Daily Papers

Technologies that function at room temperature often require magnets with a high Curie temperature, T_C, and can be improved with better materials. Discovering magnetic materials with a substantial T_C is challenging because of the large number of candidates and the cost of fabricating and testing them. Using the two largest known data sets of experimental Curie temperatures, we develop machine-learning models to make rapid T_C predictions solely based on the chemical composition of a material. We train a random forest model and a k-NN one and predict on an initial dataset of over 2,500 materials and then validate the model on a new dataset containing over 3,000 entries. The accuracy is compared for multiple compounds' representations ("descriptors") and regression approaches. A random forest model provides the most accurate predictions and is not improved by dimensionality reduction or by using more complex descriptors based on atomic properties. A random forest model trained on a combination of both datasets shows that cobalt-rich and iron-rich materials have the highest Curie temperatures for all binary and ternary compounds. An analysis of the model reveals systematic error that causes the model to over-predict low-T_C materials and under-predict high-T_C materials. For exhaustive searches to find new high-T_C materials, analysis of the learning rate suggests either that much more data is needed or that more efficient descriptors are necessary.

The discovery of van der Waals magnets has established a new domain in the field of magnetism, opening novel pathways for the electrical control of magnetic properties. In this context, Fe3GeTe2 (FGT) emerges as an exemplary candidate owing to its intrinsic metallic properties, which facilitate the interplay of both charge and spin degrees of freedom. Here, the bidirectional voltage control of exchange bias (EB) effect in a perpendicularly magnetized all-van der Waals FGT/O-FGT/hBN heterostructure is demonstrated. The antiferromagnetic O-FGT layer is formed by naturally oxidizing the FGT surface. The observed EB magnitude reaches 1.4 kOe with a blocking temperature (150 K) reaching close to the Curie temperature of FGT. Both the exchange field and the blocking temperature values are among the highest in the context of layered materials. The EB modulation exhibits a linear dependence on the gate voltage and its polarity, observable in both positive and negative field cooling (FC) experiments. Additionally, gate voltage-controlled magnetization switching, highlighting the potential of FGT-based heterostructures is demonstrated in advanced spintronic devices. These findings display a methodology to modulate the magnetism of van der Waals magnets offering new avenues for the development of high-performance magnetic devices.

In recent times, transformer networks have achieved state-of-the-art performance in a wide range of natural language processing tasks. Here we present a workflow based on the fine-tuning of BERT models for different downstream tasks, which results in the automated extraction of structured information from unstructured natural language in scientific literature. Contrary to existing methods for the automated extraction of structured compound-property relations from similar sources, our workflow does not rely on the definition of intricate grammar rules. Hence, it can be adapted to a new task without requiring extensive implementation efforts and knowledge. We test our data-extraction workflow by automatically generating a database for Curie temperatures and one for band gaps. These are then compared with manually-curated datasets and with those obtained with a state-of-the-art rule-based method. Furthermore, in order to showcase the practical utility of the automatically extracted data in a material-design workflow, we employ them to construct machine-learning models to predict Curie temperatures and band gaps. In general we find that, although more noisy, automatically extracted datasets can grow fast in volume and that such volume partially compensates for the inaccuracy in downstream tasks.

The NMR measurements performed on a single orthorhombic crystal of superconducting ferromagnet UCoGe (Y.Ihara et al, Phys. Rev. Lett. v.105, 206403 (2010)) demonstrate strongly anisotropic magnetic properties of this material. The presented calculations allow to establish the dependence of longitudinal spin-lattice relaxation rate from temperature and magnetic field. The value 1/T_1T in field perpendicular to spontaneous magnetisation directed along c-axis has maximum in vicinity of Curie temperature whereas it does not reveal similar behaviour in field parallel to the direction of spontaneous magnetisation. Also there was shown that the longitudinal spin-lattice relaxation rate is strongly field dependent when the field directed in b-crystallographic direction but field independent if magnetic field is oriented along a-axis.

