonstrate the effectiveness of our new procedures, which are able to assist users to plan service territories and vehicle routes more efficiently.

For pre-training of MoE (Mixture-of-Experts) models, one of the main issues is unbalanced expert loads, which may cause routing collapse or increased computational overhead. Existing methods contain the Loss-Controlled method and the Loss-Free method, where both the unbalanced degrees at first several training steps are still high and decrease slowly. In this work, we propose BIP-Based Balancing, an expert load balancing algorithm based on binary integer programming (BIP). The algorithm maintains an additional vector q on each MoE layer that can help change the top-K order of s by solving a binary integer programming with very small time costs. We implement the algorithm on two MoE language models: 16-expert (0.3B) and 64-expert (1.1B). The experimental results show that on both models comparing with the Loss-Controlled method and the Loss-Free method, our algorithm trains models with the lowest perplexities, while saves at least 13% of pre-training time compared with the Loss-Controlled method. Within our current knowledge, this is the first routing algorithm that achieves maintaining load balance status on every expert in every MoE layer from the first step to the last step during the whole pre-training process, while the trained MoE models also perform well. The code material of this work is available at https://github.com/sunyuanLLM/bip_routing_algorithm.

Large language models (LLMs) are increasingly used in applications where LLM inputs may span many different tasks. Recent work has found that the choice of LLM is consequential, and different LLMs may be good for different input samples. Prior approaches have thus explored how engineers might select an LLM to use for each sample (i.e. routing). While existing routing methods mostly require training auxiliary models on human-annotated data, our work explores whether it is possible to perform unsupervised routing. We propose Smoothie, a weak supervision-inspired routing approach that requires no labeled data. Given a set of outputs from different LLMs, Smoothie constructs a latent variable graphical model over embedding representations of observable LLM outputs and unknown "true" outputs. Using this graphical model, we estimate sample-dependent quality scores for each LLM, and route each sample to the LLM with the highest corresponding score. We find that Smoothie's LLM quality-scores correlate with ground-truth model quality (correctly identifying the optimal model on 9/14 tasks), and that Smoothie outperforms baselines for routing by up to 10 points accuracy.

With the rapid proliferation of large language models (LLMs) -- each optimized for different strengths, style, or latency/cost profile -- routing has become an essential technique to operationalize the use of different models. However, existing LLM routing approaches are limited in two key ways: they evaluate performance using benchmarks that often fail to capture human preferences driven by subjective evaluation criteria, and they typically select from a limited pool of models. In this work, we propose a preference-aligned routing framework that guides model selection by matching queries to user-defined domains (e.g., travel) or action types (e.g., image editing) -- offering a practical mechanism to encode preferences in routing decisions. Specifically, we introduce Arch-Router, a compact 1.5B model that learns to map queries to domain-action preferences for model routing decisions. Our approach also supports seamlessly adding new models for routing without requiring retraining or architectural modifications. Experiments on conversational datasets demonstrate that our approach achieves state-of-the-art (SOTA) results in matching queries with human preferences, outperforming top proprietary models. Our approach captures subjective evaluation criteria and makes routing decisions more transparent and flexible. Our model is available at: https://huggingface.co/katanemo/Arch-Router-1.5B.

Large Language Models (LLMs) have achieved remarkable performance in Machine Translation (MT), but deploying them at scale remains prohibitively expensive. A widely adopted remedy is the hybrid system paradigm, which balances cost and quality by serving most requests with a small model and selectively routing a fraction to a large model. However, existing routing strategies often rely on heuristics, external predictors, or absolute quality estimation, which fail to capture whether the large model actually provides a worthwhile improvement over the small one. In this paper, we formulate routing as a budget allocation problem and identify marginal gain, i.e., the large model's improvement over the small model, as the optimal signal for budgeted decisions. Building on this, we propose RouteLMT (routing for LLM-based MT), an efficient in-model router that predicts this expected gain by probing the small translators prompt-token representation, without requiring external models or hypothesis decoding. Extensive experiments demonstrate that our RouteLMT outperforms heuristics, quality/difficulty estimation baselines, achieving a superior quality-budget Pareto frontier. Furthermore, we analyze regression risks and show that a simple guarded variant can mitigate severe quality losses.

Mixture-of-Experts (MoE) layers increase model capacity by activating only a small subset of experts per token, and typically rely on a learned router to map hidden states to expert assignments. In this work, we ask whether a dedicated learned router is strictly necessary in the MoE settings we study. We propose Self-Routing, a parameter-free routing mechanism that uses a designated subspace of the token hidden state directly as expert logits, eliminating the router projection entirely while leaving the rest of the MoE layer unchanged. We evaluate Self-Routing on GPT-2-scale language modeling and ImageNet-1K classification by comparing it against a standard learned router, random-routing baselines, and dense non-MoE baselines. Our results show that Self-Routing remains competitive with the learned-router baseline while removing all dedicated routing parameters, and yields more balanced expert utilization, with about 17 % higher average normalized routing entropy and no explicit load-balancing loss. On ImageNet-1K with DeiT-S/16, Self-Routing also slightly improves over the corresponding learned-router MoE. These findings suggest that effective MoE routing can emerge from the hidden representation itself without requiring a separate learned router module.

Modern LLM deployments confront a widening cost-performance spectrum: premium models deliver strong reasoning but are expensive, while lightweight models are economical yet brittle on complex tasks. Static escalation rules and keyword heuristics under-utilize this spectrum and fail to adapt across task types. We present xRouter, a tool-calling-based routing system in which a learned router can either answer directly or invoke one or more external models. The router is trained end-to-end with reinforcement learning using an explicit, cost-aware reward that encodes cost-performance trade-offs, eliminating the need for hand-engineered routing rules. Our implementation encompasses the full reinforcement learning framework, including reward and cost accounting, as well as the deployment and evaluation pipelines. Across diverse benchmarks, xRouter achieves strong cost-performance trade-offs (e.g., substantial cost reductions at comparable task completion rates), and provides empirical insights into what reliably helps learned routing and what does not, ranging from model trainability to the difficulty of eliciting sophisticated orchestration behaviors in small open models. We hope these findings and our open implementation will serve as a practical substrate for advancing learned, cost-aware LLM orchestration.