Autoresearch offers a flexible paradigm for automating scientific tasks, in which an AI agent proposes, implements, evaluates, and refines candidate solutions against a quantitative objective. Here, we use composition-based materials-property prediction to test whether such agents can perform a task beyond model selection and hyperparameter optimization: the design of input descriptors. We introduce Automat, an autoresearch framework where a coding agent based on a large language model generates composition-only descriptors for chemical compounds and evaluates them using a random forest workflow. The agent is restricted to information derivable from chemical formulas and iteratively proposes, implements, and tests chemically motivated descriptor strategies. We apply Automat, with OpenAI Codex using GPT-5.5 as the coding agent, to the prediction of experimental band gaps in inorganic materials and Curie temperatures in ferromagnetic compounds. In both tasks, Automat improves over fractional-composition, Magpie, and combined fractional-composition/Magpie baselines, while producing descriptor families that are chemically interpretable. These results provide a demonstration that autoresearch agents can generate competitive, task-specific materials descriptors without manual feature engineering during the run. They also reveal current limitations, including descriptor redundancy, sensitivity to greedy feature expansion, and the need for explicit complexity control, descriptor pruning, and more sophisticated search strategies.

A new multiferroic material, CuBr2, is reported for the first time. CuBr2 has not only a high transition temperature (close to liquid nitrogen temperature) but also low dielectric loss and strong magnetoelectric coupling. These findings reveal the importance of anion effects in the search for the high temperature multiferroics materials among these low-dimensional spin systems.

We successfully synthesized a novel intermetallic compound rm CrFe_2Ge_2 with the rm Fe_{13}Ge_{8}-type crystal structure. A structural study is presented combining single-crystal X-ray diffraction and Mössbauer spectroscopy analysis, confirming the presence of two distinct Fe sublattices. rm CrFe_2Ge_2 exhibits a metallic ferromagnetic state with T_C approx rm 200~K. This material does not follow the usual M^2 propto H/M Arrott law, rather a modified Arrott law is obeyed in this material. The critical exponents determined from detailed analysis of modified Arrott plots were found to be β= 0.392, γ= 1.309 and δ= 4.26 obtained from the critical isotherm at T_{rm C} =rm 200~K. Self-consistency and reliability of the critical exponent analysis were verified by the Widom scaling law and scaling equations. Using the results from renormalization group calculation, the critical behavior of rm CrFe_2Ge_2 is akin to that of a d=3, n=3 ferromagnet in which the magnetic exhange distance is found to decay as J(r) approx r^{-4.86} with long-range magnetic coupling. The evaluated Rhodes-Wohlfarth ratio of sim 3 points to an itinerant ferromagnetic ground state. Low-temperature measurements of resistivity, p(T), and specific heat, C_P(T), reveal a pronounced contribution from electron-magnon scattering.

Scientific problem-solving involves synthesizing information while applying expert knowledge. We introduce CURIE, a scientific long-Context Understanding,Reasoning and Information Extraction benchmark to measure the potential of Large Language Models (LLMs) in scientific problem-solving and assisting scientists in realistic workflows. This benchmark introduces ten challenging tasks with a total of 580 problems and solution pairs curated by experts in six disciplines - materials science, condensed matter physics, quantum computing, geospatial analysis, biodiversity, and proteins - covering both experimental and theoretical work-flows in science. We evaluate a range of closed and open LLMs on tasks in CURIE which requires domain expertise, comprehension of long in-context information,and multi-step reasoning. While Gemini Flash 2.0 and Claude-3 show consistent high comprehension across domains, the popular GPT-4o and command-R+ fail dramatically on protein sequencing tasks. With the best performance at 32% there is much room for improvement for all models. We hope that insights gained from CURIE can guide the future development of LLMs in sciences. Evaluation code and data are in https://github.com/google/curie

Critical temperature, T_c, and the transition width, ΔT_c, are two primary parameters of the superconducting transition. The latter parameter reflects the superconducting state disturbance originating from the thermodynamic fluctuations, atomic disorder, applied magnetic field, the presence of secondary crystalline phases, applied pressure, etc. Recently, Hirsch and Marsiglio (2020 arXiv:2012.12796) performed an analysis of the transition width in several near-room-temperature superconductors (NRTS) and reported that the reduced transition width, ΔT_c/T_c, in these materials does not follow a conventional trend of transition width broadening on applied magnetic field observed in low- and high-T_c superconductors. Here we present thorough mathematical analysis of the magnetoresistive data, R(T,B), for the high-entropy alloy (ScZrNb)_{0.65}[RhPd]_{0.35} and hydrogen-rich superconductors of Im-3m-H_{3}S, C2/m-LaH_{10} and P63/mmc-CeH_9. We found that the reduced transition width, ΔT_c/T_c, in these materials does follow a conventional broadening trend on applied magnetic field.

Hyperthermia (HT) in combination with radio- and/or chemotherapy has become an accepted cancer treatment for distinct solid tumour entities. In HT, tumour tissue is exogenously heated to temperatures between 39 and 43 ^circC for 60 minutes. Temperature monitoring can be performed non-invasively using dynamic magnetic resonance imaging (MRI). However, the slow nature of MRI leads to motion artefacts in the images due to the movements of patients during image acquisition. By discarding parts of the data, the speed of the acquisition can be increased - known as undersampling. However, due to the invalidation of the Nyquist criterion, the acquired images might be blurry and can also produce aliasing artefacts. The aim of this work was, therefore, to reconstruct highly undersampled MR thermometry acquisitions with better resolution and with fewer artefacts compared to conventional methods. The use of deep learning in the medical field has emerged in recent times, and various studies have shown that deep learning has the potential to solve inverse problems such as MR image reconstruction. However, most of the published work only focuses on the magnitude images, while the phase images are ignored, which are fundamental requirements for MR thermometry. This work, for the first time, presents deep learning-based solutions for reconstructing undersampled MR thermometry data. Two different deep learning models have been employed here, the Fourier Primal-Dual network and the Fourier Primal-Dual UNet, to reconstruct highly undersampled complex images of MR thermometry. The method reduced the temperature difference between the undersampled MRIs and the fully sampled MRIs from 1.3 ^circC to 0.6 ^circC in full volume and 0.49 ^circC to 0.06 ^circC in the tumour region for an acceleration factor of 10.

We report a quasi-one-dimensional S = 1 spin chain compound BaNiTe2O7. This magnetic system has been investigated by magnetic susceptibility, specific heat, and neutron powder diffraction. These results indicate that BaNiTe2O7 develops a short-range magnetic correlation around T ~ 22 K. With further cooling, an antiferromagnetic phase transition is observed at TN ~ 5.4 K. Neutron powder diffraction revealed antiferromagnetic noncollinear order with a commensurate propagation vector k = (1/2, 1, 0). The refined magnetic moment size of Ni2+ at 1.5 K is 1.84{\mu}B, and its noncollinear spin texture is confirmed by first-principles calculations. Inelastic neutron-scattering results and density functional theory calculations confirmed the quasi-one-dimensional nature of the spin systems.

With copper-substituted lead apatite below room temperature, we observe diamagnetic dc magnetization under magnetic field of 25 Oe with remarkable bifurcation between zero-field-cooling and field-cooling measurements, and under 200 Oe it changes to be paramagnetism. A glassy memory effect is found during cooling. Typical hysteresis loops for superconductors are detected below 250 K, along with an asymmetry between forward and backward sweep of magnetic field. Our experiment suggests at room temperature the Meissner effect is possibly present in this material.