Router is the cornerstone component to the Mixture-of-Experts models. Serving as expert proxies, the rows of the router matrix compute their similarity to the MoE inputs to determine which subset of experts is activated. Ideally, each router row is designed to encode the expert matrix into this representative vector, such that its dot-product with token can better reflect token-expert affinity. However, there exists no design principles to enforce this condensation. In this paper, we propose to align each router row with the principal singular direction of the associated expert, as this direction provides the most expressive mathematical description of a matrix. Based on this principle, we propose a router redesign with Manifold Power Iteration (MPI). Specifically, it introduces a "Power-then-Retract" paradigm, where a power iteration step is performed on the router weights, followed by a retraction to impose a norm constraint to ensure both efficiency and stability. Theoretically, we show that MPI drives router rows to converge toward the principal singular directions of associated experts. Empirically, we pretrain MoE model across scales from 1B to 11B parameters to confirm that this alignment facilitates more effective MoE models.

Macro placement significantly affects a chip's post-route performance, power, and area (PPA). Most placement methods optimize half-perimeter wirelength (HPWL) as the primary objective. However, recent benchmarking shows a near-zero correlation between HPWL and post-route timing metrics such as the worst negative slack (WNS) and total negative slack (TNS). As a result, all six evaluated artificial intelligence (AI) placers degraded PPA relative to the hierarchical baseline. Recent efforts have tried to train cross-stage predictors to close this gap. However, existing methods focus on macro-only representations and use pre-route metrics as training labels. A label fidelity study of ten circuits at four design flow stages reveals that HPWL and pre-route timing poorly reflect final post-route timing rankings. In contrast, post-global-routing achieves the best balance between final timing fidelity and label generation cost-effectiveness. Based on this finding, PPAPlace is a timing-driven differentiable surrogate predicting post-route PPA from macro and standard-cell placements. The surrogate is a dual-stream predictor that combines graph attention over the chip netlist with spatial convolution over the placement grid. It is trained on post-global-routing labels. The predicted WNS and TNS gradients flow end-to-end back to cell coordinates. PPAPlace exploits these gradients in two ways: as a co-objective injected into an analytical placer's optimization loop (PPAPlace-CoOpt), and as a post-placement refinement step that adjusts macro positions via projected gradient descent (PPAPlace-Refine). On five ChiPBench test circuits excluded from training, PPAPlace improves average WNS and TNS by 22\% and 51\% over the hierarchical baseline while preserving power and routability, using the same predictor without test-circuit retraining. Code is available at https://github.com/ValleyC/PPAPlace.

Mixture-of-Experts (MoE) architectures have emerged as a leading paradigm for scaling large language models through sparse, routing-based computation. However, this design introduces a new attack surface: the routing mechanism that determines which experts process each input. Prior work shows that manipulating routing can bypass safety alignment, but existing attacks require model modification and thus apply only to locally deployed models. By contrast, real-world LLM services are remotely hosted and accessible only through input queries. This raises a fundamental question: can MoE routing be exploited through input-only attacks to induce stronger unsafe behaviors in real-world services? Our key insight is to optimize attacks in a white-box setting on open-source surrogate MoE models and transfer the resulting adversarial inputs to public API services within the same model family. This setting presents three main challenges: routing can be influenced only indirectly through input perturbations, routing control and output generation are tightly coupled, and even a successful safety bypass may still produce low-quality responses. To address these challenges, we propose Misrouter, an input-only attack framework that jointly targets routing behavior and expert functionality. Misrouter identifies weakly aligned experts that are willing to produce target harmful content by analyzing expert activations under harmful queries paired with unsafe continuations. It then optimizes adversarial inputs to steer routing toward these experts and away from strongly aligned ones. It further biases routing toward highly capable general-purpose experts identified from benign question-answering tasks. Finally, because routing and output objectives can conflict, Misrouter uses a two-phase optimization strategy that first steers routing and then optimizes harmful outputs while preserving routing stability.

Existing industrial-scale navigation applications contend with massive road networks, typically employing two main categories of approaches for route planning. The first relies on precomputed road costs for optimal routing and heuristic algorithms for generating alternatives, while the second, generative methods, has recently gained significant attention. However, the former struggles with personalization and route diversity, while the latter fails to meet the efficiency requirements of large-scale real-time scenarios. To address these limitations, we propose GenMRP, a generative framework for multi-route planning. To ensure generation efficiency, GenMRP first introduces a skeleton-to-capillary approach that dynamically constructs a relevant sub-network significantly smaller than the full road network. Within this sub-network, routes are generated iteratively. The first iteration identifies the optimal route, while the subsequent ones generate alternatives that balance quality and diversity using the newly proposed correctional boosting approach. Each iteration incorporates road features, user historical sequences, and previously generated routes into a Link Cost Model to update road costs, followed by route generation using the Dijkstra algorithm. Extensive experiments show that GenMRP achieves state-of-the-art performance with high efficiency in both offline and online environments. To facilitate further research, we have publicly released the training and evaluation dataset. GenMRP has been fully deployed in a real-world navigation app, demonstrating its effectiveness and benefits.

Recent works show that assembling multiple off-the-shelf large language models (LLMs) can harness their complementary abilities. To achieve this, routing is a promising method, which learns a router to select the most suitable LLM for each query. However, existing routing models are ineffective when multiple LLMs perform well for a query. To address this problem, in this paper, we propose a method called query-based Router by Dual Contrastive learning (RouterDC). The RouterDC model consists of an encoder and LLM embeddings, and we propose two contrastive learning losses to train the RouterDC model. Experimental results show that RouterDC is effective in assembling LLMs and largely outperforms individual top-performing LLMs as well as existing routing methods on both in-distribution (+2.76\%) and out-of-distribution (+1.90\%) tasks. Source code is available at https://github.com/shuhao02/RouterDC.

In recent years, Printed Circuit Boards (PCB) have become the backbone of a large number of consumer electronic devices leading to a surge in their production. This has made it imperative to employ automatic inspection systems to identify manufacturing defects in PCB before they are installed in the respective systems. An important task in this regard is the classification of defects as either true or pseudo defects, which decides if the PCB is to be re-manufactured or not. This work proposes a novel approach to detect most common defects in the PCBs. The problem has been approached by employing highly discriminative features based on multi-scale wavelet transform, which are further boosted by using a kernalized version of the support vector machines (SVM). A real world printed circuit board dataset has been used for quantitative analysis. Experimental results demonstrated the efficacy of the proposed method.