The application of superconducting materials is becoming more and more widespread. Traditionally, the discovery of new superconducting materials relies on the experience of experts and a large number of "trial and error" experiments, which not only increases the cost of experiments but also prolongs the period of discovering new superconducting materials. In recent years, machine learning has been increasingly applied to materials science. Based on this, this manuscript proposes the use of XGBoost model to identify superconductors; the first application of deep forest model to predict the critical temperature of superconductors; the first application of deep forest to predict the band gap of materials; and application of a new sub-network model to predict the Fermi energy level of materials. Compared with our known similar literature, all the above algorithms reach state-of-the-art. Finally, this manuscript uses the above models to search the COD public dataset and identify 50 candidate superconducting materials with possible critical temperature greater than 90 K.

The collision system and multiplicity dependence of chemical freeze-out temperature (T_{rm ch}) and strangeness saturation factor (γ_{s}) are obtained by studying the particle ratios at the Large Hadron Collider (LHC) energies. Here, we consider the new results in pp at 13 TeV, p+Pb at s_{rm NN} = 5.02 TeV, Xe+Xe at s_{rm NN} = 5.44 TeV and Pb+Pb at s_{rm NN} = 5.02 TeV along with the earlier results in pp at s = 7 TeV and Pb+Pb at s_{rm NN} = 2.76 TeV. A statistical thermal model is used to extract the chemical freeze-out parameters in different multiplicity classes. To understand the particle production from small to large collision systems two ensembles namely, canonical and grand canonical have been considered in this study. A clear observation of multiplicity dependence of T_{rm ch} and γ_{s} is observed. The values obtained in high-multiplicity pp collisions are found to be similar to the peripheral Pb+Pb collisions. A final state midrapidity charged particle multiplicity density of around 20-30 appears to be a threshold below which, the chemical freeze-out temperature is lower than the kinetic freeze-out temperature.

Pressure, together with temperature and magnetic field, is an important thermodynamical parameter in physics. Investigating the response of a compound or of a material to pressure allows to elucidate ground states, investigate their interplay and interactions and determine microscopic parameters. Pressure tuning is used to establish phase diagrams, study phase transitions and identify critical points. Muon spin rotation/relaxation (muSR) is now a standard technique making increasing significant contribution in condensed matter physics, material science research and other fields. In this review, we will discuss specific requirements and challenges to perform muSR experiments under pressure, introduce the high-pressure muon facility at the Paul Scherrer Institute (PSI, Switzerland) and present selected results obtained by combining the sensitivity of the muSR technique with pressure.

Scientific experimentation, a cornerstone of human progress, demands rigor in reliability, methodical control, and interpretability to yield meaningful results. Despite the growing capabilities of large language models (LLMs) in automating different aspects of the scientific process, automating rigorous experimentation remains a significant challenge. To address this gap, we propose Curie, an AI agent framework designed to embed rigor into the experimentation process through three key components: an intra-agent rigor module to enhance reliability, an inter-agent rigor module to maintain methodical control, and an experiment knowledge module to enhance interpretability. To evaluate Curie, we design a novel experimental benchmark composed of 46 questions across four computer science domains, derived from influential research papers, and widely adopted open-source projects. Compared to the strongest baseline tested, we achieve a 3.4times improvement in correctly answering experimental questions.Curie is open-sourced at https://github.com/Just-Curieous/Curie.

We develop a multi-step workflow for the discovery of conventional superconductors, starting with a Bardeen Cooper Schrieffer inspired pre-screening of 1736 materials with high Debye temperature and electronic density of states. Next, we perform electron-phonon coupling calculations for 1058 of them to establish a large and systematic database of BCS superconducting properties. Using the McMillan-Allen-Dynes formula, we identify 105 dynamically stable materials with transition temperatures, Tc>5 K. Additionally, we analyze trends in our dataset and individual materials including MoN, VC, VTe, KB6, Ru3NbC, V3Pt, ScN, LaN2, RuO2, and TaC. We demonstrate that deep-learning(DL) models can predict superconductor properties faster than direct first principles computations. Notably, we find that by predicting the Eliashberg function as an intermediate quantity, we can improve model performance versus a direct DL prediction of Tc. We apply the trained models on the crystallographic open database and pre-screen candidates for further DFT calculations.