Model routing aims to select the most suitable model from a candidate pool for each query, balancing quality and cost. Existing VLM routing research is limited to traditional VQA evaluation, lacks systematic calibration optimization for open-set scenarios, and employs training objectives that dilute multi-positive signals via softmax normalization without incorporating cost. We address these limitations with three contributions: (1)VLM-ExecRouterBench, the first execution-oriented VLM routing benchmark covering Code, Agentic, and Search domains with 11 candidate models spanning nearly two orders of magnitude in pricing; (2)SCOPE-Router, a dual-tower router that matches queries to model behavior profiles constructed via hybrid calibration (random/diagnostic/diversity sampling), enabling new models to join routing without retraining; (3)CRM+RCCR, an architecture-agnostic cost-aware objective that encodes cost preference into continuous relevance targets through per-pair independent scoring, eliminating multi-positive dilution while regularizing queries with similar routing preferences to be closer in the routing space. Empirically, SCOPE-Router achieves the best Rank Score on all three benchmarks, surpassing the runner-up by 1.84 points under OOD settings and by 6.75 points under doubly OOD open-set evaluation. When applied to four diverse routers, CRM+RCCR improves Rank Score by 1.25--6.21 points.

Large-scale distributed training in production datacenters constitutes a challenging workload bottlenecked by network communication. In response, both major industry players (e.g., Ultra Ethernet Consortium) and parts of academia have surprisingly, and almost unanimously, agreed that packet spraying is necessary to improve the performance of large-scale distributed training workloads. In this paper, we challenge this prevailing belief and pose the question: How close can a singlepath transport approach an optimal multipath transport? We demonstrate that singlepath transport (from a NIC's perspective) is sufficient and can perform nearly as well as an ideal multipath transport with packet spraying, particularly in the context of distributed training in leaf-spine topologies. Our assertion is based on four key observations about workloads driven by collective communication patterns: (i) flows within a collective start almost simultaneously, (ii) flow sizes are nearly equal, (iii) the completion time of a collective is more crucial than individual flow completion times, and (iv) flows can be split upon arrival. We analytically prove that singlepath transport, using minimal flow splitting (at the application layer), is equivalent to an ideal multipath transport with packet spraying in terms of maximum congestion. Our preliminary evaluations support our claims. This paper suggests an alternative agenda for developing next-generation transport protocols tailored for large-scale distributed training.

In this paper, we explore the potential for quantum annealing to solve realistic routing problems. We focus on two NP-Hard problems, including the Traveling Salesman Problem with Time Windows and the Capacitated Vehicle Routing Problem with Time Windows. We utilize D-Wave's Quantum Annealer and Constrained Quadratic Model (CQM) solver within a hybrid framework to solve these problems. We demonstrate that while the CQM solver effectively minimizes route costs, it struggles to maintain time window feasibility as the problem size increases. To address this limitation, we implement a heuristic method that fixes infeasible solutions through a series of swapping operations. Testing on benchmark instances shows our method achieves promising results with an average optimality gap of 3.86%.

Over the past year, the vLLM Semantic Router project has released a series of work spanning: (1) core routing mechanisms -- signal-driven routing, context-length pool routing, router performance engineering, policy conflict detection, low-latency embedding models, category-aware semantic caching, user-feedback-driven routing adaptation, hallucination detection, and hierarchical content-safety classification for privacy and jailbreak protection; (2) fleet optimization -- fleet provisioning and energy-efficiency analysis; (3) agentic and multimodal routing -- multimodal agent routing, tool selection, CUA security, and multi-turn context memory and safety; (4) governance and standards -- inference routing protocols and multi-provider API extensions. Each paper tackled a specific problem in LLM inference, but the problems are not independent; for example, fleet provisioning depends on the routing policy, which depends on the workload mix, shifting as organizations adopt agentic and multimodal workloads. This paper distills those results into the Workload-Router-Pool (WRP) architecture, a three-dimensional framework for LLM inference optimization. Workload characterizes what the fleet serves (chat vs. agent, single-turn vs. multi-turn, warm vs. cold, prefill-heavy vs. decode-heavy). Router determines how each request is dispatched (static semantic rules, online bandit adaptation, RL-based model selection, quality-aware cascading). Pool defines where inference runs (homogeneous vs. heterogeneous GPU, disaggregated prefill/decode, KV-cache topology). We map our prior work onto a 3x3 WRP interaction matrix, identify which cells we have covered and which remain open, and propose twenty-one concrete research directions at the intersections, each grounded in our prior measurements, tiered by maturity from engineering-ready to open research.

Modeling networks as different graph types and researching on route finding strategies, to avoid congestion in dense subnetworks via graph-theoretic approaches, contributes to overall blocking probability reduction in networks. Our main focus is to study methods for modeling congested subnetworks and graph density measures, in order to identify routes that avoid dense subgraphs for global congestion avoidance, along with covering related algorithmic issues.

Algorithm performance in combinatorial optimization is highly sensitive to parameter settings, while a single globally tuned configuration often fails to exploit the heterogeneity of instances. This limitation is particularly evident in the Electric Capacitated Vehicle Routing Problem, where instances differ in structure, demand patterns, and energy constraints. This paper investigates instance-aware parameter configuration for Bilevel Late Acceptance Hill Climbing, a state-of-the-art metaheuristic for the Electric Capacitated Vehicle Routing Problem. An offline tuning procedure is used to obtain instance-specific parameter labels, which are then mapped from instance features via a regression model to enable parameter prediction for unseen instances prior to execution. Experimental results on the IEEE WCCI 2020 benchmark and its extensions show that the proposed approach achieves an average objective value reduction of 0.28% across eight held-out test instances relative to a globally tuned configuration. This corresponds to a significant cost reduction in multimillion-dollar transportation operations.

Recent advances in Large Reasoning Models (LRMs) have significantly improved long-chain reasoning capabilities over Large Language Models (LLMs). However, LRMs often produce unnecessarily lengthy outputs even for simple queries, leading to inefficiencies or even accuracy degradation compared to LLMs. To overcome this, we propose CP-Router, a training-free and model-agnostic routing framework that dynamically selects between an LLM and an LRM, demonstrated with multiple-choice question answering (MCQA) prompts. The routing decision is guided by the prediction uncertainty estimates derived via Conformal Prediction (CP), which provides rigorous coverage guarantees. To further refine the uncertainty differentiation across inputs, we introduce Full and Binary Entropy (FBE), a novel entropy-based criterion that adaptively selects the appropriate CP threshold. Experiments across diverse MCQA benchmarks, including mathematics, logical reasoning, and Chinese chemistry, demonstrate that CP-Router efficiently reduces token usage while maintaining or even improving accuracy compared to using LRM alone. We also extend CP-Router to diverse model pairings and open-ended QA, where it continues to demonstrate strong performance, validating its generality and robustness.

Computing distances and finding shortest paths in massive real-world networks is a fundamental algorithmic task in network analysis. There are two main approaches to solving this task. On one hand are traversal-based algorithms like bidirectional breadth-first search (BiBFS) with no preprocessing step and slow individual distance inquiries. On the other hand are indexing-based approaches, which maintain a large index. This allows for answering individual inquiries very fast; however, index creation is prohibitively expensive. We seek to bridge these two extremes: quickly answer distance inquiries without the need for costly preprocessing. In this work, we propose a new algorithm and data structure, WormHole, for approximate shortest path computations. WormHole leverages structural properties of social networks to build a sublinearly sized index, drawing upon the explicit core-periphery decomposition of Ben-Eliezer et al. Empirically, the preprocessing time of WormHole improves upon index-based solutions by orders of magnitude, and individual inquiries are consistently much faster than in BiBFS. The acceleration comes at the cost of a minor accuracy trade-off. Nonetheless, our empirical evidence demonstrates that WormHole accurately answers essentially all inquiries within a maximum additive error of 2. We complement these empirical results with provable theoretical guarantees, showing that WormHole requires n^{o(1)} node queries per distance inquiry in random power-law networks. In contrast, any approach without a preprocessing step requires n^{Ω(1)} queries for the same task. WormHole does not require reading the whole graph. Unlike the vast majority of index-based algorithms, it returns paths, not just distances. For faster inquiry times, it can be combined effectively with other index-based solutions, by running them only on the sublinear core.

Computer Use Agents (CUAs) translate natural-language instructions into Graphical User Interface (GUI) actions such as clicks, keystrokes, and scrolls by relying on a Vision-Language Model (VLM) to interpret screenshots and predict grounded tool calls. However, grounding accuracy varies dramatically across VLMs, while current CUA systems typically route every action to a single fixed model regardless of difficulty. We propose Adaptive VLM Routing (AVR), a framework that inserts a lightweight semantic routing layer between the CUA orchestrator and a pool of VLMs. For each tool call, AVR estimates action difficulty from multimodal embeddings, probes a small VLM to measure confidence, and routes the action to the cheapest model whose predicted accuracy satisfies a target reliability threshold. For warm agents with memory of prior UI interactions, retrieved context further narrows the capability gap between small and large models, allowing many actions to be handled without escalation. We formalize routing as a cost--accuracy trade-off, derive a threshold-based policy for model selection, and evaluate AVR using ScreenSpot-Pro grounding data together with the OpenClaw agent routing benchmark. Across these settings, AVR projects inference cost reductions of up to 78\% while staying within 2 percentage points of an all-large-model baseline. When combined with the Visual Confused Deputy guardrail, AVR also escalates high-risk actions directly to the strongest available model, unifying efficiency and safety within a single routing framework. Materials are also provided Model, benchmark, and code: https://github.com/vllm-project/semantic-router.

Addressing the critical theme of recycling electronic waste (E-waste), this contribution is dedicated to developing advanced automated data processing pipelines as a basis for decision-making and process control. Aligning with the broader goals of the circular economy and the United Nations (UN) Sustainable Development Goals (SDG), our work leverages non-invasive analysis methods utilizing RGB and hyperspectral imaging data to provide both quantitative and qualitative insights into the E-waste stream composition for optimizing recycling efficiency. In this paper, we introduce 'PCB-Vision'; a pioneering RGB-hyperspectral printed circuit board (PCB) benchmark dataset, comprising 53 RGB images of high spatial resolution paired with their corresponding high spectral resolution hyperspectral data cubes in the visible and near-infrared (VNIR) range. Grounded in open science principles, our dataset provides a comprehensive resource for researchers through high-quality ground truths, focusing on three primary PCB components: integrated circuits (IC), capacitors, and connectors. We provide extensive statistical investigations on the proposed dataset together with the performance of several state-of-the-art (SOTA) models, including U-Net, Attention U-Net, Residual U-Net, LinkNet, and DeepLabv3+. By openly sharing this multi-scene benchmark dataset along with the baseline codes, we hope to foster transparent, traceable, and comparable developments of advanced data processing across various scientific communities, including, but not limited to, computer vision and remote sensing. Emphasizing our commitment to supporting a collaborative and inclusive scientific community, all materials, including code, data, ground truth, and masks, will be accessible at https://github.com/hifexplo/PCBVision.

As large-scale multi-agent systems evolve, the communication protocol layer has become a critical yet under-evaluated factor shaping performance and reliability. Despite the existence of diverse protocols (A2A, ACP, ANP, Agora, etc.), selection is often intuition-driven and lacks standardized guidance. We introduce ProtocolBench, a benchmark that systematically compares agent protocols along four measurable axes: task success, end-to-end latency, message or byte overhead, and robustness under failures. On ProtocolBench, protocol choice significantly influences system behavior. In the Streaming Queue scenario, overall completion time varies by up to 36.5% across protocols, and mean end-to-end latency differs by 3.48 s. Under Fail-Storm Recovery, resilience also differs consistently across protocols. Beyond evaluation, we present ProtocolRouter, a learnable protocol router that selects per-scenario (or per-module) protocols from requirement and runtime signals. ProtocolRouter reduces Fail-Storm recovery time by up to 18.1% versus the best single-protocol baseline, and achieves scenario-specific gains such as higher success in GAIA. We also release ProtocolRouterBench to standardize protocol evaluation and improve reliability at scale.