The concentration of radon in the air has been measured in the 700 m-deep Yangyang underground laboratory between October 2004 and May 2022. The average concentrations in two experimental areas, called A6 and A5, were measured to be 53.4pm0.2 Bq/m3 and 33.5pm0.1 Bq/m3, respectively. The lower value in the A5 area reflects the presence of better temperature control and ventilation. The radon concentrations sampled within the two A5 experimental rooms' air are found to be correlated to the local surface temperature outside of the rooms, with correlation coefficients r = 0.22 and r = 0.70. Therefore, the radon concentrations display a seasonal variation, because the local temperature driven by the overground season influences air ventilation in the experimental areas. A fit on the annual residual concentrations finds that the amplitude occurs each year on August, 31pm6 days.

The FRIB heavy-ion accelerator, commissioned in 2022, is a leading facility for producing rare isotope beams (RIBs) and exploring nuclei beyond the limits of stability. These RIBs are produced via reactions between stable primary beams and a graphite target. Approximately 20-40 \% of the primary beam power is deposited in the target, requiring efficient thermal dissipation. Currently, FRIB operates with a primary beam power of up to 20 kW. To enhance thermal dissipation efficiency, a single-slice rotating graphite target with a diameter of approximately 30 cm is employed. The effective target region is a 1 cm-wide outer rim of the graphite disc. To achieve high RIB production rates, the areal thickness variation must be constrained within 2 \%. This paper presents physical thickness characterizations of FRIB production targets with various nominal thicknesses, measured using a custom-built non-contact thickness measurement apparatus.

The magnetic phase diagram at zero external field of an ensemble of dipoles with uniaxial anisotropy on a FCC lattice is investigated from tempered Monte Carlo simulations. The uniaxial anisotropy is characterized by a random distribution of easy axes and its magnitude lambda_u is the driving force of disorder and consequently frustration. The phase diagram, separating the paramagnetic, ferromagnetic, quasi long range ordered ferromagnetic and spin-glass regions is thus considered in the temperature, lambda_u plane. This system is aimed at modeling the magnetic phase diagram of supracrystals of magnetic nanoparticles.

In geometrically frustrated magnetic systems, weak interactions or slight changes to the structure can tip the delicate balance of exchange interactions, sending the system into a different ground state. Brochantite, Cu_4SO_4(OH)_6, has a copper sublattice composed of distorted triangles, making it a likely host for frustrated magnetism, but exhibits stacking disorder. The lack of synthetic single crystals has limited research on the magnetism in brochantite to powders and natural mineral crystals. We grew crystals which we find to be a new polytype with a tendency toward ABAC stacking and some anion disorder, alongside the expected stacking disorder. Comparison to previous results on natural mineral specimens suggests that cation disorder is more deleterious to the magnetism than anion and stacking disorder. Our specific heat data suggest a double transition on cooling into the magnetically ordered state.

The optical properties of the superconducting K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 single crystals with a critical temperature T_capprox 26 K have been measured in the {\it ab} plane in a wide frequency range using both infrared Fourier-transform spectroscopy and spectroscopic ellipsometry at temperatures of 4--300 K. The normal-state reflectance of K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 is analyzed using a Drude-Lorentz model with one Drude component. The temperature dependences of the plasma frequency, optical conductivity, scattering rate, and dc resistivity of the Drude contribution in the normal state are presented. In the superconducting state, we observe a signature of the superconducting gap opening at 2Δ(5~K) = 11.8~meV. An abrupt decrease in the low-frequency dielectric permittivity varepsilon _1(ω) at T < T_c also evidences the formation of the superconducting condensate. The superconducting plasma frequency ω_{pl,s} = (213pm 5)~cm^{-1} and the magnetic penetration depth λ=(7.5pm 0.2)~μm at T=5~K are determined.