By routing input tokens to only a few split experts, Sparse Mixture-of-Experts has enabled efficient training of large language models. Recent findings suggest that fixing the routers can achieve competitive performance by alleviating the collapsing problem, where all experts eventually learn similar representations. However, this strategy has two key limitations: (i) the policy derived from random routers might be sub-optimal, and (ii) it requires extensive resources during training and evaluation, leading to limited efficiency gains. This work introduces \HyperRout, which dynamically generates the router's parameters through a fixed hypernetwork and trainable embeddings to achieve a balance between training the routers and freezing them to learn an improved routing policy. Extensive experiments across a wide range of tasks demonstrate the superior performance and efficiency gains of \HyperRouter compared to existing routing methods. Our implementation is publicly available at {{https://github.com/giangdip2410/HyperRouter}}.

Large-scale commercial platforms usually involve numerous business domains for diverse business strategies and expect their recommendation systems to provide click-through rate (CTR) predictions for multiple domains simultaneously. Existing promising and widely-used multi-domain models discover domain relationships by explicitly constructing domain-specific networks, but the computation and memory boost significantly with the increase of domains. To reduce computational complexity, manually grouping domains with particular business strategies is common in industrial applications. However, this pre-defined data partitioning way heavily relies on prior knowledge, and it may neglect the underlying data distribution of each domain, hence limiting the model's representation capability. Regarding the above issues, we propose an elegant and flexible multi-distribution modeling paradigm, named Adaptive Distribution Hierarchical Model (AdaptDHM), which is an end-to-end optimization hierarchical structure consisting of a clustering process and classification process. Specifically, we design a distribution adaptation module with a customized dynamic routing mechanism. Instead of introducing prior knowledge for pre-defined data allocation, this routing algorithm adaptively provides a distribution coefficient for each sample to determine which cluster it belongs to. Each cluster corresponds to a particular distribution so that the model can sufficiently capture the commonalities and distinctions between these distinct clusters. Extensive experiments on both public and large-scale Alibaba industrial datasets verify the effectiveness and efficiency of AdaptDHM: Our model achieves impressive prediction accuracy and its time cost during the training stage is more than 50% less than that of other models.

Large language model (LLM) routing has emerged as a crucial strategy for balancing computational costs with performance by dynamically assigning queries to the most appropriate model based on query complexity. Despite recent advances showing that preference-data-based routers can outperform traditional methods, current evaluation benchmarks remain limited. They largely focus on general model capabilities while overlooking task-specific behaviors and critical concerns such as privacy, safety, and potential backdoor vulnerabilities introduced through preference data. In response, we propose the DSC benchmark: Diverse, Simple, and Categorized, an evaluation framework that categorizes router performance across a broad spectrum of query types, including coding, translation, mathematics, human instructions, general knowledge, and LLM jailbreaking. Additionally, it integrates privacy and safety assessments to reveal hidden risks. Our experiments on three preference-based routers and two commercial counterparts demonstrate that while these systems improve efficiency, they often make suboptimal, category-driven decisions. For instance, a BERT-based router directs all coding and mathematics queries to the most powerful LLM even when simpler models would suffice, while routing jailbreaking attempts to weaker models, thereby elevating safety risks.

Modular quantum processors require a compiler to reason about two resources at the same time: local device connectivity and communication across QPUs. A mapping that is acceptable on a single coupling graph may be unsuitable for a modular machine if it creates excessive cross-QPU traffic, concentrates that traffic on a small number of interconnect links, or assigns many boundary qubits to a QPU with few communication ports. This paper presents QuPort, a Python and Qiskit-based compilation framework that studies this setting through an explicit three-level model: a weighted logical interaction graph, a directed physical coupling map, and an undirected QPU-level interconnect graph. The main partitioning method, TPCCAP, optimizes the implemented objective formed by weighted cut distance, communication-port overflow, and routed link-load congestion. The framework also includes heavy-edge clustering, balanced greedy partitioning, simulated-annealing refinement, communication-port-aware layout, extraction of remote two-qubit operations, local-only routing of per-QPU circuits, and topology-aware schedule estimation. The model is a compiler-level abstraction. It does not claim a calibrated hardware runtime or an implementation of a physical remote-gate protocol.

Mixture of Experts models are widely assumed to achieve domain specialization through sparse routing. In this work, we question this assumption by introducing COMMITTEEAUDIT, a post hoc framework that analyzes routing behavior at the level of expert groups rather than individual experts. Across three representative models and the MMLU benchmark, we uncover a domain-invariant Standing Committee. This is a compact coalition of routed experts that consistently captures the majority of routing mass across domains, layers, and routing budgets, even when architectures already include shared experts. Qualitative analysis further shows that Standing Committees anchor reasoning structure and syntax, while peripheral experts handle domain-specific knowledge. These findings reveal a strong structural bias toward centralized computation, suggesting that specialization in Mixture of Experts models is far less pervasive than commonly believed. This inherent bias also indicates that current training objectives, such as load-balancing losses that enforce uniform expert utilization, may be working against the model's natural optimization path, thereby limiting training efficiency and performance.

Mixture-of-Experts (MoE) scales model capacity efficiently by selectively routing inputs to a specialized subset of experts. However, input-expert specialization, the core motivation of MoE, critically depends on whether the router is actually aware of input structure. In practice, MoE routing is typically implemented as a shallow linear projection with limited awareness of input representation, which often leads to unstable routing. We propose STAR, a Structure Aware Routing that rethinks MoE routing as a subspace learning problem by augmenting standard learnable routing with an evolving principal subspace that tracks dominant input structure via Generalized Hebbian Algorithm (GHA). By aligning routing decisions directly with input structure, STAR enables stable expert specialization. We evaluate STAR on controlled synthetic setup and large-scale language and vision tasks, where it consistently improves routing quality and downstream performance over strong MoE baselines. Moreover, optional test-time subspace updates further enhance routing robustness and generalization under input distribution shifts.

Independently trained domain specialists can be fused post-hoc into a single model that outperforms any individual specialist, and the gain is predictable: gain = 0.82 x divergence - 2.72 (R^2 = 0.856, n=6, 3-26% divergence). This enables practitioners to estimate cooperative value before committing compute. Below ~3.3% divergence, gains approach zero.In the KALAVAI protocol, contributors fine-tune copies of a shared checkpoint independently, then submit for lightweight MoE routing (500 steps). Gains are consistent: +7.72% at 410M (+/-0.02%, 3 seeds), +7.49% at 1B (+/-0.01%, 3 seeds), +6.53% at 6.9B, each over the best specialist. The router matches domain-oracle routing within <10^{-5} nats. Cross-lingual fusion (Tamil/Yoruba/Welsh/Code) achieves +21.76%, with Yoruba perplexity falling 41.9 to 7.7. A 20-contributor federation achieves +16.71% (+/-0.07pp, 3 seeds).Three requirements bound the protocol. Shared initialisation is necessary: checkpoint mismatch degrades routing. Frozen layers are optional below ~10,000 steps and beneficial beyond. Learned routing is essential: uniform averaging degrades by -1.2% vs. best specialist, while any trained router achieves oracle-optimal assignment.

The performance of a language model has been shown to be effectively modeled as a power-law in its parameter count. Here we study the scaling behaviors of Routing Networks: architectures that conditionally use only a subset of their parameters while processing an input. For these models, parameter count and computational requirement form two independent axes along which an increase leads to better performance. In this work we derive and justify scaling laws defined on these two variables which generalize those known for standard language models and describe the performance of a wide range of routing architectures trained via three different techniques. Afterwards we provide two applications of these laws: first deriving an Effective Parameter Count along which all models scale at the same rate, and then using the scaling coefficients to give a quantitative comparison of the three routing techniques considered. Our analysis derives from an extensive evaluation of Routing Networks across five orders of magnitude of size, including models with hundreds of experts and hundreds of billions of parameters.

Advanced 2.5D Systems-in-Package (SiPs) compose a growing portion of high-performance systems. While the packaging and interconnect choices play a large role in the overall system design, system architects still lack a suitable framework for early design space exploration which takes these choices into account. Current interconnect models fall mostly into the categories of 1) detailed models which are generally inflexible and require deep packaging expertise, or 2) high-level models which don't provide enough information to make accurate architectural design decisions. In this work, we present an automated chiplet IP generation framework which provides power, performance, and area estimates for various 2.5D packaging and communication configurations. The IP generator produces standard collaterals required for high-level simulation/estimation, RTL simulation, and place-and-route-level implementation (Verilog, Liberty, LEF, and datasheet). Using our framework, architects can co-optimize the package and chiplet architecture through rapid power, performance, and area estimates of various packaging strategies. As a case study, we examine generated UCIe interfaces across several packaging options.

Previous works for PCB defect detection based on image difference and image processing techniques have already achieved promising performance. However, they sometimes fall short because of the unaccounted defect patterns or over-sensitivity about some hyper-parameters. In this work, we design a deep model that accurately detects PCB defects from an input pair of a detect-free template and a defective tested image. A novel group pyramid pooling module is proposed to efficiently extract features of a large range of resolutions, which are merged by group to predict PCB defect of corresponding scales. To train the deep model, a dataset is established, namely DeepPCB, which contains 1,500 image pairs with annotations including positions of 6 common types of PCB defects. Experiment results validate the effectiveness and efficiency of the proposed model by achieving 98.6% mAP @ 62 FPS on DeepPCB dataset. This dataset is now available at: https://github.com/tangsanli5201/DeepPCB.

Multi-agent systems built on large language models (LLMs) require many coordination choices that are difficult to fix a priori: which skill protocol to invoke, which agent role should perform a subtask, which model to bind to each role, how roles should interact, when to use retrieval or verification, and when to omit a step entirely. These choices interact with task regime and operational constraints, so static pipelines and one-off model comparisons provide only a limited view of the design space. This paper introduces AgensFlow, an open-source framework that treats multi-agent coordination as an online policy-learning problem under partial observability. The framework makes coordination decisions observable and learnable from repeated trajectories, rather than treating skill, role, model, topology, and evaluation choices as fixed pipeline design. AgensFlow is evaluated on two corpora: distributed-systems incident tasks and security-advisory tasks. The evaluation shows three main results: learned routing reaches a higher-quality operating point than a fixed pipeline baseline on coordination-heavy classes; skip:X isolates topology compression as a meaningful part of the substrate; and warm-started policy graphs can reduce exploration cost while preserving plateau quality. Overall, the results support that learned, auditable routing can improve coordination-heavy multi-agent workflows over static wiring.

Network-on-Chip (NoC) is widely used to facilitate communication between components in sophisticated System-on-Chip (SoC) designs. Security of the on-chip communication is crucial because exploiting any vulnerability in shared NoC would be a goldmine for an attacker that puts the entire computing infrastructure at risk. NoC security relies on effective countermeasures against diverse attacks, including attacks on anonymity. We investigate the security strength of existing anonymous routing protocols in NoC architectures. Specifically, this paper makes two important contributions. We show that the existing anonymous routing is vulnerable to machine learning (ML) based flow correlation attacks on NoCs. We propose lightweight anonymous routing with traffic obfuscation techniques to defend against ML-based flow correlation attacks. Experimental studies using both real and synthetic traffic reveal that our proposed attack is successful against state-of-the-art anonymous routing in NoC architectures with high accuracy (up to 99%) for diverse traffic patterns, while our lightweight countermeasure can defend against ML-based attacks with minor hardware and performance overhead.

As large language models (LLMs) evolve into autonomous agents that execute long-horizon workflows, invoking a high-capability model at every step becomes economically unsustainable. While model routing is effective for single-turn queries, agentic routing is a sequential, path-dependent problem: early mistakes compound, feedback is often at the end of the episode, and deployments often demand strict per-task spending limits. We propose Budget-Aware Agentic Routing, which selects between a cheap and an expensive model at each step to optimize the cost--success frontier and to operate under strict per-task budgets. We propose Boundary-Guided Training, which leverages two boundary policies (always-small vs.\ always-large) to build a difficulty taxonomy and to anchor learning under sparse rewards. Our approach warms start with boundary-guided SFT data synthesis via stratified sampling of cost-efficient trajectories, then applies Boundary-Guided Policy Optimization (BoPO), combining boundary-relative rewards with a reference-guided advantage to avoid degenerate cheap-failure solutions. Experiment results show that our method improves the efficiency frontier, matching strong routing baselines at substantially lower cost while demonstrating generalization to strict inference-time budget constraints. Overall, our work establishes a foundational framework for agentic routing, shifting the paradigm from static model selection to dynamic, budget-aware sequential decision-making.