We report on studies of the superconducting and normal state properties of the noncentrosymmetric superconductor BeAu under hydrostatic pressure conditions. The room-temperature equation of state (EOS) reveals the values of the bulk modulus (B_0) and its first derivative (B^prime_0) at ambient pressure to be B_0 simeq 132~GPa and B^prime_0 simeq 30, respectively. Up to the highest pressures studied (p simeq 2.2~GPa), BeAu remains a multi-gap type-I superconductor. The analysis of B_{rm c}(T, p) data within the self-consistent two-gap approach suggests the presence of two superconducting energy gaps, with the gap-to-T_{rm c} ratios Δ_1/k_{rm B}T_{rm c} sim 2.3 and Δ_2/k_{rm B}T_{rm c} sim 1.1 for the larger and smaller gaps, respectively [Δ= Δ(0) is the zero-temperature value of the gap and k_{rm B} is the Boltzmann constant]. With increasing pressure, Δ_1/k_{rm B}T_{rm c} increases while Δ_2/k_{rm B}T_{rm c} decreases, suggesting that pressure enhances (weakens) the coupling strength between the superconducting carriers within the bands where the larger (smaller) superconducting energy gap has opened. The superconducting transition temperature T_{rm c}, black{the zero-temperature values of the superconducting gaps Δ_1 and Δ_2} and the zero-temperature value of the thermodynamic critical field B_{rm c}(0) decrease with increasing pressure, with the rates of {rm d}T_{rm c}/{rm d}p simeq -0.195~K/GPa, black{{rm d}Δ_1/{rm d}p simeq -0.034~meV/GPa, {rm d}Δ_2/{rm d}p simeq -0.029~meV/GPa,} and {rm d}B_{rm c}(0)/{rm d}p = -2.65(1)~mT/GPa, respectively. The measured B_{rm c}(0) values plotted as a function of T_{rm c} follow an empirical scaling relation established for conventional type-I superconductors.

For the first time in the world, we succeeded in synthesizing the room-temperature superconductor (T_c ge 400 K, 127^circC) working at ambient pressure with a modified lead-apatite (LK-99) structure. The superconductivity of LK-99 is proved with the Critical temperature (T_c), Zero-resistivity, Critical current (I_c), Critical magnetic field (H_c), and the Meissner effect. The superconductivity of LK-99 originates from minute structural distortion by a slight volume shrinkage (0.48 %), not by external factors such as temperature and pressure. The shrinkage is caused by Cu^{2+} substitution of Pb^{2+}(2) ions in the insulating network of Pb(2)-phosphate and it generates the stress. It concurrently transfers to Pb(1) of the cylindrical column resulting in distortion of the cylindrical column interface, which creates superconducting quantum wells (SQWs) in the interface. The heat capacity results indicated that the new model is suitable for explaining the superconductivity of LK-99. The unique structure of LK-99 that allows the minute distorted structure to be maintained in the interfaces is the most important factor that LK-99 maintains and exhibits superconductivity at room temperatures and ambient pressure.

The discovery of high-temperature superconducting materials holds great significance for human industry and daily life. In recent years, research on predicting superconducting transition temperatures using artificial intelligence~(AI) has gained popularity, with most of these tools claiming to achieve remarkable accuracy. However, the lack of widely accepted benchmark datasets in this field has severely hindered fair comparisons between different AI algorithms and impeded further advancement of these methods. In this work, we present the HTSC-2025, an ambient-pressure high-temperature superconducting benchmark dataset. This comprehensive compilation encompasses theoretically predicted superconducting materials discovered by theoretical physicists from 2023 to 2025 based on BCS superconductivity theory, including the renowned X_2YH_6 system, perovskite MXH_3 system, M_3XH_8 system, cage-like BCN-doped metal atomic systems derived from LaH_{10} structural evolution, and two-dimensional honeycomb-structured systems evolving from MgB_2. The HTSC-2025 benchmark has been open-sourced at https://github.com/xqh19970407/HTSC-2025 and will be continuously updated. This benchmark holds significant importance for accelerating the discovery of superconducting materials using AI-based methods.