Cost-aware routing dynamically dispatches user queries to models of varying capability to balance performance and inference cost. However, the routing strategy introduces a new security concern that adversaries may manipulate the router to consistently select expensive high-capability models. Existing routing attacks depend on either white-box access or heuristic prompts, rendering them ineffective in real-world black-box scenarios. In this work, we propose R^2A, which aims to mislead black-box LLM routers to expensive models via adversarial suffix optimization. Specifically, R^2A deploys a hybrid ensemble surrogate router to mimic the black-box router. A suffix optimization algorithm is further adapted for the ensemble-based surrogate. Extensive experiments on multiple open-source and commercial routing systems demonstrate that {R^2A} significantly increases the routing rate to expensive models on queries of different distributions. Code and examples: https://github.com/thcxiker/R2A-Attack.

The availability of performant pre-trained models has led to a proliferation of fine-tuned expert models that are specialized to particular domains. This has enabled the creation of powerful and adaptive routing-based "Model MoErging" methods with the goal of using expert modules to create an aggregate system with improved performance or generalization. However, existing MoErging methods often prioritize generalization to unseen tasks at the expense of performance on held-in tasks, which limits its practical applicability in real-world deployment scenarios. We observe that current token-level routing mechanisms neglect the global semantic context of the input task. This token-wise independence hinders effective expert selection for held-in tasks, as routing decisions fail to incorporate the semantic properties of the task. To address this, we propose, Global and Local Instruction Driven Expert Router (GLIDER) that integrates a multi-scale routing mechanism, encompassing a semantic global router and a learned local router. The global router leverages LLM's advanced reasoning capabilities for semantic-related contexts to enhance expert selection. Given the input query and LLM, the router generates semantic task instructions that guide the retrieval of the most relevant experts across all layers. This global guidance is complemented by a local router that facilitates token-level routing decisions within each module, enabling finer control and enhanced performance on unseen tasks. Our experiments using T5-based models for T0 and FLAN tasks demonstrate that GLIDER achieves substantially improved held-in performance while maintaining strong generalization on held-out tasks. We also perform ablations experiments to dive deeper into the components of GLIDER. Our experiments highlight the importance of our multi-scale routing that leverages LLM-driven semantic reasoning for MoErging methods.

Automated detection of defects in Printed Circuit Board (PCB) manufacturing using Solder Paste Inspection (SPI) and Automated Optical Inspection (AOI) machines can help improve operational efficiency and significantly reduce the need for manual intervention. In this paper, using SPI-extracted features of 6 million pins, we demonstrate a data-centric approach to train Machine Learning (ML) models to detect PCB defects at three stages of PCB manufacturing. The 6 million PCB pins correspond to 2 million components that belong to 15,387 PCBs. Using a base extreme gradient boosting (XGBoost) ML model, we iterate on the data pre-processing step to improve detection performance. Combining pin-level SPI features using component and PCB IDs, we developed training instances also at the component and PCB level. This allows the ML model to capture any inter-pin, inter-component, or spatial effects that may not be apparent at the pin level. Models are trained at the pin, component, and PCB levels, and the detection results from the different models are combined to identify defective components.

Prompt routing dynamically selects the most appropriate large language model from a pool of candidates for each query, optimizing performance while managing costs. As model pools scale to include dozens of frontier models with narrow performance gaps, existing approaches face significant challenges: manually defined task taxonomies cannot capture fine-grained capability distinctions, while monolithic routers struggle to differentiate subtle differences across diverse tasks. We propose a two-stage routing architecture that addresses these limitations through automated fine-grained task discovery and task-aware quality estimation. Our first stage employs graph-based clustering to discover latent task types and trains a classifier to assign prompts to discovered tasks. The second stage uses a mixture-of-experts architecture with task-specific prediction heads for specialized quality estimates. At inference, we aggregate predictions from both stages to balance task-level stability with prompt-specific adaptability. Evaluated on 10 benchmarks with 11 frontier models, our method consistently outperforms existing baselines and surpasses the strongest individual model while incurring less than half its cost.

We present ACAR (Adaptive Complexity and Attribution Routing), a measurement framework for studying multi-model orchestration under auditable conditions. ACAR uses self-consistency variance (sigma) computed from N=3 probe samples to route tasks across single-model, two-model, and three-model execution modes. The system is implemented on top of TEAMLLM, a deterministic execution substrate with immutable artifacts and complete decision traces. We evaluate ACAR on 1,510 tasks spanning four benchmarks: MathArena, Reasoning Gym, LiveCodeBench, and SuperGPQA, using Claude Sonnet 4, GPT-4o, and Gemini 2.0 Flash, producing more than 7,550 auditable runs. Results show that sigma-based routing achieves 55.6 percent accuracy, exceeding the two-model baseline of 54.4 percent while avoiding full ensembling on 54.2 percent of tasks. The routing mechanism is model-agnostic and requires no learned components. We also document negative results. First, retrieval augmentation reduced accuracy by 3.4 percentage points, as median retrieval similarity was only 0.167, demonstrating that experience injection without semantic alignment introduces noise rather than grounding. Second, when models agree on incorrect answers (sigma equals zero), no downstream ensemble can recover; this agreement-but-wrong failure mode is intrinsic to self-consistency and bounds achievable accuracy at approximately eight percentage points below full ensembling. Third, attribution estimates based on proxy signals such as response similarity and entropy showed weak correlation with ground-truth leave-one-out values, indicating that practical attribution requires explicit counterfactual computation. This work documents which assumptions fail in practice and provides falsifiable baselines for future research on routing, retrieval, and multi-model attribution.

Connected Autonomous Vehicles (CAVs) promise to reduce congestion in future urban networks, potentially by optimizing their routing decisions. Unlike for human drivers, these decisions can be made with collective, data-driven policies, developed by machine learning algorithms. Reinforcement learning (RL) can facilitate the development of such collective routing strategies, yet standardized and realistic benchmarks are missing. To that end, we present : Urban Routing Benchmark for RL-equipped Connected Autonomous Vehicles. is a comprehensive benchmarking environment that unifies evaluation across 29 real-world traffic networks paired with realistic demand patterns. comes with a catalog of predefined tasks, four state-of-the-art multi-agent RL (MARL) algorithm implementations, three baseline methods, domain-specific performance metrics, and a modular configuration scheme. Our results suggest that, despite the lengthy and costly training, state-of-the-art MARL algorithms rarely outperformed humans. Experimental results reported in this paper initiate the first leaderboard for MARL in large-scale urban routing optimization and reveal that current approaches struggle to scale, emphasizing the urgent need for advancements in this domain.