The thermal relaxation time of neutron stars, typically defined by a sudden drop in surface temperature, is usually on the order of 10 to 100 years. In this study, we investigate neutron star thermal relaxation by incorporating nucleon superfluidity and non-nucleonic particles, specifically considering hyperons as a representative case. We find that rapidly cooling neutron stars driven by neutron superfluidity and direct Urca processes demonstrate delayed thermal relaxation under specific physical conditions. The former acquires that the neutron ^3P_2 critical temperature is small enough, whereas the latter depends on the presence of a small core that permits direct Urca processes. To explore these scenarios, we propose simple theoretical frameworks to describe these delayed thermal relaxation behaviors and discuss how an recently-established enhanced modified Urca rate influences the relaxation time. By confronting the theoretical results with the observation of Cassiopeia A, we can effectively constrain the maximum neutron ^3P_2 critical temperature.

Future HEP experiments present stringent challenges to calorimeter materials in radiation tolerance, time response and project cost. The 2019 report of the DOE Basic Research Needs Study on High Energy Physics Detector Research and Development points out three priority research directions for future calorimetry. Following these research directions letters of interest were submitted to the Snowmass organized by the Division of Particles and Fields of the American Physics Society. This report summarizes materials to be developed in the form of inorganic, liquid (oil- and water-based), and plastic scintillators and wavelength shifters to advance HEP calorimetry to face the challenges in radiation hardness, fast timing, and cost-effectiveness. Some of these materials may also find applications for future HEP time-of-flight system, and beyond HEP in nuclear physics, hard X-ray imaging and medical instruments.

The thermal properties are one of the key parameters to control phase purity and microstructure of polycrystalline materials. The melting point of the iron-based BaFe2As2 superconductor (Ba122), which foresees high-field applications, remains controversial. In this work, thermogravimetry-differential scanning calorimetry measurements (TG-DSC) of undoped and Co-doped Ba122 were carried out. Mixtures of elemental metals and pre-reacted Ba122 powders were prepared to investigate the thermal responses during in situ and ex situ synthesis routes, respectively. In addition, the phases and microstructures of the quenched samples were evaluated to elucidate the observed exothermic/endothermic peaks. Our results suggest that the melting point of Ba122 is ~1300°C.

We perform a Monte Carlo analysis of the Ising model on many three-dimensional lattices. By means of finite-size scaling we obtain the critical points and determine the scaling dimensions. As expected, the critical exponents agree with the three-dimensional Ising universality class for all models. The irrelevant field, as revealed by the correction-to-scaling amplitudes, appears to be relatively large. Combining the Monte Carlo results for the hydrogen peroxide lattice with those for five other three-dimensional lattices, we obtain a set of data covering a wide range of the irrelevant temperature field. This is helpful in the determination of the parameters describing the corrections to scaling. As a consequence, new results are obtained for the universal parameters describing Ising criticality in three dimensions, with reduced error margins in comparison with earlier Monte Carlo analyses. The critical exponents describing the thermodynamic singularities are determined by the temperature renormalization exponent y_t = 1.58693 (9) and the magnetic renormalization exponent y_h = 2.48178 (5). The corrections to scaling are governed by the irrelevant exponent y_1 = -0.821 (5).

Prediction of critical temperature (T_c) of a superconductor remains a significant challenge in condensed matter physics. While the BCS theory explains superconductivity in conventional superconductors, there is no framework to predict T_c of unconventional, higher T_{c} superconductors. Quantum Structure Diagrams (QSD) were successful in establishing structure-property relationship for superconductors, quasicrystals, and ferroelectric materials starting from chemical composition. Building on the QSD ideas, we demonstrate that the principal component analysis of superconductivity data uncovers the clustering of various classes of superconductors. We use machine learning analysis and cleaned databases of superconductors to develop predictive models of T_c of a superconductor using its chemical composition. Earlier studies relied on datasets with inconsistencies, leading to suboptimal predictions. To address this, we introduce a data-cleaning workflow to enhance the statistical quality of superconducting databases by eliminating redundancies and resolving inconsistencies. With this improvised database, we apply a supervised machine learning framework and develop a Random Forest model to predict superconductivity and T_c as a function of descriptors motivated from Quantum Structure Diagrams. We demonstrate that this model generalizes effectively in reasonably accurate prediction of T_{c} of compounds outside the database. We further employ our model to systematically screen materials across materials databases as well as various chemically plausible combinations of elements and predict Tl_{5}Ba_{6}Ca_{6}Cu_{9}O_{29} to exhibit superconductivity with a T_{c} sim 105 K. Being based on the descriptors used in QSD's, our model bypasses structural information and predicts T_{c} merely from the chemical composition.

The automatic extraction of materials and related properties from the scientific literature is gaining attention in data-driven materials science (Materials Informatics). In this paper, we discuss Grobid-superconductors, our solution for automatically extracting superconductor material names and respective properties from text. Built as a Grobid module, it combines machine learning and heuristic approaches in a multi-step architecture that supports input data as raw text or PDF documents. Using Grobid-superconductors, we built SuperCon2, a database of 40324 materials and properties records from 37700 papers. The material (or sample) information is represented by name, chemical formula, and material class, and is characterized by shape, doping, substitution variables for components, and substrate as adjoined information. The properties include the Tc superconducting critical temperature and, when available, applied pressure with the Tc measurement method.

We prepared Na_xTO_2 (T = Mn, Co) nanostructures to use as cathode material in Na-ion batteries. The Rietveld refinement of x-ray diffraction data confirms the hexagonal symmetry. Scanning and transmission electron microscopy measurements show hexagonal and rod-shape morphology for T = Co and Mn, respectively. The magnetic measurements indicate the presence of variable oxidation states of Mn/Co ions, but no long range ordering till 5~K. We find that the Na_{0.6}MnO_2 is highly insulating whereas Na_{0.7}CoO_2 is semiconducting in nature. The conduction in Na_{0.7}CoO_2 takes place through both variable range hopping (VRH) as well as activation mechanisms in different temperature ranges. However, for Na_{0.6}MnO_2 the VRH prevails at elevated temperatures. Furthermore, the coin cells have been fabricated and tested the electrochemical behavior using cyclic voltammetry, which confirms the reversibility of Na--ions during intercalation/de-intercalation.

Recent experiments on 2D superconductors allow the characterization of the critical temperature and of the phase diagram across the BCS-BEC crossover as a function of density. We obtain from these experiments the microscopic parameters of the superconducting state at low temperatures by the BCS mean-field approach. For Li_xZrNCl, the extracted parameters are used to evaluate the superconducting phase stiffness and the Berezinskii-Kosterlitz-Thouless (BKT) critical temperature throughout the BCS-BEC crossover, by implementing the corresponding Renormalization Group (RG) approach. In this way, we make a quantitative test of the predictive power of the BKT theory for evaluating the critical temperature. The RG flow equations turn out to give a sizable renormalization of the phase stiffness and of the critical temperature, which is crucial to obtain a satisfactory agreement between the BKT theory and the experiments, in particular in the BCS-BEC crossover regime. We predict the temperature range where phase stiffness renormalization can be measured in Li_xZrNCl across the BCS-BEC crossover. Contrary to other microscopic theories of superconductivity, we find that the BKT theory can be exploited to evaluate quantitatively the critical temperature of 2D superconductors in different pairing regimes.