Today's LLM ecosystem comprises a wide spectrum of models that differ in size, capability, and cost. No single model is optimal for all scenarios; hence, LLM routers have become essential for selecting the most appropriate model under varying circumstances. However, the rapid emergence of various routers makes choosing the right one increasingly challenging. To address this problem, we need a comprehensive router comparison and a standardized leaderboard, similar to those available for models. In this work, we introduce RouterArena, the first open platform enabling comprehensive comparison of LLM routers. RouterArena has (1) a principally constructed dataset with broad knowledge domain coverage, (2) distinguishable difficulty levels for each domain, (3) an extensive list of evaluation metrics, and (4) an automated framework for leaderboard updates. Leveraging our framework, we have produced the initial leaderboard with detailed metrics comparison as shown in Figure 1. We will make our platform open to the public soon.

Robust routing under uncertainty is central to real-world logistics, yet most benchmarks assume static, idealized settings. We present SVRPBench, the first open benchmark to capture high-fidelity stochastic dynamics in vehicle routing at urban scale. Spanning more than 500 instances with up to 1000 customers, it simulates realistic delivery conditions: time-dependent congestion, log-normal delays, probabilistic accidents, and empirically grounded time windows for residential and commercial clients. Our pipeline generates diverse, constraint-rich scenarios, including multi-depot and multi-vehicle setups. Benchmarking reveals that state-of-the-art RL solvers like POMO and AM degrade by over 20% under distributional shift, while classical and metaheuristic methods remain robust. To enable reproducible research, we release the dataset and evaluation suite. SVRPBench challenges the community to design solvers that generalize beyond synthetic assumptions and adapt to real-world uncertainty.

Foundational Large Language Models (LLMs) demonstrate proficiency on a wide range of general tasks, and achieve remarkable results on various specialized tasks via domain-expert LLMs. With the ever-growing list of available LLMs, inference routers are being proposed to select the most appropriate LLM for each prompt. However, existing routing methods either optimize cost across weak-to-strong generalist LLMs or require substantial training to support domain-expertise routing. In this paper, we propose IR3DE, a Ridge Regression-based Router for Domain Experts that provides cheap and fast routing decisions for each prompt. We evaluate IR3DE in two Causal Language Modeling (CLM) settings where the tasks are next-token prediction for all domains, and one reasoning setting where each domain has its own distinct reasoning task. Despite being a linear router, IR3DE achieves performance comparable to the other baselines in both CLM settings, and surpassing them in the reasoning setting, with a normalized performance of 98.4%. Moreover, IR3DE enables the addition or removal of new domain experts without requiring the router to be retrained from scratch, allowing a dynamic set of LLMs to be served with minimal disruption to the router itself. Our code is available at: github.com/gensyn-ai/IR3DE.

This work presents a novel monolithic 3D (M3D) FPGA architecture that leverages stackable back-end-of-line (BEOL) transistors to implement configuration memory and pass gates, significantly improving area, latency, and power efficiency. By integrating n-type (W-doped In_2O_3) and p-type (SnO) amorphous oxide semiconductor (AOS) transistors in the BEOL, Si SRAM configuration bits are substituted with a less leaky equivalent that can be programmed at logic-compatible voltages. BEOL-compatible AOS transistors are currently under extensive research and development in the device community, with investment by leading foundries, from which reported data is used to develop robust physics-based models in TCAD that enable circuit design. The use of AOS pass gates reduces the overhead of reconfigurable circuits by mapping FPGA switch block (SB) and connection block (CB) matrices above configurable logic blocks (CLBs), thereby increasing the proximity of logic elements and reducing latency. By interfacing with the latest Verilog-to-Routing (VTR) suite, an AOS-based M3D FPGA design implemented in 7 nm technology is demonstrated with 3.4x lower area-time squared product (AT^2), 27% lower critical path latency, and 26% lower reconfigurable routing block power on benchmarks including hyperdimensional computing and large language models (LLMs).

Existing LLM routing methods typically treat a model's single response to a query as its capability label for training routers. However, because LLM generation is inherently stochastic, such single-shot supervision provides only a noisy observation of a query-model pair's behavior rather than a reliable capability estimate. We show that this assumption introduces systematic noise into routing supervision, making learned routing policies less reliable. To address this issue, we propose DARS (Distribution-Aware Routing Supervision), a framework that constructs routing supervision from a distributional view of model behavior. Instead of relying on a single generated response, DARS considers uncertainty from both the input side and the output side, capturing how semantically equivalent query formulations and stochastic generations affect model performance. Based on these distribution-aware observations, DARS builds more reliable supervision signals for routing. Experiments across diverse tasks show that single-shot labels can be misleading for model selection, while distribution-aware supervision provides more stable labels and improves learned routing behavior. Our results suggest that reliable LLM routing should move beyond single-response observations and be grounded in query-level model capability distributions.

Large language model (LLM) routers improve the efficiency of multi-model systems by directing each query to the most appropriate model while leveraging the diverse strengths of heterogeneous LLMs. Most existing approaches frame routing as a classification problem based solely on the input query. While this reduces overhead by avoiding inference across all models, it overlooks valuable information that could be gleaned from potential outputs and fails to capture implicit intent or contextual nuances that often emerge only during response generation. These limitations can result in suboptimal routing decisions, particularly for complex or ambiguous queries that require deeper semantic understanding. To address this challenge, we propose Lookahead, a routing framework that "foresees" potential model outputs by predicting their latent representations and uses these predictions to guide model selection, thus enabling more informed routing without full inference. Within this framework, we implement two approaches based on causal and masked language models. Empirical evaluations across seven public benchmarks - spanning instruction following, mathematical reasoning, and code generation - show that Lookahead consistently outperforms existing routing baselines, achieving an average performance gain of 7.7% over the state-of-the-art. Our code is available at https://github.com/huangcb01/lookahead-routing.